Please wait a minute...
中国腐蚀与防护学报  2007, Vol. 27 Issue (2): 70-         
  研究报告 本期目录 | 过刊浏览 |
应用原子力显微镜研究硫酸盐还原菌对A3钢的腐蚀
林晶;阎永贵;陈光章;马力;钱建华
腐蚀与防护国防科技重点实验室
APPLICATION OF ATOMIC FORCE MICROSCOPY IN STUDY OF SULFATE-REDUCING BACTERIA TO A3 STEEL
;;;;
腐蚀与防护国防科技重点实验室
引用本文:

林晶; 阎永贵; 陈光章; 马力; 钱建华 . 应用原子力显微镜研究硫酸盐还原菌对A3钢的腐蚀[J]. 中国腐蚀与防护学报, 2007, 27(2): 70-.

全文: PDF(1967 KB)  
摘要: 应用原子力显微镜(AFM)研究硫酸盐还原菌(SRB)、微生物膜、腐蚀产物膜和A3钢腐蚀后的表面形貌,获得了高分辨率、清晰的图像.测得了SRB的大小,微生物膜、腐蚀产物膜的厚度和形成的点蚀孔深度.结果表明,A3钢的微生物腐蚀过程是先形成致密的硫化物膜,然后微生物在其上面聚集附着形成微生物膜;A3钢的微生物腐蚀主要以点蚀形式发生.
关键词 : 原子力显微镜,  磷酸盐还原菌,  微生物膜,  腐蚀    
Abstract:The morphology of sulfate- reducing bacteria (SRB),microbial biofilms,corrosion product film and corroded A3 steel have been observed by atomic force microscopy (AFM).The results of high-resolution topographical images gave the information of the size of the cell, the thickness of biofilms and corrosion product film and the pitting corrosion depth. It can be concluded that compact sulphide films were formed on the surface of A3 steel and then microbiologically attached and formed biofilms during the process of microbiologically influenced corrosion.The corrosion of A3 steel mainly presents pitting corrosion character.
Key words: atomic force microscopy    sulfate- reducing bacteria    biofilms    corrosion product film    A3 steel
收稿日期: 2005-10-26     
ZTFLH:  TG172.82  
[1]Binning G,Quate C,Gerber C.Atomic force microscopy[J].Phys.Rev.Lett.,1986,56:930-935
[2]Hadley R F.Microbiological anaerobic corrosion of steel pipeline[J].Oil and Gas,1939,38(19):92-96
[3]Minchin LJ.Anaerobic corrosion[J].Coke and Gas,1956,18(12):495-504
[4]Butlin K R,Vemon W H,Whiskin L.Investigation on undergroundcorrosion[J].Water.Sanit.Eng.,1952,2:468-472
[5]Kulman F F.Microbiological corrosion of buried steel pipe[J].Cor-rosion,1953,9(1):11-18
[6]Iverson W P.Research on the mechanisms of anaerobic corrosion[J].Int.Biodeterior.Biodegrad.,2001,47(2):63-70
[7]Puekorius.Recommended Practice for Biological Analysis of WaterFlood Injestion Waters.API RP-38,1959
[8]Hou B R.Corrosion Theory and Application in Marine Environment[M].Beijing:Science Publishing House,1998,6(侯保荣.海洋腐蚀环境理论及其应用[M].北京:科学出版社,1998,6)
[9]Li X B,Wang J,Wang W.The electrochemical method of biofilmmo-nitoring in seawater[J].J.Chin.Soc.Corros.Prot.,2005,25(2):84-87(李相波,王佳,王伟.海洋环境微生物附着的电化学检测技术[J].中国腐蚀与防护学报,1992,25(2):84-87)
[10]Caldwell D E,Korber D R,Lawrence J R.Imaging of bacterial cellsby fluorescence exclusion using scanning confocal laser microscopy[J].Microb.Methods,1992,2:249-261
[11]Videla H A.Corrosion products and biofilm interactions in the in-fluenced corrosion of steel[J].Corrosion,2002,2557:1-10.
