Please wait a minute...
中国腐蚀与防护学报  2008, Vol. 28 Issue (5): 296-298          
  论文 本期目录 | 过刊浏览 |
PMMA/MMT纳米复合材料硫酸腐蚀研究
陈奎;杨瑞成;张天云
兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室
RESEARCH OF SULFURIC ACID CORROSION AND CORROSION PRODUCT OF POLY (METHYL METHACRYLATE)/ MONTMORILLONITE NANOCOMPOSITES
引用本文:

陈奎; 杨瑞成; 张天云 . PMMA/MMT纳米复合材料硫酸腐蚀研究[J]. 中国腐蚀与防护学报, 2008, 28(5): 296-298 .

全文: PDF(778 KB)  
摘要: 用XRD和TEM对聚甲基丙烯酸甲酯/KH-V6型蒙脱土(PMMA/KH-V6型MMT)纳米复合材料进行结构表征,用失重法研究其耐H2SO4腐蚀行为,并用FTIR和XPS分析腐蚀产物膜。结果表明,蒙脱土质量分数为3%时,以单片层剥离形式存在于PMMA基体中,试样的腐蚀速率是纯PMMA的34.2%;PMMA与复合材料的腐蚀产物主要成分均为C、H、O和S元素;蒙脱土的阻隔效应,使PMMA/3%KH-V6型MMT纳米复合材料中PMMA基体的降解行为减弱,腐蚀产物中C元素含量下降,O和S元素含量上升。
关键词 : 硫酸,  腐蚀,  聚甲基丙烯酸甲酯,  蒙脱土,  纳米复    
Abstract:The structure of poly (methyl methacrylate)/ montmorillonite (PMMA/MMT) nanocomposites was characterized by means of XRD and TEM. The sulfuric acid corrosion behavior of PMMA/MMT nanocomposites were studied using weight loss testing method, and the corrosion products were analyzed by FTIR and XPS. The solutions show that,exfoliated PMMA/MMT nanocomposites is made, and the corrosion rate of composites is 34.2 percent to PMMA when the mass fraction of MMT reaches 3 %. The corrosion products of both PMMA and its composites are C, H, O and S. Compared with the corrosion product of pure PMMA, C element content of the corrosion product of PMMA/ 3wt% MMT nanocomposites decreases while S and O elements increase introduced by the weaker of the degradation behavior of PMMA matrix for the barrier effect of MMT layer.
Key words: sulfuric acid    corrosion    poly (methyl methacrylate)    montmorillonite    nanocomposites
收稿日期: 2007-01-04     
ZTFLH:  TB337  
[1]Essawy H,Badram A,Youssef A,et al.Synthesis of poly(methyl-methacrylate)/montmorillonite nanocomposites via in situ intercala-tive suspension and emulsion polymerization[J].Polym.Bull.,2004,53(1):9-17
[2]Zou G,Fang K,He P S.Study on bulk intercalation polymeriza-tion of PMMA/montmorillonite intercalated nanocomposite by dy-namic torsional vibration method[J].J.Mater.Sci.Lett.,2002,21(10):761-763
[3]Panchatapa J,Charles A W.Effects of surfactants on the thermaland fire properties of poly(methyl methacrylate)/clay nanocompos-ites[J].Polym.Degradation Stab.,2005,88:401-406
[4]Zhang W A,Shen X F,Li Y,et al.Synthesis and characteriza-tion of poly(methyl methacrylate)/OMMT nanocomposites byγ-ray irradiation polymerization[J].Radiat.Phys.Chem.,2003,67(5):651-656
[5]Xu Y J,William J Brittain,Xue C C,et al.Effect of clay type onmorphology and thermal stability of PMMA-clay nanocompositesprepared by heterocoagulation method[J].Polymer,2004,45(11):3735-3746
[6]Chen K,Yang R C,Wu M L,et al.Percolation analysis of poly-mer-montmorillonite exfoliated nanocomposites[J].J.LanzhouUniv.Technol.,2006,32(1):41-45(陈奎,杨瑞成,吴明亮等.聚合物/蒙脱土剥离型纳米复合材料逾渗理论分析[J].兰州理工大学学报,2006,32(1):41-45)
[7]Chen K,Yang R C,Cheng S W.The kinetic analysis of thermaldecomposition of PMMA/MMT nanocomposites[J].Key Eng.Mater.,2007,353-358:1366-1369
[8]Chen K,Yang R C,Zhang T Y.Preparation and friction and wearbehavior of PMMA/OMMT composites[J].Tribology,2007,27(2):187-191(陈奎,杨瑞成,张天云.PMMA/纳米OMMT复合材料的制备及其摩擦磨损性能研究[J].摩擦学学报,2007,27(2):187-191)
[9]Wagner C D,Davis L E,Zeller M V,et al.Empirical atomic sen-sitivity factors for quantitative analysis by electrospectroscopy forchemical analysis[J].Surf.Int.Anal.,1981,3(5):211-225
[1] 黎敏, 魏高飞, 邓书端, 李向红. 扫描电化学显微镜(SECM)在缓蚀剂研究中的进展与展望[J]. 中国腐蚀与防护学报, 2026, 46(5): 1326-1342.
