|
|
Electrochemical Synthesis of Polythiophene Film and its Effect on Corrosion Resistance of Stainless Steel |
MA huan, DAI Yatang, LI Changxiong, ZHANGHuan, OU Qinghai, SHEN Zhen |
School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, China |
|
|
Abstract Abstract:The polythiophene (PTh) film on stainless steel sheet (SS) was synthesized by potentiostatic method in pure boron trifluoride diethyl etherate (BFEE) solution. The structure, morphology and thermostability of the PTh film were studied by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The corrosion performance of the polymer film was investigated in 3.5% (mass) NaCl solution, by using anodic polarization and electrochemical impedance spectroscopy (EIS). The results showed that the as-electro synthesized PTh film was uniform and shiny, had a good thermostability. Ecorr of the PTh coated SS shifted towards more positive side than bare SS about 220 mV and Jcorr decreased two orders of magnitude, indicating that the PTh film has excellent corrosion resistance.
|
|
Cite this article:
MA huan,DAI Yatang,LI Changxiong,ZHANGHuan,OU Qinghai,SHEN Zhen. Electrochemical Synthesis of Polythiophene Film and its Effect on Corrosion Resistance of Stainless Steel. Journal of Chinese Society for Corrosion and protection, 2013, 33(2): 148-152.
URL:
https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y2013/V33/I2/148
|
[1] Jin S, Xue G. Interaction between thiophene and solvated Lewis acids and the low-potential electrochemical deposition of a highly anisotropic conducting polythiophene film [J]. Macromolecules, 1997, 30: 5753-5757 [2] Zhou L, Jin S, Xue G. Electrosynthesis of poly(3-methylthiophene) films with high strength and stabile conductive properties [J]. Macromolecules. Chem. Phys., 1996, 197: 3309-3315 [3] Truong V T, Lai P K, Moore B T, et al. Corrosion protection of magnesium by electroactive polypyrrole/paint coatings [J]. Synth. Met. , 2000, 110: 7-15 [4] Xu G R, Yi Q F, Zhou G X, et al. Preparation and corrosion resistance of conductive polyaniline coating on aluminum by electropolymerization [J]. J. Chin. Soc. Corros. Prot., 2008, 1(28): 11-15 (徐国荣 易清风 周光喜等. 铝基体上电沉积聚苯胺膜及其耐蚀性[J]. 中国腐蚀与防护学报, 2008, 28(1): 11-15) [5] Zhang Z, Shi G. Electrochemical polymerization of 3-phenylthiophene [J]. Electroanal. Chem., 2004, 569: 197-202 [6] Geetha S, Trivedi D C. A new route to synthesize high degree polythiophene in a room temperature melt medium [J]. Synth. Met., 2005, 155: 232-239 [7] Kousik G, Pitchumani S, Renganathan N G. Electrochemical characterization of polythiophene-coated steel [J]. Prog. Org. Coat., 2001, 43: 286-291 [8] Li X, Li Y. Electropolymerization of thiophene in acetonitrile with boron trifluoride-ethyl ether as supporting electrolyte [J]. Synth. Met., 2003, 135/136: 215-216 [9] Li C, Chen F, Shi G, et al. Electrosynthesis of free-standing poly (para-phenylene) films in mixed electrolytes of boron trifluoride diethyl etherate and trifluoroacetic acid on stainless steel electrode [J]. Appl. Surf. Sci., 2002, 83: 2462-2466 [10] Aeiyach S, Kone A, Dieng M, et al. Electrosynthesis of polythiophene and poly(3-methylthiopene) films by oxidation of thiophene and 3-methylthiophene on an Iron Surface [J]. J. Chem. Soc. Chem. Commun., 1991, 12: 822-824 [11] Wang H M, Tang G Q, Jin S S, et al. Effect of the preparation condition on the structure and conductive properties of polythiophene [J]. Acta Chim. Sin., 2007, 65(21): 2454-2458 (王红敏, 唐国强, 晋圣松等. 聚噻吩制备条件对其结构和导电性能的影响 [J]. 化学学报, 2007, 65(21): 2454-2458) [12] Sari B, Talu M, Yildirim F, et al. Synthesis and characterization of polyurethane/polythiophene conducting copolymer by electrochemical method [J]. Appl. Surf. Sci., 2003, 205: 27-38 [13] Pekmez N ?, Abacl E, Cinkilli k, et al. Polybithiophene and its bilayers with polyaniline coatings on stainless steel by electropolymerization in aqueous medium[J]. Prog. Org. Coat., 2009, 65: 462-268 [14] Xu J K, Hou J, Zhang S S, et al. Electrosyntheses of high quality poly(5-methylindole) films in mixed electrolytes of boron trifluoride diethyl etherate and diethyl ether[J]. Eur. Polym. J., 2006, 42: 1384-1395 [15] Huang H, Shao Y W, Zhang T, et al. Effect of emeraldne base (EB) from of polyaniline on corrosion behavior of carbon steel In 3.5% NaCl solution [J]. Corros. Sci. Prot. Technol., 2009, 21(2): 221-223 (黄辉, 邵亚薇, 张涛等. 本征态聚苯胺对碳钢在3.5% NaCl溶液中的腐蚀行为影响 [J]. 腐蚀科学与防护技术, 2009, 21(2): 221-223) [16] Ma L, HE L, GAN M Y, et al. Synthesis and electrochromic properties of polyaniline electrode film doped with multiple acid [J]. J. Funct. Mater., 2009, 1(40): 30-32 (马利, 贺玲, 甘孟瑜等. 复合酸掺杂聚苯胺电极膜的制备及其电化学性能的研究 [J]. 功能材料, 2009, 1(40): 30-32) [17] Amirudin A, Thieny D. Application of electrochemical impedance spectroscopy to study the degradation of polymer coated metals [J]. Prog. Org. Coat., 1995, 26: 1-18 [18] Shokry H. Corrosion protection of mild steel electrode by electrochemical polymerization of acrylamide [J]. Chem. Met. Alloys., 2009, 2: 202-210
|
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|