[12]Zhu X R,Wang X R.Corrosion and Protection of Metals in MarineEnvironment[M].Beijing:Defence Industry Press,1993(朱相荣,王相润.金属材料的海洋腐蚀与防护[M].北京:国防工业出版社,1993)
[13]Li C X,Kwong Yu Chan.Application of atomic force microscopy inthe study of microbiologically influenced corrosion[J].Mater.Char-act,2002,48:195-203
[14]Fang Herbert HP,Kwong Yu Chan,Li C X.Quantification of bac-terial adhesion forces using atomic force microscopy[J].J.Microbi-ol.Methods,2000,40:89-97
[15]Hctor A Videla.Comparative study of the corrosion product filmsformed in biotic and abiotic media[J].Corrosion,99,163:1-12
[1] 黎敏, 魏高飞, 邓书端, 李向红. 扫描电化学显微镜(SECM)在缓蚀剂研究中的进展与展望[J]. 中国腐蚀与防护学报, 2026, 46(5): 1326-1342.
[2] 谢敬礼, 王友志, 乔书振, 牛佳雨, 郝龙, 曹胜飞, 王俭秋. 高放废物地质处置库近场环境中碳钢腐蚀产物演化研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1343-1352.
[3] 周书宇, 刘昌璞, 杨留洋, 耿杰, 范海明, 张大磊, 鞠虹. 在超临界CO2 工况和典型环境因素共影响下的管线钢腐蚀及防护技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1353-1368.
[4] 黄绘, 李树丽, 邓书端, 李向红. 自修复材料在防护涂层中的研究进展及展望[J]. 中国腐蚀与防护学报, 2026, 46(5): 1369-1388.
[5] 曾崎, 虞文军, 门向南, 冯保净, 杨耀, 朱凯, 葛玉麟, 应韬, 曾小勤. 高强耐蚀稀土镁合金研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1415-1424.
[6] 张强, 卢壹梁, 金焱, 陈云, 杨丙坤, 王晓芳, 韩钰. 环境腐蚀性分级及大气/土壤腐蚀性地图绘制技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1425-1436.
[7] 许佳程, 刘家兵, 黄诗雨, 金灵好, 谭伟, 郭娜, 刘涛. 人工极地海域环境致EH40船板钢的力学性能损伤与应力腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1437-1451.
[8] 郑凯, 王艺陶, 王东胜, 刘伟, 蒋颖畅, 黄嵘, 常雪婷. 腐蚀-应力耦合作用对极地船用螺旋桨低碳马氏体不锈钢失效机理影响研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1452-1462.
[9] 齐晓涵, 翟海民, 李文生, 洪昊, 曹元, 俞雷, 陈博瀚. Al2O3 磨加量对铝合金搪瓷涂层组织结构及腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1497-1507.
[10] 贾梦瑶, 张伟强, 王媛, 谭季波, 邱建科, 郝延天, 吴欣强. 在3.5%NaCl溶液中压力变化对Ti80合金应力腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1508-1516.
[11] 李晓峰, 李艳茹, 卢云飞, 张泰华, 常雪婷, 安燕. 力学与防腐性能协同增强的聚吡咯改性芳纶纤维/环氧复合涂料[J]. 中国腐蚀与防护学报, 2026, 46(5): 1517-1526.
[12] 曹天慧, 杨砚淇, 刘雨薇, 吴磊, 郭泉忠, 贾志刚, 曹公望, 汪川. 23MnNiMoCr54钢在不同pH的模拟高矿化水中腐蚀机理研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1537-1548.
[13] 赵先锐, 戴中国, 李战江, 徐育烺, 张会霞, 李旺. 添加Y、Hf对AlCoCrFeNi高熵合金涂层在NaCl溶液中的腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1549-1559.
[14] 王兴斌, 李家民, 伍登骏, 唐伟能, 杨静, 郭嘉成, 杨欣宇, 侯娟. Al含量对Mg-xAl-Zn合金耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1560-1568.
[15] 叶海锋, 沈书成, 陈江华. 增材制造316L不锈钢在不同温度海水环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1569-1578.