Please wait a minute...
中国腐蚀与防护学报  2008, Vol. 28 Issue (1): 48-52          
  失效分析 本期目录 | 过刊浏览 |
高强度铝合金构件腐蚀疲劳失效分析
张正贵
沈阳大学机械工程学院材料科学系
Corrosion Fatigue Fracture Failure Analysis of High-strength Aluminum Alloy
ZHANG Zheng-gui
沈阳大学机械工程学院材料科学系
引用本文:

张正贵 . 高强度铝合金构件腐蚀疲劳失效分析[J]. 中国腐蚀与防护学报, 2008, 28(1): 48-52 .
. Corrosion Fatigue Fracture Failure Analysis of High-strength Aluminum Alloy[J]. J Chin Soc Corr Pro, 2008, 28(1): 48-52 .

全文: PDF(1145 KB)  
摘要: 在应力作用下对带有涂层的高强度铝合金构件在3.5% NaCl溶液中腐蚀疲劳断口进行了研究。结果表明:在腐蚀条件下高强度铝合金构件断口上不仅出现疲劳辉纹,还出现准解理、解理、沿晶等断裂特征,腐蚀疲劳过程属于阳极溶解机制控制。失效形式为多裂纹断裂,在各个铆孔处均有裂纹萌生,其中有一处为主裂纹,其位置不固定,主裂纹扩展距离较长,最后与其它裂纹汇合,最终导致疲劳断裂。
关键词 : 铝合金,  构件,  腐蚀疲劳,  失效    
Abstract:The fractography of high strength aluminum alloy LY12CZ riveted specimen with coating was investi?鄄gated after corrosion fatigue tests under stress in 3.5% NaCl solution. Fracture features like fatigue striation, dimple, cleavage, and intergranular fracture were observed. The corrosion fatigue mechanism was controlled by anodic dissolution. The failure mode was multi-crack fracture. Cracks were initiated from every rivet holes. The principal crack with longer propagation length and varying positions finally converged with other cracks and led to fatigue fracture.
Key words:
收稿日期: 2006-05-16     
[1]Parkings R N.Gangloff R P,Ives M B,ed.Environment-Induced Cracking of Metals[M].Houston,Tx:NACE,1990,1
[2]Zhang B,Zhang Z G,Han E H,Ke W,et al.Study of corrosion fatigue for LY12CZ aluminum alloy riveted lap-splice joints[J].Acta Metal.Sin.,2000,36(8):842-846(张波,张正贵,韩恩厚,柯伟等.LY12CZ铝合金铆接联接件在3.5%NaCl溶液中的腐蚀疲劳失效行为研究[J].金属学报,2000,36(8):842-846)
[3]Segerfrojd G,Blom A F.Fatigue behavior of mechanical joints:A state of the art overview[A].Proceedings of the Seventh International Fatigue Congress[C].Beijing,1999,1:41
[4]Newman J C,Jr,Harris C E,Piascik R S,Dawicke D S.Methodology for predicting the onset of widespread fatiguedamagein lap-splice joints and structure[A].Proceedings of the Seventh International Fatigue Congress[C].Beijing,1999,1:81
[5]Zhang B.The corrosion fatigue study on LY12CZ aluminum alloy and its rivet joint in sodium chloride solution[D].Shengyang:Institute of Metal Research,Chinese Academy of Sciences,2001(张波.LY12CZ铝合金及其铆接联接件在氯化钠溶液中的腐蚀疲劳研究[D].沈阳:中国科学院金属研究所,2001)
[6]Liu Y M,Jiang J L,Shan Y S.Some effects on fatigue properties under protection/unprotection coating systems[J].Acta Aeronautica et Astronautica Sinica,1998,19(4):481-485(刘一鸣,蒋军亮,山永寿.环境对有/无防护涂层结构疲劳性能的影响[J].航空学报.1998,19(4):481-485)
[7]Zhang Z G,Zhang B,Han E H,et al.Influence og stress amplitude and corrosive factors on corrosion fatigue life of riveted joints[J].J.Mechanical Strength,2001,23(2):243-245(张正贵,张波,韩恩厚等.应力与腐蚀因素对连接件腐蚀疲劳寿命交互作用的研究[J].机械强度,2001,23(2):243-245)
[8]Zhang Z G.The investigation of corrosion fatigue on riveted joiots[D].Shengyang:Northeastern University,2000(张正贵.连接件腐蚀疲劳性能的研究[D].沈阳:东北大学,2000)
