INFLUENCE OF DIFFERENT HEAT TREATMENT ON CORROSION RESISTANCE OF G105 PIPE

J Chin Soc Corr Pro

2012, Vol. 32

Issue (1): 67-69 DOI:

Current Issue | Archive | Adv Search

INFLUENCE OF DIFFERENT HEAT TREATMENT ON CORROSION RESISTANCE OF G105 PIPE

HUANG Bensheng^1,2, JIANG Zhongying², PAN Huanhuan², YUAN Pengbin³, LIU Qingyou¹

1. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University,Chengdu 610500;\noindent
2. School of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610500
3. Shanghai Hilong Petroleum Tubular Goods Research Institute, Shanghai 200949

Download:

PDF(756KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the heat treatment process test of G105 pipe materials, the influence of different heat treatment on material microstructure and properties was studied by using electrochemical test and slow strain rate tensile test. The results show that material properties can meet the need of G105 pipe technical requirements after quenched at 890℃ and tempered at 620℃ or quenched at 890℃and tempered at 580℃; tempering temperature impacts the mechanical properties of materials, and the higher the tempering temperature, the stronger the ductility and the toughness; the microstructure after quenched at 890℃ and tempered at 620℃ is superior to that quenched at 890℃ and tempered at 580℃, and the former has better corrosion resistance.

Key words: heat treatment process microstructure corrosion resistance electrochemical test slow strain rate test

Received: 09 August 2010

ZTFLH:

TG174.2

Corresponding Authors: JIANG Zhongying E-mail: jiangzhongying85@126.com

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	HUANG Ben-Sheng
	JIANG Zhong-Yang
	PAN Huan-Huan
	YUAN Peng-Bin
	LIU Qing-You

Cite this article:

HUANG Bensheng, JIANG Zhongying, PAN Huanhuan, YUAN Pengbin, LIU Qingyou. INFLUENCE OF DIFFERENT HEAT TREATMENT ON CORROSION RESISTANCE OF G105 PIPE. J Chin Soc Corr Pro, 2012, 32(1): 67-69.

URL:

https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y2012/V32/I1/67

[1] Lu X. Heat Treatment Engineering [M]. Beijing: 2007: 1

    (陆兴. 热处理工程基础[M]. 北京: 机械工业出版社, 2007: 1)

[2] Li H. The influence of different heat treatment to corrosion resistance of the 35CrMo steel [J]. Total Corros. Control,2007, 21(5): 11-13

    (李惠.热处理工艺对35CrMo钢耐蚀性能的影响[J]. 全面腐蚀控制, 2007,21(5): 11-13)

[3] Wang S M. Experimental study on stress corrosion cracking of 2.25Cr1Mo steel in H₂S solution [J]. Sci. Technol. Inf.,2009, (19): 425-426

    (王申明.2.25Cr1Mo钢在硫化氢溶液中的应力腐蚀开裂研究[J]. 科技资讯, 2009,(19): 425-426)

[4] Zhou Y Z. Corrosion and protection of steel G105 for drill tools in saline slurries[J]. Corros. Sci. Prot. Technol., 2008,20(6): 424-428

    (周永璋.盐井钻井的盐水泥浆液中钻具的腐蚀与防护研究[J]. 腐蚀科学与防护技术,2008, 20(6): 424-428)

[5] Liu F G, Du M. Influence of ions in saltwaters on corrosion of G105 steel and analysis of corrosion product[J].Corros. Sci. Prot. Technol., 2008, 20(4): 310-312

    (刘福国,杜敏. 盐水中离子对G105钢腐蚀速率的影响及腐蚀产物分析[J].腐蚀科学与防护技术, 2008, 20(4): 310-312)

[6] Liu F G, Du M. Effect of new type compound inhibitor oninhibition behavior of steel G105 in NaCl solution[J]. Acta. Metall.Sin., 2007, 43(9): 989-993

    (刘福国, 杜敏.新型复配缓蚀剂对G105钢在NaCl溶液中缓蚀行为的影响[J]. 金属学报, 2007,43(9): 989-993)

[7] Fan D L. Heat Treatment Technology Data Manual [M]. Beijing: China Machine Press, 2006

    (樊东黎.热处理技术数据手册[M]. 北京: 机械工业出版社, 2006)

[8] Yan C P. 480 Cases for Heat-treatment Defect Analysis and Countermeasures of Typical Parts [M]. Beijing: China Machine Press,2008

    (阎承沛. 典型零件热处理缺陷分析及对策480例[M]. 北京:机械出版工业社, 2008)

[9] Standardization Administration of China. GBT12603-90 Classification and Designation on Metal Heat Treatment [M]. Beijing:China Machine Press, 2006

    (中国国家标准化管理委员会. GBT12603-90金属热处理工艺分类及代号[M]. 北京: 机械工业出版社, 2006)

[10] Hui W J, Dong H, Weng Y Q, et al. Effect of heat treatment parameters on mechanical properties of high strength Cr-Mo-V steel[J]. Acta Metall. Sin., 2002, 38(10): 1009-1014