[2] 谢敬礼, 王友志, 乔书振, 牛佳雨, 郝龙, 曹胜飞, 王俭秋. 高放废物地质处置库近场环境中碳钢腐蚀产物演化研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1343-1352.
[3] 周书宇, 刘昌璞, 杨留洋, 耿杰, 范海明, 张大磊, 鞠虹. 在超临界CO2 工况和典型环境因素共影响下的管线钢腐蚀及防护技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1353-1368.
[4] 黄绘, 李树丽, 邓书端, 李向红. 自修复材料在防护涂层中的研究进展及展望[J]. 中国腐蚀与防护学报, 2026, 46(5): 1369-1388.
[5] 曾崎, 虞文军, 门向南, 冯保净, 杨耀, 朱凯, 葛玉麟, 应韬, 曾小勤. 高强耐蚀稀土镁合金研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1415-1424.
[6] 张强, 卢壹梁, 金焱, 陈云, 杨丙坤, 王晓芳, 韩钰. 环境腐蚀性分级及大气/土壤腐蚀性地图绘制技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1425-1436.
[7] 许佳程, 刘家兵, 黄诗雨, 金灵好, 谭伟, 郭娜, 刘涛. 人工极地海域环境致EH40船板钢的力学性能损伤与应力腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1437-1451.
[8] 郑凯, 王艺陶, 王东胜, 刘伟, 蒋颖畅, 黄嵘, 常雪婷. 腐蚀-应力耦合作用对极地船用螺旋桨低碳马氏体不锈钢失效机理影响研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1452-1462.
[9] 唐敏, 杜鹏飞, 徐娟, 雷然, 李幸鑫, 李向红. 外来入侵物种鬼针草提取物对ST12钢在H2SO4 介质中的缓蚀作用及机理[J]. 中国腐蚀与防护学报, 2026, 46(5): 1485-1496.
[10] 齐晓涵, 翟海民, 李文生, 洪昊, 曹元, 俞雷, 陈博瀚. Al2O3 磨加量对铝合金搪瓷涂层组织结构及腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1497-1507.
[11] 贾梦瑶, 张伟强, 王媛, 谭季波, 邱建科, 郝延天, 吴欣强. 在3.5%NaCl溶液中压力变化对Ti80合金应力腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1508-1516.
[12] 李晓峰, 李艳茹, 卢云飞, 张泰华, 常雪婷, 安燕. 力学与防腐性能协同增强的聚吡咯改性芳纶纤维/环氧复合涂料[J]. 中国腐蚀与防护学报, 2026, 46(5): 1517-1526.
[13] 曹天慧, 杨砚淇, 刘雨薇, 吴磊, 郭泉忠, 贾志刚, 曹公望, 汪川. 23MnNiMoCr54钢在不同pH的模拟高矿化水中腐蚀机理研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1537-1548.
[14] 赵先锐, 戴中国, 李战江, 徐育烺, 张会霞, 李旺. 添加Y、Hf对AlCoCrFeNi高熵合金涂层在NaCl溶液中的腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1549-1559.
[15] 王兴斌, 李家民, 伍登骏, 唐伟能, 杨静, 郭嘉成, 杨欣宇, 侯娟. Al含量对Mg-xAl-Zn合金耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1560-1568.