|
|
Research on Reinforcement Corrosion in Concrete by Using Electrochemical Frequency Modulation Technology |
XU Chen, YUE Zengguo, JIN Weiliang |
Institute of Structural Engineering, Zhejiang University, Hangzhou 310058, China |
|
|
Abstract Reinforcement corrosion is a hot issue of the durability of concrete structures. In order to obtain more realistic reinforced corrosion kinetic parameters, Electrochemical Frequency Modulation technology was used in reinforced corrosion test. Compared with three-point method(one-way polarization) test results, test parameters of the Electrochemical Frequency Modulation technique was determined. The results showed that, for reinforced corrosion in concrete, Ba was in the range of 65 ~ 250 mV/ dec, lager than the value 30~120 mV/dec in solution. The polarization resistance RP and the corrosion current Icorr obtained by Electrochemical Frequency Modulation test was analyzed to amend the B value of the linear polarization method.
|
|
[1] Locke C E, Siman A. Electrochemistry of reinforcing steel in salt-contaminated concrete, Corrosion of Reinforcing Steel in Concrete [A]. ASTM STP713 [C]. Philadelphia, 1978: 3-16 [2] Alonso C, Andrade C, Izquierdo M, et al. Effect of protective oxide scales in the macrogalvanic behaviour ofconcrete reinforcements [J]. Corros. Sci., 1998, 40(8): 1379-1389 [3] Cao C N. Principles of Electrochemistry of Corrosion [M]. Beijing: Chemical Industry Press, 2004 (曹楚南. 腐蚀电化学原理 [M]. 北京: 化学工业出版社, 2004) [4] Bosch R W, Hubrecht J, Bogaerts W F, et al. Electrochemical frequency modulation: A new electrochemical technique for online corrosion monitoring [J]. Corrosion, 57(1): 60-71 [5] Esra Kus, Florian Mansfeld. An evaluation of the electrochemical frequency modulation (EFM) technique [J]. Corros.Sci., 2006, 48: 965-979 [6] Gerald S, Frankel. Electrochemical techniques in corrosion: Status, limitations, and needs [J]. J. ASTM Int., 2008, 5(2) [7] Han L, Song S Z, Zhang F. A Virtual instrument for corrosion rate measurement by electrochemical frequency modulation technique [J]. J. Chin. Soc. Corros. Prot., 2008, 28(2): 65-68 (韩磊, 宋诗哲, 张帆. 利用虚拟仪器实现电化学频率调制腐蚀速度检测 [J]. 中国腐蚀与防护学报, 2008, 28(2): 65-68) [8] Law D W, Cairns J, Millard S G, et al. Measurement of loss of steel from reinforcing bars in concrete using linear polarisation resistance measurements [J]. NDT E. Int., 2004, 37: 381-388
|
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|