|
|
|
Abstract performance evaluation techniques of coating and film on stainless steel are reviewed. The film and coating on stainless steel covered in this paper are colored film prepared by either by electrochemically or chem?鄄ically， passive film after polishing and cleaning， thermal barrier and ceramic coating and so on. Detail discus?鄄sion of each technique is focused on the suitability， reliability and performance indicator（s） an evaluation pro?鄄cess could generate. Additional performance indicator if available and not mentioned in previous researches is al?鄄so suggested by authors with an intension to extend the existed technique and generate more performance infor?鄄mation. At the end of each category， the applicable ISO， ASTM， DIN and GB standards are discussed and com?鄄pared for encouragement of the possible adoption of standards.
|
|
Received: 06 July 2006
|
[1]Guo Z H,Jia F L,Qiu Y B.Study of coloring of stainless steel bytriangular current scan method[J].Electroplat.Pollut.Control,2000,20(4):21-23(郭稚弧,贾法龙,邱于兵.三角波电流扫描法制备彩色不锈钢的研究[J].电镀与环保,2000,20(4):21-23)
[2]Zhang J X,Wei Z F,Qiao Y N,et al.A new process for stainlesssteel coloring[J].Corros.Prot.,2004,25(1):13-16(张俊喜,魏增福,乔亦男等.不锈钢着色的绿色工艺研究[J].腐蚀与防护,2004,25(1):13-16)
[3]Jia F L,Guo Z H,Li Z M.Coloration of stainless steel by square-wave current of low frequency[J].Corros.Prot.,2001,22(3):105-108(贾法龙,郭稚弧,李卓民.低频方波电流进行不锈钢电解着色的研究[J].腐蚀与防护,2001,22(3):105-108)
[4]Song G L,Cao C N,Lin H C.Effects of alternating voltage mod-ulating passivation and posttreatment on the passive film of stain-less steel[J].J.Appl.Chem.,1992,9(1):79-81(宋光铃,曹楚南,林海潮.载波钝化和钼酸盐后处理对不锈钢钝化膜性能的影响[J].应用化学,1992,9(1):79-81)
[5]Du T B,Yu J K.Study on stability of passive film on stainless steelby alternating voltage passivation[J].Mater.Prot.,1997,30(4):1(杜天宝,俞家康.载波不锈钢钝化膜稳定性的研究[J].材料保护,1997,30(4):1)
[6]Wang X H,Ma J B,Li Z Q.Development and application of col-ored stainless steel[J].Stainless Steel,2005,(11):22-25(王喜洪,马金保,李志清.彩色不锈钢的开发应用[J].不锈钢,2005,(11):22-25)
[7]Guo Z H,Wang H R,Jia F L.New technique of stainless steelcoloring[J].Mater.Prot.,2000,33(5):32-35(郭稚弧,王海人,贾法龙.不锈钢着色新技术的研究[J].材料保护,2000,33(5):32-35)
[8]Conrrado R,Bocchi N.Corrosion resistance of colored films grownon stainless steel by the alternating potential pulse method[J].Electrochim.Acta,2003,48:2417-2424
[9]Zhou Y Y,Wu J M.Stainless steel coloring at constant potential[J].Mater.Prot.,1997,30(1):38(周一扬,吴继民.不锈钢恒电位方波充电法着色[J].材料保护,1997,30(1):38)
[10]Chen W,Chen R Y.Study on black coloring of aluminum alloysurface[J].Plat.Finish.,2002,22(6):5-7(程蔚,陈日耀.铝合金表面着亮黑色的研究[J].电镀与精饰,2002,22(6):5-7)
[11]Li Q,Chen Y.Corrosion resistance of metals coated with ceramicfilms[J].Dev.App.Mater.,1999,14(6):47-50(李青,陈艳.金属陶瓷涂层耐蚀性能研究[J].材料开发与应用,1999,14(6):47-50)
[12]Liang C H,Shao X R.Electrolytic coloring technology of stainlesssteel and its electrochemical behavior[J].Plat.Finish.,2000,22(1):5-8(梁成浩,邵新荣.不锈钢电解着色工艺及电化学性能[J].电镀与精饰,2000,22(1):5-8)
[13]Jia F L,Guo Z H.Study on the film of electrochemically coloredstainless steel[J].Electroplat.Pollut.Control,2001,21(3):22-25(贾法龙,郭稚弧.不锈钢电化学着色膜的研究[J].电镀与环保,2001,21(3):22-25)
[14]Sun Q,Gu X Q.Study on anticorrosion performance of stainlesssteel[J].Mater.Prot.,1983,(3):3(孙奇,顾小青.彩色不锈钢耐蚀性能研究[J].材料保护,1983,(3):3)
[15]Wu H.Influences on coloring of stainless steel[J].Electroplat.Finish.,2004,23(1):54-55(吴昊.影响不锈钢着色的因素[J].电镀与涂饰,2004,23(1):54-55)
[16]Li Y Y,Zhang W X.Study on golden coloring on stainless steel[J].Mater.Prot.,1999,32(9):12-14(李瑜煜,张文雄.不锈钢阳极氧化着金黄色技术的研究[J].材料保护,1999,32(9):12-14)
