|
|
|
| TMA对熔融盐中铝镀层结构及耐蚀性的影响 |
| 王小花1;杨占红1;李旺兴2;陈建华2;王升威1;李景威1 |
1. 中南大学化学化工学院 长沙 410083
2. 中国铝业郑州研究院 郑州 450041 |
|
| EFFECT OF TMA ON STRUCTURE AND CORROSION RESISTANCE OF ALUMINUM COATINGS FROM MOLTEN SALT |
| WANG Xiaohua1; YANG Zhanhong1; LI Wangxing2; CHEN Jianhua2;WANG Shengwei1; LI Jingwei1 |
1. College of Chemistry and Chemical Engineering; Central South University; Changsha 410083
2. Zhengzhou Research Institute; Aluminum Corporation of China Limited; Zhengzhou 450041 |
| [1] Richard T C, Wayne C, Michael B. Nucleation and morphology studies of aluminum deposited from an ambinettemperature chloroaluminate molten salt [J]. Electrochem. Soc., 1992, 139(10): 2720-2727.
[2] Li J F, Zhang Z, Zhang J Q, et al. Review of research on corrosion behavior of Al-Li alloys [J]. J. Chin.Soc. Corros. Prot., 2003, 23(5): 316-320
(李劲风, 张昭, 张鉴清等. 铝－锂合金腐蚀性能研究综述 [J]. 中国腐蚀与防护学报, 2003, 23(5): 316-320)
[3] Stafford C R. Electrochemistry of titanium in molten 2AlCl$_3$NaCl [J]. J. Electrochem. Soc., 1995, 142(10): 3288-3296
[4] Li Q F, Qiu Z X. Electrochemical deposition of aluminum from NaCl-AlCl$_3$ molten salt system [J]. Rare Met. Mater. Eng.,1995, 24(3): 59-63
(李庆峰, 邱竹贤. 铝在NaCl-AlCl$_3$熔盐体系中的电化学沉积 [J].稀有金属材料与工程, 1995, 24(3): 59-63)
[5] Li J C, Nan S H, Jiang Q.Study of the electrodeposition of Al-Mn amorphous alloys from molten salts [J]. Surf. Coat. Technol., 1998, 106(2-3): 135-139
[6] Feng Q Y, Ding Z M, Jia L S, et al. Low temperature electroplating aluminum in molten salt[J]. Mater. Prot., 2004, 37(4): 1-3
(冯秋元, 丁志敏, 贾利山等. 低温熔融盐电镀铝的研究 [J].材料保护, 2004, 37(4): 1-3)
[7] Wang J H, Xia Y, Wang M F. Preparation and properties of aluminum coating electroplated by inorganic molten salts [J]. Ordnance Mater. Sci. Eng., 2005, 29(6): 1-5
(王吉会, 夏扬, 王茂范. 无机熔盐镀铝层的制备与性能研究 [J].兵器材料科学与工程, 2005, 29(6): 1-5)
[8] Yang Z H, Wang X H, Li W X, et al. Electrodeposition of aluminum from AlCl$_3$-NaCl-KCl molten salt [J]. J. Cent. South Univ. (Nat. Sci. Ed.), 2008, 39(4): 672-676
(杨占红, 王小花, 李旺兴等.AlCl$_3$-NaCl-KCl熔融盐中铝的电沉积 [J]. 中南大学学报(自然科学版), 2008, 39(4): 672-676)
[9] Yang Y F, Gong Z Q, Yang Z H. Electrodeposition of bright minicrystal nickel-iron alloy foil [J]. J. Cent.South Univ. Technol., 2005, 36(6): 977-982
(杨余芳, 龚竹青, 阳征会. 光亮微晶态镍铁合金箔电沉积 [J]. 中南大学学报: 自然科学版, 2005, 36(6): 977-982)
[10] Huang S T. Solid X-ray Crystal Analysis [M]. Beijing:China Higher Education Press, 1985
(黄胜涛. 固体X射线学 [M]. 北京: 高等教育出版社, 1985)
[11] Janowski G W, Stafford C R, The microstructure of electrodeposited titanium-aluminium alloys [J] Metall.Trans. A, 1992, 23A, 2715-2723
[12] Fellner P, Chrenkova Paucirova M,Matiasovos K. Electrolytic aluminium plating in salt mixtures based on AlCl$_3$ I: Influence of the addition of tetramethylaramonium chloride [J]. Surf. Treat., 1981, 14(2): 101-108
[13] Li J H, Fei X M, Xu F. Effect of two organic additives on tin electrodeposition [J]. Chin. J. Appl. Chem., 2006, 23(9): 1042-1046
(李俊华, 费锡明, 徐芳. 2种有机添加剂对锡电沉积的影响 [J]. 应用化学, 2006, 23(9): 1042-1046) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