     (惠卫军, 董瀚, 翁宇庆等.回火温度对Cr-Mo-V系高强度钢力学性能的影响[J]. 金属学报, 2002,38(10): 1009-1014)

[1]	TANG Rongmao, ZHU Yichen, LIU Guangming, LIU Yongqiang, LIU Xin, PEI Feng. Gray Correlative Degree Analysis of Q235 Steel/conductive Concrete Corrosion in Three Typical Soil Environments[J]. 中国腐蚀与防护学报, 2021, 41(1): 110-116.
[2]	HAN Yuetong, ZHANG Pengchao, SHI Jiefu, LI Ting, SUN Juncai. Surface Modification of TA1 Bipolar Plate for Proton Exchange Membrane Fuel Cell[J]. 中国腐蚀与防护学报, 2021, 41(1): 125-130.
[3]	SHI Kunyu, WU Weijin, ZHANG Yi, WAN Yi, YU Chuanhao. Electrochemical Properties of Nb Coating on TC4 Substrate in Simulated Body Solution[J]. 中国腐蚀与防护学报, 2021, 41(1): 71-79.
[4]	BAO Ren, ZHOU Genshu, LI Hongwei. Preparation of High-tin Bronze Corrosion-resistant Coating by Potentiostatic Pulse Electrodeposition[J]. 中国腐蚀与防护学报, 2020, 40(6): 585-591.
[5]	YU Haoran, ZHANG Wenli, CUI Zhongyu. Difference in Corrosion Behavior of Four Mg-alloys in Cl^--NH₄⁺-NO₃^- Containing Solution[J]. 中国腐蚀与防护学报, 2020, 40(6): 553-559.
[6]	ZHOU Yu, ZHANG Haibing, DU Min, MA Li. Effect of Cathodic Potentials on Hydrogen Embrittlement of 1000 MPa Grade High Strength Steel in Simulated Deep-sea Environment[J]. 中国腐蚀与防护学报, 2020, 40(5): 409-415.
[7]	LIU Haixia, HUANG Feng, YUAN Wei, HU Qian, LIU Jing. Corrosion Behavior of 690 MPa Grade High Strength Bainite Steel in a Simulated Rural Atmosphere[J]. 中国腐蚀与防护学报, 2020, 40(5): 416-424.
[8]	LI Congwei, DU Shuangming, ZENG Zhilin, LIU Eryong, WANG Feihu, MA Fuliang. Effect of Current Density on Microstructure, Wear and Corrosion Resistance of Electrodeposited Ni-Co-B Coating[J]. 中国腐蚀与防护学报, 2020, 40(5): 439-447.
[9]	WEN Yang, XIONG Lin, CHEN Wei, XUE Gang, SONG Wenxue. Chloride Penetration Resistance of Polyvinyl Alcohol Fiber Concrete under Dry and Wet Cycle in Chloride Salt Solutions[J]. 中国腐蚀与防护学报, 2020, 40(4): 381-388.
[10]	CAO Jingyi, FANG Zhigang, CHEN Jinhui, CHEN Zhixiong, YIN Wenchang, YANG Yange, ZHANG Wei. Preparation and Properties of Micro-arc Oxide Film with Single Dense Layer on Surface of 5083 Aluminum Alloy[J]. 中国腐蚀与防护学报, 2020, 40(3): 251-258.
[11]	ZHANG Yao, GUO Chen, LIU Yanhui, HAO Meijuan, CHENG Shiming, CHENG Weili. Electrochemical Corrosion Behavior of Extruded Dilute Mg-2Sn-1Al-1Zn Alloy in Simulated Body Fluid[J]. 中国腐蚀与防护学报, 2020, 40(2): 146-150.
[12]	HE Zhuang,WANG Xingping,LIU Zihan,SHENG Yaoquan,MI Mengxin,CHEN Lin,ZHANG Yan,LI Yuchun. Passivation and Pitting of 316L and HR-2 Stainless Steel in Hydrochloric Acid Liquid Membrane Environment[J]. 中国腐蚀与防护学报, 2020, 40(1): 17-24.
[13]	WANG Le,YI Danqing,LIU Huiqun,JIANG Long,FENG Chun. Effect of Ru on Corrosion Behavior of Ti-6Al-4V Alloy and Its Mechanism[J]. 中国腐蚀与防护学报, 2020, 40(1): 25-30.
[14]	SHI Chao,SHAO Yawei,XIONG Yi,LIU Guangming,YU Yuelong,YANG Zhiguang,XU Chuanqin. Influence of Silane Coupling Agent Modified Zinc Phosphate on Anticorrosion Property of Epoxy Coating[J]. 中国腐蚀与防护学报, 2020, 40(1): 38-44.
[15]	WU Dongcai,HAN Peide. Effects of Moderate Temperature Aging Treatment on Corrosion Resistance of SAF2304 DuplexStainless Steel[J]. 中国腐蚀与防护学报, 2020, 40(1): 51-56.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed