Please wait a minute...
中国腐蚀与防护学报  2000, Vol. 20 Issue (4): 237-242          
  研究报告 本期目录 | 过刊浏览 |
316L不锈钢在NaCl溶液微动过程中局部腐蚀作用研究
闫建中;吴荫顺;张琳
北京科技大学腐蚀与防护中心 腐蚀、磨蚀与表面技术开放研究实验室
THE EFFECT OF LOCALIZED CORROSION ON FRETTINGATTACK OF 316l STAINLESS STEEL IN 0.9%NaCl SOLUTION
Jianzhong Yan;;
北京科技大学腐蚀与防护中心 腐蚀、磨蚀与表面技术开放研究实验室
引用本文:

闫建中; 吴荫顺; 张琳 . 316L不锈钢在NaCl溶液微动过程中局部腐蚀作用研究[J]. 中国腐蚀与防护学报, 2000, 20(4): 237-242 .
, , . THE EFFECT OF LOCALIZED CORROSION ON FRETTINGATTACK OF 316l STAINLESS STEEL IN 0.9%NaCl SOLUTION[J]. J Chin Soc Corr Pro, 2000, 20(4): 237-242 .

全文: PDF(218 KB)  
摘要: 采用球-平面接触微动磨损设备,对轧制固溶316L不锈钢在0.9%NaCl溶液微动过程中局部腐蚀的作用进行了研究.结果表明微动是使不锈钢发生腐蚀的主导因素.开路状态下,316L不锈饮在微动过程中发生严重缝隙腐蚀,金属离子在微动区外发生氧化反应,生成碱性氢氧化物沉淀,加剧了微动区中心的贫氧特征,并改变了材料表面钝化膜与基体间的应力状态,使用权材料表面氧化膜发生局部损伤,成为主导微动损伤扩展的主要因素之一.在强阳极极化态下,微动区边缘磨屑诱发点蚀,促进了微动损伤区的扩展过程,才增大了不锈钢的微动失重.
关键词 : 微动,  缝隙腐蚀,  点蚀,  316L不锈钢,  0.9%NaCl溶    
Abstract:The effect of localized corrosion,such as crevice corrosion and potting on fretting attack of solution annealed 316L stainless steel in saline solution, has been studied with ball-plane contacted fretting test system.The results suggested that fretting induced remarkable corrosion,and the combination of fretting and crevice-like cindition made the material suffer severe corrosion damage.The oxidation of the fretting corrosion product resulted in alkaline deposit on the surface outside of the fretted center,which would play an important role in the fretting process.Debris could play some apparent role on the damage when fretting carried on under high anodic polarization condition.The concentration of debris on the edge of fretting area might accelerate the occurrence of pitting ,which made great contribution to the damage and the expansion of fretting scars.
Key words: fretting    crevice corrosion    pitting    316Lstainless steel    0.9%NaCl solution
收稿日期: 1999-08-16     
ZTFLH:  TG113.2  
[1] Waterhouse R B. Fretting Corrosion[M]. New York:Pergamon Press, 1972
[2] Waterhouse R B. Fretting Fatigue[M]. London:Appl. Sci. Publ. LTD, 1981
[3]李诗卓,董祥林.材料的冲蚀磨损与激动磨损[M].北京:机械工业出版社,1987
[4]李京紫.激动磨损与防护技术[M].西安:陕西科学技术出版社,1992
[5] Silva R, Barbosa M A, Rondet B, et al. Impedance and photoelectrochemical measurement on passive films formed on metallicbiomaterials[J]. Br. Corros. J., 1990, 25(2): 136
[6] Lewis G, Daigle K. Electrochemical behavior of Ti-6Al-4V alley in static biosimulating solutions[J]. J. of Applied Biomaterials, 1993,4:47
[7] Brown S A. Simpson J P. Biomed J. Crevice and fretting corrosion of stainless-less plate and screws[J]. J. Biomed. Mater. Res., 1981,(15):867
[8] Prabhat Kamar. Anthony J Hick, Asphahani A I, et al. Properties and characteristics of cast, wrought, and powder metallurgy(P/M)processed cobalt-chromium-molybdenum materials[A]. In: Fraker A C, Griffin C D, eds. Corrosion and Degradation of ImplantMaterials, ASTM STP859[C]. Philadelphia. 1985. 30
[9] Brown S A,Meritt K. Fretting Corrosion in saline and serum[J] .J. Biomed.Mater. Res., 1981, (15):479
