|
|
动态再结晶特征及其对黄铜腐蚀敏感性的影响 |
赵月红,林乐耘,王振海 |
北京有色金属研究总院 北京 100088 |
|
CHARACTERISTIC OF DYNAMIC RECRYSTALLIZATION AND ITS INFLUENCE ON CORROSION SENSITIVITY OF COPPER ALLOY |
ZHAO Yuehong, LIN Leyun, WANG Zhenhai |
Beijing General Research Institute for Nonferrous Metals, Beijing 100088 |
[1] Esteban P B. A continuum theory for dynamic recrystallization with microstructure-related length scales[J].Intern. J. Plast., 1998, 14(4): 319-353[2] Gourdet S, Montheillet F. A model of continuous dynamic recrystallization[J]. Acta Mater., 2003, 51(9): 2685-2699[3] Taku S. Dynamic recrystallization microstructures under hot working conditions[J]. J. Mater. Process. Technol., 1995,53(1-2): 349-361[4] Zhang L W, Lu Y, Deng X H. Simulation of effect of nucleation mechanism on dynamic recrystallization process[J]. J.Dalian Univ. Technol., 2008, 48(3): 351-355 (张立文, 卢瑜,邓小虎, 不同形核机制下对动态再结晶过程模拟研究[J]. 大连理工大学学报,2008, 48(3): 351-355)[5] Manonukul A, Dunne P E. Initiation of dynamic recrystallization under inhomogeneous stress states in pure copper[J]. Acta Mater., 1999, 47(17): 4339-4354[6] Gao W, Belyakov A, Miura H, et al. Dynamic recrystallization of copper polycrystals with different purities[J].Mater. Sci. Eng., 1999, A256: 233-239[7] Wusatowska-Sarnek A M, Miura H. Nucleation and microtexture development under dynamic recrystallization of copper[J]. Mater. Sci. Eng., 2002, A323: 177-186[8] Mao W M,Zhao X B. Recrystallization and Grain Growing of Metal Material [M]. Beijing: Metallurgical Industry Press, 1994:12-18 (毛卫民, 赵新兵. 金属材料的再结晶和晶粒长大[M]. 北京:冶金工业出版社, 1994: 12-18)[9] Shi F J, Wang J M, Xu X J. The investigation of equal channel angular pressing[J]. Hot Working Technol., 2003, (1): 51-53 (石凤健, 汪建敏, 许晓静. 等截面角形挤压的研究内容及现状[J].热加工工艺, 2003, (1): 51-53)[10] Wang J M, Xu X J, Shi F J. Investigation on ultra-fine grain copper by equal channel angular pressing[J]. Hot Working Technol., 2004, (7): 6-10 (汪建敏, 许晓静, 石凤健.等径角挤压获得超细晶铜的研究[J]. 热加工工艺, 2004, (7): 6-10)[11] Wang D S , Hou Y W. Investigation of grain refinement on brass processed by ECAP[J]. Forg. Stamp. Technol., 2006, (2): 39-42 (王德胜,侯英玮. ECAP 法对H62黄铜的晶粒细化研究[J]. 锻压技术,2006, (2): 39-42)[12] Shi F J, Wang J M, Xu X J. Study on recrystallization behavior of ultra-fine grain copper fabricated by equal channel angular pressing[J]. Hot Working Technol., 2005, 12: 24-26 (石凤健, 汪建敏, 许晓静. ECAP法制备超细晶铜的再结晶行为研究[J].热加工工艺, 2005, 12: 24-26)[13] Zhu Y Z Yang Y. Investigation of recrystallization behavior in rapid deformation[J]. Aluminium Working, 2000, 23(3):43-46 (朱远志, 杨扬.高速变形条件下的动态再结晶机制的研究进展[J]. 铝加工, 2000,23(3):43-46)[14] Yang Y, Cheng X L. Current status and trends in researches on adiabatic shearing[J]. Chin. J. Nonferrous Met., 2002,12(3): 401-408 (杨扬, 程信林.绝热剪切的研究现状及发展趋势[J]. 中国有色金属学报, 2002, 12(3):401-408)[15] Zhao D M, Dong Q M, Liu P, et al. Precipitation and recrystallization in Cu2Ni2Si alloy during aging treatment[J].Function Mater., 2002, 33(6): 618-621 (赵冬梅, 董企铭,刘平等. Cu-Ni-Si合金在时效过程中析出与再结晶行为[J]. 功能材料, 2002,33(6): 618-621)[16] Zhang D Q, He J W. On characterization of microstress measured by X-ray diffraction[J]. Acta Metall. Sin., 1998, 34(12):1273-1278 (张定铨, 何家文.关于X射线衍射法测定微观应力的表征值的讨论[J]. 金属学报, 1998,34(12): 1273-1278 |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|