Please wait a minute...
中国腐蚀与防护学报  2008, Vol. 28 Issue (2): 121-128     
  综述 本期目录 | 过刊浏览 |
不锈钢耐蚀装饰膜的性能检测
唐子龙
天津大学;材料科学与工程学院天津; 300072
Performance Evaluation Techniques of Film and Coating on Stainless Steel
天津大学;材料科学与工程学院天津; 300072
全文: PDF(1810 KB)  
摘要: 综述了检测不锈钢耐蚀装饰膜层的各种性能的方法。首先介绍有关的国标、ASTM和DIN标准,然后讨论已有的各种测试和评价方法相互之间及与标准的差异。分析了侵蚀性介质在性能评价中的作用。提出了新的测试方法和评价方案。
关键词 不锈钢耐蚀膜装饰膜性能检测    
Abstract:performance evaluation techniques of coating and film on stainless steel are reviewed. The film and coating on stainless steel covered in this paper are colored film prepared by either by electrochemically or chem?鄄ically, passive film after polishing and cleaning, thermal barrier and ceramic coating and so on. Detail discus?鄄sion of each technique is focused on the suitability, reliability and performance indicator(s) an evaluation pro?鄄cess could generate. Additional performance indicator if available and not mentioned in previous researches is al?鄄so suggested by authors with an intension to extend the existed technique and generate more performance infor?鄄mation. At the end of each category, the applicable ISO, ASTM, DIN and GB standards are discussed and com?鄄pared for encouragement of the possible adoption of standards.
Key wordsStainless Steel    Corrosion Resistance Film    Decoration Film    Evaluation Technique
收稿日期: 2006-07-06     
通讯作者: 唐子龙      E-mail: zlt633@tju.edu.cn

引用本文:

唐子龙 . 不锈钢耐蚀装饰膜的性能检测[J]. 中国腐蚀与防护学报, 2008, 28(2): 121-128 .

链接本文:

https://www.jcscp.org/CN/Y2008/V28/I2/121

[1]Guo Z H,Jia F L,Qiu Y B.Study of coloring of stainless steel bytriangular current scan method[J].Electroplat.Pollut.Control,2000,20(4):21-23(郭稚弧,贾法龙,邱于兵.三角波电流扫描法制备彩色不锈钢的研究[J].电镀与环保,2000,20(4):21-23)
[2]Zhang J X,Wei Z F,Qiao Y N,et al.A new process for stainlesssteel coloring[J].Corros.Prot.,2004,25(1):13-16(张俊喜,魏增福,乔亦男等.不锈钢着色的绿色工艺研究[J].腐蚀与防护,2004,25(1):13-16)
[3]Jia F L,Guo Z H,Li Z M.Coloration of stainless steel by square-wave current of low frequency[J].Corros.Prot.,2001,22(3):105-108(贾法龙,郭稚弧,李卓民.低频方波电流进行不锈钢电解着色的研究[J].腐蚀与防护,2001,22(3):105-108)
[4]Song G L,Cao C N,Lin H C.Effects of alternating voltage mod-ulating passivation and posttreatment on the passive film of stain-less steel[J].J.Appl.Chem.,1992,9(1):79-81(宋光铃,曹楚南,林海潮.载波钝化和钼酸盐后处理对不锈钢钝化膜性能的影响[J].应用化学,1992,9(1):79-81)
[5]Du T B,Yu J K.Study on stability of passive film on stainless steelby alternating voltage passivation[J].Mater.Prot.,1997,30(4):1(杜天宝,俞家康.载波不锈钢钝化膜稳定性的研究[J].材料保护,1997,30(4):1)
[6]Wang X H,Ma J B,Li Z Q.Development and application of col-ored stainless steel[J].Stainless Steel,2005,(11):22-25(王喜洪,马金保,李志清.彩色不锈钢的开发应用[J].不锈钢,2005,(11):22-25)
