Please wait a minute...
中国腐蚀与防护学报  2012, Vol. 32 Issue (5): 423-427    
  研究报告 本期目录 | 过刊浏览 |
15-5PH不锈钢初期点蚀的电化学特性
周贤良1,2,聂轮2,华小珍2,刘智勇2,崔霞2,彭新元2
1. 南昌航空大学教育部无损检测重点实验室 南昌 330063
2. 南昌航空大学材料科学与工程学院 南昌 330063
ELECTROCHEMICAL PERFORMANCE OF INITIAL PITTING OF 15-5PH STAINLESS STEEL
ZHOU Xianliang1,2, NIE Lun2, HUA Xiaozhen2, LIU Zhiyong2, CUI Xia2, PENG Xinyuan2
1. Key Laboratory of Nondestructive Test, Ministry of Education, Nanchang Hangkong University, Nanchang 330063
2. School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063
全文: PDF(1330 KB)  
摘要: 

模拟研究15-5PH不锈钢在6% FeCl$_{3}$溶液中浸泡不同时间的初期点蚀规律,采用电化学阻抗测试和扫描Kelvin探针技术研究15-5PH不锈钢初期点蚀过程中的电化学行为。结果表明,随着浸泡时间增长,电化学反应电阻和阻抗模值逐渐减小,EIS谱由一个时间常数逐渐变成两个明显的时间常数。随着腐蚀的不断进行,不锈钢表面阴极区和阳极区不断发生变化,呈现局部腐蚀的特征,表面电位也逐渐升高,阴极区和阳极区变得明显,腐蚀反应处于加速过程。

关键词 15-5PH不锈钢点蚀电化学阻抗谱扫描Kelvin探针    
Abstract

The initial pitting behavior of 15-5PH stainless steel immersed in 6% FeCl$_{3}$ solution was investigated by electrochemical impedance spectroscopy (EIS) and scanning Kelvin probe (SKP). The results showed that the electrochemical impedance magnitude and the impedance module declined with the immersion time. One time constant appeared in EIS spectrum first then two time constant as the immersion continued. The SKP results indicated that the anodic and cathodic areas alternated constantly with distinct character of localized corrosion. When the corrosion process continued, the surface potential of 15-5PH stainless steel increased, while anodic and cathodic area distinguished evidently from each other.

Key words15-5PH stainless steel    pitting, EIS    SKP 15-5PH stainless steel|pitting, EIS|SKP
收稿日期: 2011-09-07     
ZTFLH:  TG174.2  
基金资助:

国家自然科学基金(50901041)、江西省自然科学基金(2009GZC5009)、江西省教育厅重点实验室基金(DB200901399)和江西省教育厅科技项目(GJJ11 524)资助

通讯作者: 周贤良     E-mail: nielun23@126.com
Corresponding author: zhou xianliang     E-mail: nielun23@126.com
作者简介: 周贤良,男,1957年生,教授,研究方向为钢铁高温氧化、大气腐蚀及金属基复合材料

引用本文:

周贤良,聂轮,华小珍,刘智勇,崔霞,彭新元. 15-5PH不锈钢初期点蚀的电化学特性[J]. 中国腐蚀与防护学报, 2012, 32(5): 423-427.
ZHOU Xianliang, NIE Lun, HUA Xiaozhen, LIU Zhiyong, CUI Xia, PENG Xinyuan. ELECTROCHEMICAL PERFORMANCE OF INITIAL PITTING OF 15-5PH STAINLESS STEEL. Journal of Chinese Society for Corrosion and protection, 2012, 32(5): 423-427.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2012/V32/I5/423

[1] Liu Z B, Liang J X, Yang Z Y, et al. Effect of carbon content on microstructure and mechanical properties of type 15-5PH precipitation hardened stainless steel[J]. J. Aeronaut. Mater., 2011, 31(1): 7-12

    (刘振宝,梁剑雄,杨志勇等. 碳含量对15-5PH沉淀硬化不锈钢板材的组织与性能的影响[J]. 航空材料学报,2011, 31(1): 7-12)

[2] Liu D X. Corrosion and Protection of Materials[M]. Xi'an: Northwest Industrial University Press, 2006: 119-120

    (刘道新. 材料的腐蚀与防护[M]. 西安: 西北工业大学出版社, 2006: 119-120)

[3] Dong C F, An Y H, Li X G, et al. Electrochemical performance of initial corrosion of 7A04 aluminum alloy in marine atmosphere[J]. Chin. J.  Nonferrous Met., 2009, 19(2): 346-352

    (董超芳, 安英辉, 李晓刚等. 7A04铝合金在海洋大气环境中初期腐蚀的电化学特性[J]. 中国有色金属学报, 2009, 19(2): 346-352)

[4] Zhu Q Z, Xue W B, Lu L, et al. Preparation of microarc oxidation coating on (Al2O3-SiO2)sf/AZ91D magnesium matrix composite and its electrochemical impedance spectroscopic analysis[J]. Acta Metall. Sin., 2011, 47(1): 74-80