[17]Ouyang G,Zhuo D J,Yang Q F.Coloring technique of platestainless steel[J].Mater.Prot.,2003,36(1):44-45(欧阳贵,左丹江,羊秋福.平板不锈钢着色工艺[J].材料保护,2003,36(1):44-45)
[18]Jin G,Zhang X P,Bi J Z.A study on stainless steel coloring tech-nology[J].Plat.Finish.,2004,26(6):23-26(金光,张学萍,毕监智.不锈钢着色工艺研究[J].电镀与精饰,2004,26(6):23-26)
[19]Li G B,Jiang Y F,Gu C L.A Study on stainless steel chemicalcoloring technology[J].Surf.Technol.,1996,25(5):26-28(李国彬,姜延飞,谷春瑞.不锈钢化学着色工艺研究[J].表面技术,1996,25(5):26-28)
[20]Mei S Y,Zhou Y K.Wear-resistance of color film on stainlesssteel[J].Mater.Prot.,2000,33(11):10(梅世云,周元康.不锈钢着色膜的耐磨性[J].材料保护,2000,33(11):10)
[21]Yang X Y,Gong Z Q,Chen B Z.Surface chemical coloring ofstainless steel for cooking utensil[J].Surf.Technol.,2005,34(2):53-55(杨喜云,龚竹青,陈白珍.厨具不锈钢的表面化学着色[J].表面技术,2005,34(2):53-55)
[22]Wang B.Study on wear-resistance of Al alloyed with rare metal[J].Rare Metals and Cemented Carbides,1991,3(104):21-23(王冰.稀土铝着色膜耐磨性的研究[J].稀有金属与硬质合金,1991,3(104):21-23)
[23]Wang C T.Technology research on imitating stainless steel color-ing on Al and its alloys for construction[J].J.Zhejiang Ocean U-niv.(Natural Science Edition),2001,20(2):147-150(王春涛.建筑铝材仿不锈钢着色工艺研究[J].浙江海洋学院学报,2001,20(2):147-150)
[24]Chen Y Z,Yang C M,Zhu L Q.Study on corrosion resistance ofthe A3 steel treated by a water borne silicone emulsion[J].Surf.Technol.,2006,35(1):17-20(陈贻炽,杨春梅,朱立群.聚硅氧烷水基乳液处理的A3钢的耐蚀性研究[J].表面技术,2006,35(1):17-20)
[25]Ma S L,Jian X T.Effects of electrochemistry polishing on textureand performance of 1Crl8Ni9Ti[J].Mater.Prot.,1998,31(8):26-29(马胜利,井晓天.电化学抛光对1Crl8Ni9Ti组织和性能的影响[J].材料保护,1998,31(8):26-29)
[26]Li N.Process control of the erode-proof performance of stainlesssteel vessel[J].Safe Technol.Pressure Container,2002,5:40-41(李宁.谈不锈钢压力容器的酸洗钝化[J].锅炉压力容器安全技术,2002,5:40-41)
[27]Liu C J,Shang W.Study on the chemical coloring of anodic oxi-dation film of Al and its alloy on different color condition[J].Surf.Technol.,2004,33(3):53-55(刘长久,尚伟.铝材化学法不同着色效果条件的研究.表面技术,2004,33(3):53-55)
[28]Wang M Q.Clean of stainless steel black skin at room tempera-ture[J].Surf.Technol.,l995,24(4):38-40(王茂全.不锈钢黑色氧化皮常温清洗[J].表面技术,l995,24(4):38-40)
[29]Cao J Q,Liu B G,Zhou Y.Electrochemistry polishing of weldedstainless steel[J].Mater.Prot.,2003,36(6):25-26(曹经倩,刘炳根,周雅.焊接不锈钢的电化学抛光[J].材料保护,2003,36(6):25-26)
[30]Fang J L,Liu Q.A study on blue MoO42-converting film on stain-less steel[J].Mater.Prot.,1995,28(5):3-5(方景礼,刘琴.不锈钢上蓝色钼酸盐转化膜的研究[J].材料保,1995,28(5):3-5)
[31]Zhang J X,Chen J,Qiao Y N.Colored passive file on 304 stain-less steel[J].J.Chin.Soc.Corros.Prot.,1998,18(4):311-315(张俊喜,陈健,乔亦男等.载波钝化电场条件不锈钢着色膜的影响[J].中国腐蚀与防护学报,1998,18(4):311-315)
[32]Vasconcelos K O,Bocchi N,Rocha-Filho R C,et al.An environ-mentally friendly and practical method for obtaining color onstainless steel by interference[J].J.Electrochem.Soc.,2005,152(11):B491-B494
[33]Qian S Q,Zhou Y F.Green zone of stainless steel coloring[J].Mater.Prot.,1991,24(11):9(钱家权,周玉幅.不锈钢着色存在绿色区[J].材料保护,1991,24(11):9)
[34]Neal W E J,Misa A H.The measurement of anodized layer thick-ness on 304 colored stainless steel[J].J.Surf.Technol.,1982,15(8):395
[35]Zhen N Z,Zhen D L.Processing investigation on black coloringof aluminum alloy No.1235 by two-step electrolytic method[J].J.Fujian Univ.Technol.,2004,2(4):402-405(郑乃贞,郑旦亮.1235铝合金二步电解法着黑色工艺研究[J].福建工程学院学报,2004,2(4):402-405)
[36]Zhang J X,Zhou G D.Study on the properties of colored filmformed on stainless steel by alternating voltage passivation[J].Mater.Prot.,2002,35(1):8-10(张俊喜,周国定.不锈钢载波钝化着色膜性质的研究[J].材料保护,2002,35(1):8-10) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