[7]Guo Z H,Wang H R,Jia F L.New technique of stainless steelcoloring[J].Mater.Prot.,2000,33(5):32-35(郭稚弧,王海人,贾法龙.不锈钢着色新技术的研究[J].材料保护,2000,33(5):32-35)
[8]Conrrado R,Bocchi N.Corrosion resistance of colored films grownon stainless steel by the alternating potential pulse method[J].Electrochim.Acta,2003,48:2417-2424
[9]Zhou Y Y,Wu J M.Stainless steel coloring at constant potential[J].Mater.Prot.,1997,30(1):38(周一扬,吴继民.不锈钢恒电位方波充电法着色[J].材料保护,1997,30(1):38)
[10]Chen W,Chen R Y.Study on black coloring of aluminum alloysurface[J].Plat.Finish.,2002,22(6):5-7(程蔚,陈日耀.铝合金表面着亮黑色的研究[J].电镀与精饰,2002,22(6):5-7)
[11]Li Q,Chen Y.Corrosion resistance of metals coated with ceramicfilms[J].Dev.App.Mater.,1999,14(6):47-50(李青,陈艳.金属陶瓷涂层耐蚀性能研究[J].材料开发与应用,1999,14(6):47-50)
[12]Liang C H,Shao X R.Electrolytic coloring technology of stainlesssteel and its electrochemical behavior[J].Plat.Finish.,2000,22(1):5-8(梁成浩,邵新荣.不锈钢电解着色工艺及电化学性能[J].电镀与精饰,2000,22(1):5-8)
[13]Jia F L,Guo Z H.Study on the film of electrochemically coloredstainless steel[J].Electroplat.Pollut.Control,2001,21(3):22-25(贾法龙,郭稚弧.不锈钢电化学着色膜的研究[J].电镀与环保,2001,21(3):22-25)
[14]Sun Q,Gu X Q.Study on anticorrosion performance of stainlesssteel[J].Mater.Prot.,1983,(3):3(孙奇,顾小青.彩色不锈钢耐蚀性能研究[J].材料保护,1983,(3):3)
[15]Wu H.Influences on coloring of stainless steel[J].Electroplat.Finish.,2004,23(1):54-55(吴昊.影响不锈钢着色的因素[J].电镀与涂饰,2004,23(1):54-55)
[16]Li Y Y,Zhang W X.Study on golden coloring on stainless steel[J].Mater.Prot.,1999,32(9):12-14(李瑜煜,张文雄.不锈钢阳极氧化着金黄色技术的研究[J].材料保护,1999,32(9):12-14)
[17]Ouyang G,Zhuo D J,Yang Q F.Coloring technique of platestainless steel[J].Mater.Prot.,2003,36(1):44-45(欧阳贵,左丹江,羊秋福.平板不锈钢着色工艺[J].材料保护,2003,36(1):44-45)
[18]Jin G,Zhang X P,Bi J Z.A study on stainless steel coloring tech-nology[J].Plat.Finish.,2004,26(6):23-26(金光,张学萍,毕监智.不锈钢着色工艺研究[J].电镀与精饰,2004,26(6):23-26)
[19]Li G B,Jiang Y F,Gu C L.A Study on stainless steel chemicalcoloring technology[J].Surf.Technol.,1996,25(5):26-28(李国彬,姜延飞,谷春瑞.不锈钢化学着色工艺研究[J].表面技术,1996,25(5):26-28)
[20]Mei S Y,Zhou Y K.Wear-resistance of color film on stainlesssteel[J].Mater.Prot.,2000,33(11):10(梅世云,周元康.不锈钢着色膜的耐磨性[J].材料保护,2000,33(11):10)
[21]Yang X Y,Gong Z Q,Chen B Z.Surface chemical coloring ofstainless steel for cooking utensil[J].Surf.Technol.,2005,34(2):53-55(杨喜云,龚竹青,陈白珍.厨具不锈钢的表面化学着色[J].表面技术,2005,34(2):53-55)
[22]Wang B.Study on wear-resistance of Al alloyed with rare metal[J].Rare Metals and Cemented Carbides,1991,3(104):21-23(王冰.稀土铝着色膜耐磨性的研究[J].稀有金属与硬质合金,1991,3(104):21-23)