[10] John P Sheehan,Charles R Morin, Kenneth F. Packer. Study of stress corrosion cracking susceptibility of type 316L stainless steel invitro[A]. In: Fraker A C, Griffin C D, eds. Corrosion and Degradation of Implant materials, ASIM SIP859[C], Philadelphia. 1985. 57
[11] Taira M, Lautenschlager E P. In vitro corrosion fatigue of 316L cold worked stainless steel[J] .J. Biomed. Mater. Res., 1992, (26):1171
[12] Mevellec C, Burleigh T D, Shanbhag A S. Corrsion in modular femoral hip prostheses: A study of 22 retrieved implants[A]. Southern,Biomedical Engineering Conference Proceedings IEEE[C], Piscataway, NJ, USA, 96TH8154, 1996. 3
[13] Musolino M C,Pettit F S,Burleigh TD, et al. Analysis of corrosion in sstainless steel total hip prostheses[A]. Southern BiomedicalEngineering Conference-Proceedings IEEE[C]. Piscataway, NJ, USA 96TH8154. 1996. 5
[14] Brown S A, Simpson J P. Grevice and freetig corrosion of stainless-steel plate and screws[J]. J. Biomed.Mater. Res., 1981, (15):867
[15] Suh, N P.The delamination theory of wear[J] .Wear. 1973, (25): 111
[16] Sproles E S, Gaul D J, Duquette D J., Fundamentals of Tribology[M]. Eds.Suh N P, Sake N, MIT. 1980.585
[17] Stowers I F, Rabinowica, E. Spherical particles formed in the fretting of silver[J] .J.Appl.Phys., 1972, (43):2485
[18] Hurricks P L.The occurrence of spherical particles in fretting wear[J]. Wear, 1974, (27):319
[1] 叶海锋, 沈书成, 陈江华. 增材制造316L不锈钢在不同温度海水环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1569-1578.
[2] 何章平, 袁誉坤, 杜颖哲, 林鹏, 徐健. 在模拟电加热器过热条件下316LN奥氏体钢缝隙腐蚀行为的研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1579-1587.
[3] 陆海峰, 缪强, 梁文萍, 姚志猛, 魏少翀, 陈国星. 激光清洗对不锈钢表面耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(4): 1227-1237.
[4] 陈旭, 刘宇航, 郭建, 王岐山, 刘畅, 刘彬. 超级13Cr不锈钢在饱和CO2 油田采出液中的缝隙腐蚀行为[J]. 中国腐蚀与防护学报, 2026, 46(2): 523-532.
[5] 谷清宇, 宋雁飞, 张亮亮, 王楠, 雷晓维. 激光定向能量沉积17-4PH不锈钢钝化与点蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 103-114.
[6] 张德平, 闫立震, 于洋, 杨广明, 代春宇, 孟乐, 徐博, 刘智勇. CO2 驱采油井复杂环境中N80油管断裂失效机理[J]. 中国腐蚀与防护学报, 2025, 45(6): 1698-1708.
[7] 李科, 李天雷, 曹晓燕, 姜流, 王雅熙, 肖泽渝, 钟显康. 316L不锈钢焊接接头在含S-H2S环境中的腐蚀行为[J]. 中国腐蚀与防护学报, 2025, 45(6): 1725-1733.
[8] 汤熠鑫, 张飞, 崔中雨, 崔洪芝, 李燚周. 氢对2205双相不锈钢在3.5%NaCl溶液中缝隙腐蚀行为影响[J]. 中国腐蚀与防护学报, 2025, 45(2): 431-437.
[9] 许志昱, 胡骞, 黄峰, 刘静, 卢献忠. 缝隙几何尺寸对闭塞区化学环境及腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2024, 44(6): 1581-1588.
[10] 洪孝木, 王永强, 李娜, 田凯, 杜娟. 时效处理对马氏体时效硬化不锈钢显微组织和局部腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2024, 44(5): 1285-1294.
[11] 杨成, 杨广明, 王建军, 苗学良, 张译, 孙宝壮, 刘智勇. 温度对核电站用42CrMoE低合金钢在硼酸模拟液中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2024, 44(5): 1345-1352.
[12] 乔泽, 李清泉, 刘晓航, 李燚周. 中性氯化钠溶液中硝酸根和电偶对7075-T651铝合金缝隙腐蚀行为影响研究[J]. 中国腐蚀与防护学报, 2024, 44(4): 1047-1054.
[13] 麻衡, 田会云, 刘宇茜, 王月香, 何康, 崔中雨, 崔洪芝. S420海工钢在不同海洋区带环境下的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2024, 44(3): 635-644.
[14] 邢少华, 彭文山, 钱峣, 李相波, 马力, 张大磊. 海水流速对经抛光和钝化表面处理的2205不锈钢点蚀的影响[J]. 中国腐蚀与防护学报, 2024, 44(3): 658-668.
[15] 张成龙, 张斌, 朱敏, 袁永锋, 郭绍义, 尹思敏. CoCrNi中熵合金在不同浓度NH4Cl溶液中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2024, 44(3): 725-734.