|
|
CORROSION BEHAVIOUR OF POLYPROPYLENE IN ITACONIC ACID |
LONG Jin-ming FAN Ai-min SI Yun-sen ZHANG Xiao-yu (Kunming University of Science and Technology; Kunming 650093) |
|
|
Abstract The corrosion behaviour of polypropylene (PP) plastics was studied by examining the weight change, appearance, mechanical properties (hardness and impact strength) and molecular structure of specimens after immersion in itaconic acid aqueous solutions. It was found that the corrosion of PP plastics could be attributed to the diffusion and permeation of the media, dissolution of certain assistants and oxidation of PP resin, which were dependent on the composition and temperature of the media. As a result, the impact strength of the plastics decreased to some extent whereas the hardness remained almost unchanged. It could be concluded that the corrosion resistance of PP plastics in itaconic acid aqueous solutions was quite good.
|
Received: 25 April 1998
|
1 阎淑萍,任少锋.衣康酸的生产及其应用,现代化工,1995,(11):11 2 金其荣,张继同,徐勤.有机酸发酵工艺学,北京:轻工业出版社,1989.499 3 沈德言.红外光谱法在高分子研究中的应用,北京:科学出版社,1982.120 4 D.W.范克雷维伦著,许元泽等译.聚合物的性质,北京:科学出版社,1987.95 5 叶斌.塑料耐蚀性化学参数判据,腐蚀与防护,1986,(1):38 6 周卫华.硝酸对聚丙烯的晶间腐蚀,化工防脚蚀,1980,(5):1 7 W.L.霍金斯著,吕世光译.聚合物的稳定性,北京:轻工业出版社,1981.p53 9 化学工业部化工机械研究院编.腐蚀与防护手册-腐蚀理论·试验及监测,北京:化学工业出版社,1989.472 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|