[23]Wang C T.Technology research on imitating stainless steel color-ing on Al and its alloys for construction[J].J.Zhejiang Ocean U-niv.(Natural Science Edition),2001,20(2):147-150(王春涛.建筑铝材仿不锈钢着色工艺研究[J].浙江海洋学院学报,2001,20(2):147-150)
[24]Chen Y Z,Yang C M,Zhu L Q.Study on corrosion resistance ofthe A3 steel treated by a water borne silicone emulsion[J].Surf.Technol.,2006,35(1):17-20(陈贻炽,杨春梅,朱立群.聚硅氧烷水基乳液处理的A3钢的耐蚀性研究[J].表面技术,2006,35(1):17-20)
[25]Ma S L,Jian X T.Effects of electrochemistry polishing on textureand performance of 1Crl8Ni9Ti[J].Mater.Prot.,1998,31(8):26-29(马胜利,井晓天.电化学抛光对1Crl8Ni9Ti组织和性能的影响[J].材料保护,1998,31(8):26-29)
[26]Li N.Process control of the erode-proof performance of stainlesssteel vessel[J].Safe Technol.Pressure Container,2002,5:40-41(李宁.谈不锈钢压力容器的酸洗钝化[J].锅炉压力容器安全技术,2002,5:40-41)
[27]Liu C J,Shang W.Study on the chemical coloring of anodic oxi-dation film of Al and its alloy on different color condition[J].Surf.Technol.,2004,33(3):53-55(刘长久,尚伟.铝材化学法不同着色效果条件的研究.表面技术,2004,33(3):53-55)
[28]Wang M Q.Clean of stainless steel black skin at room tempera-ture[J].Surf.Technol.,l995,24(4):38-40(王茂全.不锈钢黑色氧化皮常温清洗[J].表面技术,l995,24(4):38-40)
[29]Cao J Q,Liu B G,Zhou Y.Electrochemistry polishing of weldedstainless steel[J].Mater.Prot.,2003,36(6):25-26(曹经倩,刘炳根,周雅.焊接不锈钢的电化学抛光[J].材料保护,2003,36(6):25-26)
[30]Fang J L,Liu Q.A study on blue MoO42-converting film on stain-less steel[J].Mater.Prot.,1995,28(5):3-5(方景礼,刘琴.不锈钢上蓝色钼酸盐转化膜的研究[J].材料保,1995,28(5):3-5)
[31]Zhang J X,Chen J,Qiao Y N.Colored passive file on 304 stain-less steel[J].J.Chin.Soc.Corros.Prot.,1998,18(4):311-315(张俊喜,陈健,乔亦男等.载波钝化电场条件不锈钢着色膜的影响[J].中国腐蚀与防护学报,1998,18(4):311-315)
[32]Vasconcelos K O,Bocchi N,Rocha-Filho R C,et al.An environ-mentally friendly and practical method for obtaining color onstainless steel by interference[J].J.Electrochem.Soc.,2005,152(11):B491-B494
[33]Qian S Q,Zhou Y F.Green zone of stainless steel coloring[J].Mater.Prot.,1991,24(11):9(钱家权,周玉幅.不锈钢着色存在绿色区[J].材料保护,1991,24(11):9)
[34]Neal W E J,Misa A H.The measurement of anodized layer thick-ness on 304 colored stainless steel[J].J.Surf.Technol.,1982,15(8):395
[35]Zhen N Z,Zhen D L.Processing investigation on black coloringof aluminum alloy No.1235 by two-step electrolytic method[J].J.Fujian Univ.Technol.,2004,2(4):402-405(郑乃贞,郑旦亮.1235铝合金二步电解法着黑色工艺研究[J].福建工程学院学报,2004,2(4):402-405)
[36]Zhang J X,Zhou G D.Study on the properties of colored filmformed on stainless steel by alternating voltage passivation[J].Mater.Prot.,2002,35(1):8-10(张俊喜,周国定.不锈钢载波钝化着色膜性质的研究[J].材料保护,2002,35(1):8-10)
[1] 冉斗, 孟惠民, 刘星, 李全德, 巩秀芳, 倪荣, 姜英, 龚显龙, 戴君, 隆彬. pH对14Cr12Ni3WMoV不锈钢在含氯溶液中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2021, 41(1): 51-59.