[9]Liu Z M,Zeng F Y,Lu L J,et al.An effect of corrosion environment on fatigue properties of LY12CZ Al-Alloy typical bolted lap joints[J].J.Chin.Soc.Corros.Prot.,2004,24(5):267-271(刘祖铭,曾凡阳,鲁礼菊等.环境对LY12CZ铝合金典型螺接件疲劳性能的影响[J].中国腐蚀与防护学报,2004,24(5):267-271)
[10]Chang H,Han E H,Wang J Q,et al.Influence of coating of covering airplane on corrosion fatigue life of aluminum alloy LY12CZ[J].J.Chin.Soc.Corros.Prot.,2006,25(1):34-36(常红,韩恩厚,王俭秋等.飞机蒙皮涂层对LY12CZ铝合金腐蚀疲劳寿命的影响[J].中国腐蚀与防护学报,2006,25(1):34-36)
[11]Li D,Zhang Q,Wang D Z,et at.Study of the simulated test for the intergranular corrosion of LY12CZ Al alloy[J].J.BeijingUniversity of Aeronautics and Astronautics,1998,24(1):1-3(李荻,张琦,王弟珍等.LY12CZ铝合金晶间腐蚀模拟试验研究[J].北京航空航天大学学报,1998,24(1):1-3)
[12]Zhang D.The trace Analysis of Mechanical Failure[M].Beijing:Defense Industry Press,1996(张栋.机械失效的痕迹分析[M].北京:国防工业出版社,1996)
[13]Jiang Z G.Corrosion Fatigue of Airplane Structure[M].Beijing:Aviation Industry Press,1992(蒋祖国.飞机结构腐蚀疲劳[M].北京:航空工业出版社,1992)
[14]Wu Y S,Xie J H,Wang X Y,et at.Initiation mechanism of corrosion fatigue crack for stainless steel in chloride solution[J].Corros.Sci.Prot.Technol.,1999,11(1):24-31(吴荫顺,谢建辉,汪轩义等.氯化物溶液中不锈钢腐蚀疲劳裂纹初始萌生的过程机理[J].腐蚀科学与防护技术,1999,11(1):24-31)
[1] 刘夏城, 邹建荣, 高良文, 周龙, 谭季波, 吴欣强, 张兹瑜. 压水堆核电站不锈钢焊缝材料腐蚀疲劳模型[J]. 中国腐蚀与防护学报, 2026, 46(5): 1613-1618.
[2] 俞春林, 顾铭飞, 孙一昂, 袁可鑫, 杨静, 王丽熙, 朱承飞, 朱海奎. 海洋环境中316不锈钢表面喷涂粉末涂层的耐久性评估[J]. 中国腐蚀与防护学报, 2026, 46(5): 1627-1633.
[3] 庞成泽, 邢少华, 杜敏, 徐铖. 海洋环境下铝合金腐蚀磨损研究进展[J]. 中国腐蚀与防护学报, 2026, 46(4): 962-970.
[4] 夏晓健, 张晨宇, 严康骅, 张波, 邓晨曦, 谢宇鹏, 闵星瑞, 李梦妤, 张瑞丰. 含微量Er铝合金导线力学性能与腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1177-1184.
[5] 王蝶, 杜宝帅, 贾泽阳, 樊志彬, 姜波, 高瑾, 杜翠薇. 富锌涂料中锌粉形态对涂层阴极保护性能和机理的影响研究[J]. 中国腐蚀与防护学报, 2026, 46(3): 938-944.
[6] 谢睿, 蒋全通, 韩东晓, 陈烨, 刘万鹏, 裴炎彤, 段继周, 侯保荣. Al-10%RE (RE = Ce、Nd、Y、La)合金在典型海洋大气环境下的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 365-380.
[7] 张俊男, 彭灿, 付琦, 张亮, 宋光铃. 海洋环境中铜绿假单胞菌对增材制造Al-Mg-Sc-Zr合金腐蚀行为影响研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 60-70.
[8] 陈思敏, 练龙江, 黄延淞, 曾兰香, 雷冰, 孟国哲. 乙二醇-水冷媒中Cu-Al电偶腐蚀行为及反应机制研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 299-307.
[9] 王得, 张璠, 王兴奇, 张贺新, 赵成志, 杨延格. 单组分氟碳改性环氧涂层对碳钢和铝合金长期防腐性能的对比研究[J]. 中国腐蚀与防护学报, 2025, 45(6): 1549-1562.
[10] 李瓒龙, 颜晴, 满成. 加压载荷和摩擦频率对7075铝合金磨损腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2025, 45(6): 1669-1678.
[11] 孙欣蕾, 曹京宜, 殷文昌, 方志刚, 王峰, 王兴奇, 杨延格. 高温高湿环境下玻璃纤维增强乙烯基酯复合材料的失效行为研究[J]. 中国腐蚀与防护学报, 2025, 45(6): 1679-1688.
[12] 张德平, 闫立震, 于洋, 杨广明, 代春宇, 孟乐, 徐博, 刘智勇. CO2 驱采油井复杂环境中N80油管断裂失效机理[J]. 中国腐蚀与防护学报, 2025, 45(6): 1698-1708.
[13] 阮智邦, 魏仕轩, 王树鹏, 吕正平, 李格升, 李燚周. 中性氯化钠溶液中咪唑啉磷酸酯对7075铝合金电偶腐蚀抑制行为研究[J]. 中国腐蚀与防护学报, 2025, 45(6): 1734-1740.
[14] 史轩铭, 谭季波, 张兹瑜, 吴欣强. 铅冷快堆候选结构材料液态铅铋共晶环境中疲劳行为研究进展[J]. 中国腐蚀与防护学报, 2025, 45(5): 1187-1195.
[15] 夏大海, 潘成成, 郭玉杰, 胡文彬, TRIBOLLET Bernard. EIS研究7050铝合金在NaCl溶液空蚀作用下的界面状态与腐蚀机制[J]. 中国腐蚀与防护学报, 2025, 45(5): 1196-1204.