    (朱庆振,薛文斌,鲁亮等. (Al2O3-SiO2) sf/AZ91D镁基复合材料微弧氧化膜的制备及电化学阻抗谱分析[J]. 金属学报, 2011, 47(1): 74-80)

[5] Wang J, Cao C N, Lin H C. Features of AC impedance of pitting corroded electrodes during pits propagation[J]. J. Chin. Soc. Corros. Prot., 1989, 9(4): 271-278

    (王佳, 曹楚南, 林海潮. 孔蚀发展期的电极阻抗频谱特征[J]. 中国腐蚀与防护学报, 1989, 9(4): 271-278)

[6] Cao C N. Principle of Corrosion Electrochemistry(2nd Ed.)[M]. Beijing: Chemical Industry Press, 2004: 287-305

    (曹楚南. 腐蚀电化学原理(第二版)[M]. 北京: 化学工业出版社, 2004: 287-305)

[7] Bajguirani H R H.The effect of aging upon the microstructure and mechanical properties of type 15-5PH stainless steel[J]. Mater. Sci. Eng., 2002, A338: 142-159

[8] Li Y C, Gao J, Li X G, et al. Research of electrochemical corrosion behavior under coatings with defects by scanning Kelvin probe[J]. J. Univ. Sci. Technol. Beijing, 2010, 32(9): 1169-1174

    (李迎超, 高瑾, 李晓刚等. 扫描Kelvin探针研究缺陷涂层的摸下腐蚀电化学行为[J]. 北京科技大学学报, 2010, 32(9): 1169-1174)

[1] 冉斗, 孟惠民, 刘星, 李全德, 巩秀芳, 倪荣, 姜英, 龚显龙, 戴君, 隆彬. pH对14Cr12Ni3WMoV不锈钢在含氯溶液中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2021, 41(1): 51-59.
[2] 张浩, 杜楠, 周文杰, 王帅星, 赵晴. 模拟海水溶液中Fe3+对不锈钢点蚀的影响[J]. 中国腐蚀与防护学报, 2020, 40(6): 517-522.
[3] 于浩冉, 张文丽, 崔中雨. 4种镁合金在Cl--NH4+-NO3-溶液体系中的腐蚀行为差异研究[J]. 中国腐蚀与防护学报, 2020, 40(6): 553-559.
[4] 戴明杰, 刘静, 黄峰, 胡骞, 李爽. 基于正交方法研究阴极保护电位波动下X100管线钢的点蚀行为[J]. 中国腐蚀与防护学报, 2020, 40(5): 425-431.
[5] 张欣, 杨光恒, 王泽华, 曹静, 邵佳, 周泽华. 冷拉拔变形过程中含稀土铝镁合金腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(5): 432-438.
[6] 贺三, 孙银娟, 张志浩, 成杰, 邱云鹏, 高超洋. 20#钢在含饱和CO2的离子液体醇胺溶液中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(4): 309-316.
[7] 李清, 张德平, 王薇, 吴伟, 卢琳, 艾池. L80油管钢实际腐蚀状况评估及室内电化学和应力腐蚀研究[J]. 中国腐蚀与防护学报, 2020, 40(4): 317-324.
[8] 郏义征, 王保杰, 赵明君, 许道奎. 固溶处理制度对挤压态Mg-Zn-Y-Nd镁合金在模拟体液中腐蚀和析氢行为的影响规律研究[J]. 中国腐蚀与防护学报, 2020, 40(4): 351-357.
[9] 胡露露, 赵旭阳, 刘盼, 吴芳芳, 张鉴清, 冷文华, 曹发和. 交流电场与液膜厚度对A6082-T6铝合金腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2020, 40(4): 342-350.
[10] 白苗苗, 白子恒, 蒋立, 张东玖, 姚琼, 魏丹, 董超芳, 肖葵. H62黄铜/TC4钛合金焊接件腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 159-166.
[11] 何壮,王兴平,刘子涵,盛耀权,米梦芯,陈琳,张岩,李宇春. 316L和HR-2不锈钢在盐酸液膜环境中的钝化与点蚀[J]. 中国腐蚀与防护学报, 2020, 40(1): 17-24.
[12] 苏小红,胡会娥,孔小东. W颗粒/Zr41.2Ti13.8Cu12.5Ni10Be22.5基非晶复合材料在3%NaCl溶液中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(1): 70-74.
[13] 王标,杜楠,张浩,王帅星,赵晴. 304不锈钢点蚀产物对亚稳态点蚀萌生和稳态蚀孔生长的加速作用[J]. 中国腐蚀与防护学报, 2019, 39(4): 338-344.
[14] 李雨,关蕾,王冠,张波,柯伟. 机械应力对不锈钢点蚀行为的影响[J]. 中国腐蚀与防护学报, 2019, 39(3): 215-226.
[15] 王霞,任帅飞,张代雄,蒋欢,古月. 豆粕提取物在盐酸中对Q235钢的缓蚀性能[J]. 中国腐蚀与防护学报, 2019, 39(3): 267-273.