|
|
Evaluation of Sealing Methods on Corrosion Behavior of LD7 Aluminum Alloy Anodic Oxide Films in NaCl Solution |
Lianpeng Tian;Yu Zuo;Jingmao Zhao;Jingping Xiong;Xiaofeng Zhang;Xvhui Zhao |
北京化工大学 材料科学与工程学院 |
|
|
Abstract Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were used to study the influences of sealing methods on the corrosion behavior of anodic oxide film on LD7 aluminum alloy in NaCl solution. The anodic oxide films were sealed by the methods of boiling water, nickel fluoride, potassium dichromate and nickel acetate, respectively. The surface morphology was examined by scanning electron microscopy (SEM). The results show that nickel acetate sealed film provides relatively higher corrosion resistance both in acidic and in basic solutions, while boiling water and nickel fluoride sealed films is better in neutral solution. Potassium dichromate sealing method, which is very popular in the industry, could not provide good sealing quality for anodic oxide film on LD7 aluminum alloy in acidic, neutral and basic NaCl solutions.
|
Received: 21 June 2004
|
|
Corresponding Authors:
Lianpeng Tian
E-mail: lianptian@hotmail.com
|
Cite this article:
Lianpeng Tian; Yu Zuo; Jingmao Zhao; Jingping Xiong; Xiaofeng Zhang; Xvhui Zhao. Evaluation of Sealing Methods on Corrosion Behavior of LD7 Aluminum Alloy Anodic Oxide Films in NaCl Solution. J Chin Soc Corr Pro, 2005, 25(6): 327-331 .
URL:
https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y2005/V25/I6/327
|
[1]Vermilyea D A.Anodic films advances[J].Electrochem.Eng.,1963,3:211-217 [2]Patermarakis G,Papadreadis N.Effect of the structure of porous an-odic Al2O3films on the mechanism of their hydrothermal treatment[J].Electrochemica Acta,1993,38(10):1413-1420 [3]Thompson G E.Porous anodic alumina:abrication,characterizationand applications[J].Thin Solid Films,1997,297:192-201 [4]Skeldon P,Habazaki H,Thompson G E,et al.Formation of amor-phous anodic oxide films of controlled composition on aluminium al-loys[J].Thin Solid Films,1997,300:131-137 [5]Suay J J,Gimenez E.Characterization of anodized and sealed alu-minium by EIS[J].Corros.Sci.,2003.45:611-624 [6]Hao L,Cheng B R.Sealing processes of anodic coatings-past,pre-sent and future[J].Metal Finish,2000,12(8):8-18 [7]Zhao X H,Zuo Y,Zhao J M.Electrochemical properties of anodizedaluminum films in sodium chloride solution[J].Chin.J.Nonferr.Metal.,2004,14(4):562-567(赵旭辉,左禹,赵景茂.铝阳极氧化膜在NaCl溶液中的电化学性能[J].中国有色金属学报,2004,14(4):562-567) [8]Zuo Y,Zhao P H,Zhao J M.The influences of sealing methods oncorrosion behavior of anodized aluminum alloys in NaCl solution[J].Surf.Coat.Technol.,2003,166:237-242 [9]Hitzig J,Juttner K,Lorenz W J,et al.AC-impedance measure-ments on porous aluminium oxide films[J].Corros.Sci.,1984,24(11/12):945-952 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|