[2] 左勇, 曹明鹏, 申淼, 杨新梅. MgCl2-NaCl-KCl熔盐体系中金属Mg对316H不锈钢的缓蚀性能研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 80-86.
[3] 王欣彤, 陈旭, 韩镇泽, 李承媛, 王岐山. 硫酸盐还原菌作用下2205双相不锈钢在3.5%NaCl溶液中应力腐蚀开裂行为研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 43-50.
[4] 张浩, 杜楠, 周文杰, 王帅星, 赵晴. 模拟海水溶液中Fe3+对不锈钢点蚀的影响[J]. 中国腐蚀与防护学报, 2020, 40(6): 517-522.
[5] 马鸣蔚, 赵志浩, 荆思文, 于文峰, 谷义恩, 王旭, 吴明. 17-4 PH不锈钢在含SRB的模拟海水中的应力腐蚀开裂行为研究[J]. 中国腐蚀与防护学报, 2020, 40(6): 523-528.
[6] 赵柏杰, 范益, 李镇镇, 张博威, 程学群. 不同类型接触面对316L不锈钢缝隙腐蚀的影响[J]. 中国腐蚀与防护学报, 2020, 40(4): 332-341.
[7] 胡玉婷, 董鹏飞, 蒋立, 肖葵, 董超芳, 吴俊升, 李晓刚. 海洋大气环境下TC4钛合金与316L不锈钢铆接件腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 167-174.
[8] 秦越强, 左勇, 申淼. FLiNaK-CrF3/CrF2氧化还原缓冲熔盐体系对316L不锈钢耐蚀性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(2): 182-190.
[9] 何壮,王兴平,刘子涵,盛耀权,米梦芯,陈琳,张岩,李宇春. 316L和HR-2不锈钢在盐酸液膜环境中的钝化与点蚀[J]. 中国腐蚀与防护学报, 2020, 40(1): 17-24.
[10] 武栋才,韩培德. 中温时效处理对SAF2304双相不锈钢耐蚀性的影响[J]. 中国腐蚀与防护学报, 2020, 40(1): 51-56.
[11] 骆鸿,高书君,肖葵,董超芳,李晓刚. 磁控溅射工艺对CrN薄膜及其腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2019, 39(5): 423-430.
[12] 付安庆,赵密锋,李成政,白艳,朱文军,马磊,熊茂县,谢俊峰,雷晓维,吕乃欣. 激光表面熔凝对超级13Cr不锈钢组织与性能的影响研究[J]. 中国腐蚀与防护学报, 2019, 39(5): 446-452.
[13] 孙晓光,韩晓辉,张星爽,张志毅,李刚卿,董超芳. 超低碳奥氏体不锈钢焊接接头耐腐蚀性及环保型化学钝化工艺研究[J]. 中国腐蚀与防护学报, 2019, 39(4): 345-352.
[14] 李雨,关蕾,王冠,张波,柯伟. 机械应力对不锈钢点蚀行为的影响[J]. 中国腐蚀与防护学报, 2019, 39(3): 215-226.
[15] 李兆登,崔振东,侯相钰,高丽丽,王维珍,尹建华. 核级316LN不锈钢焊接接头在高温高压水中的腐蚀性能研究[J]. 中国腐蚀与防护学报, 2019, 39(2): 106-113.