[1] An B G, Zhang X Y, Han E H, et al. Research situation of atmospheric corrosion of aluminum and aluminum alloys[J]. Chin. J.Nonferrous. Met., 2001, 11 (S2): 11-15
    (安百刚, 张学元, 韩恩厚等. 铝和铝合金的大气腐蚀研究现状[J]. 中国有色金属学报, 2001, 11 (S2): 11-15)
[2] Ma T, Wang Z Y, Han W, et al. A review of atmospheric corrosion of aluminum and aluminum alloys [J]. Corros. Sci. Prot.Technol., 2004, 16 (3): 155-161
    (马腾, 王振尧, 韩薇等. 铝和铝合金的大气腐蚀[J]. 腐蚀科学与防护技术, 2004, 16 (3): 155-161)
[3] Zhang Q C, Wu J S, Zheng W L, et al. The electrochemical characteristic of rust layer formed on the weathering steel in cyclic dry/wet laboratory test[J]. Mater. Mech. Eng., 2002, 26 (8):22-24
    (张全成, 吴建生, 郑文龙等. 周浸加速循环腐蚀实验中耐候钢锈层的电化学特征[J]. 机械工程材料, 2002, 26 (8): 22-24)
[4] Liu L H, Li M, Li X G, et al. An apparatus for cyclic dry/wet accelerated laboratory test simulating outdoor atmospheric corrosion[J]. Total Corros. Control, 2006, 20 (6):4-6
    (刘丽宏, 李明, 李晓刚. 干湿交替周浸模拟加速实验装置的建立[J].全面腐蚀控制, 2006, 20 (6): 4-6)
[5] Xu M D, Liu Y. Standard manual for metal corrosion and protection[S]. Beijing: China Environmental Science Press, 1996
    (徐明德, 刘颖. 金属腐蚀与防护标准手册[S]. 北京: 中国环境科学出版社, 1996)
[6] Wang G Y, Wang H J, Li X L, et al. Natural environmental corrosion and protection-atmosphere, seawater and soil[M]. Beijing:Chemical Industry Press, 1997
    (王光雍, 王海江, 李兴濂等. 自然环境的腐蚀与防护-大气、海水、土壤[M]. 北京: 化学 工业出版社, 1997)
[7] Zhang Q, Cheng J W. Study on the accelerated corrosion tests of high-strength aluminum alloys[J]. Acta Aeronaut. Astronaut. Sin.,2000, 21 (Suppl.): 39-42
    (张琦, 程基伟. 高强铝合金加速腐蚀方法的研究[J]. 航空学报, 2000, 21 (Suppl.): 39-42)
[8] Ding X Y. Study on the mechanism of intergranular corrosion of Al-Li alloy[D]. Beijng: Beihang University, 1995
    (丁学谊. Al-Li合金的晶间腐蚀机理研究[D]. 北京: 北京航空航天大学, 1995)
[9] Cao C N. Natural Environmental Corrosion of Chinese Materials[M]. Beijing: Chemical Industry Press, 2005
    (曹楚南编. 中国材料的自然环境腐蚀[M]. 北京: 化学工业出版社, 2005)
[10] Schueller G R T, Taylor S R. Electrochemical impedance analysis and interpretation[R]. U. S.: ASTM STP 1188, 1993
[11] Su J X, Zhang Z, Cao F H, et al. Exfoliation corrosion behavior of T6 treated 2090 Al-Li alloy in EXCO solution and EIS during exfoliation corrosion evolution[J]. Acta Metall. Sin., 2005, 41 (9): 974-978
     (苏景新, 张昭, 曹发和等. T6态2090 Al-Li合金在EXCO溶液中的剥蚀行为和剥蚀发展过程中的电化学阻抗谱[J]. 金属学报, 2005, 41 (9): 974-978)
[12] Conde A, de Damborenear J. Electrochemical modelling of exfoliation corrosion behaviour of 8090 alloy[J]. Electro chim. Acta, 1998, 43(8): 849-860
[13] Keddam M, Kuntz C, Takenouti H, et al. Exfoliation corrosion of aluminum alloys examined by electrode impedance[J]. Electrochim.Acta, 1997, 42 (1): 87-97.
[14] Cao F H, Zhang Z, Li J F, et al.Corrosion behavior of two heat treatment Al-Zn-Mg-Cu alloys in different intergranular corrosion solution[J]. Trans. Nonferrous. Met.Soc. Chin., 2004, 14 (3): 619-625
[15] Cheng Y L, Zhang Z, Cao F H,et al. A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers[J]. Corros. Sci., 2004, (46): 1649-1667
[16] Li J F, Zheng Z J, Zhang Z, et al. Electrochemical impedance spectroscopy of Al alloys during exfoliation corrosion[J]. J. Chin. Soc. Corros. Prot.,2005, 25 (1): 48-52
     (李劲风, 郑子樵, 张昭等. 铝合金剥蚀过程的电化学阻抗谱分析[J]. 中国腐蚀与防护学报, 2005, 25(1): 48-52)