Please wait a minute...
J Chin Soc Corr Pro  2008, Vol. 28 Issue (3): 141-145     DOI:
Research Report Current Issue | Archive | Adv Search |
Study of deposition characteristic for electroless plating nickel on Gr/Al composite surface and its corrosion resistance
哈尔滨工业大学材料学院
Download:  PDF(1037KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The deposition characteristic of electroless plating Ni-P on Gr/Al composite surface and coatings corrosion resistance are investigated for the particularity of Gr/Al composite surface in this paper. During forming nucleus of action points, chemical displacement reaction is taking place in the dipping zinc solution on the Al substrate, but nucleus of action points are adorpted on the reinforcement graphite fibers surface, because Al is part of the second surface and graphite is part of the third surface. After formation nucleus for depositing nickel, Ni-P alloys would deposit on the Gr/Al composite surface. It is result that Ni-P coating blocked off the circuit for the electrochemical reaction in galvanic couples, and the non-crystal coatings had not sensitive grains boundary for the corrosion reaction, the corrosion resistance was improved by Ni-P coating.
Key words:  Gr/Al composites      electroless plating nickel      deposition characteristic      corrosion resistance      
Received:  23 October 2006     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

Cite this article: 

. Study of deposition characteristic for electroless plating nickel on Gr/Al composite surface and its corrosion resistance. J Chin Soc Corr Pro, 2008, 28(3): 141-145 .

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2008/V28/I3/141

[1]Sobczak N,Sobczak J,Seal S,et al.TEM examination of the ef-fect of the Al/C interface structure[J].Mater.Chem.Phys.,2003,81:319-322
[2]Silvaina J F,Proultb A,Lahayea M,et al.Microstructure and chemical analysis of C/Cu/Al interfacial zones[J].Composites:Part A,2003,34:1143-1149
[3]Dash L C,The Mechanism of Corrosion and Corrosion Control of Aluminum/Graphite Metal Matrix Composites[D].Ohio State U-niversity,1988
[4]Bhagat R B,Amateau M F,Conway J R,et al.The corrosion protection of Cf/Al in 3.5%sodium chloride[J].Compos.Mater.,1989,23:961-971
[5]Feng L J,Ma X J,Lei A L.Corrosion resistance of electroless plating Ni-P alloy coating in sulfur-bearing solution[J].J.Chin.Soc.Corros.Prot.,2006,26(3):157-159(冯拉俊,马小菊,雷阿利.含硫介质中化学镀Ni-P合金镀层耐蚀性研究[J].中国腐蚀与防护学报,2006,26(3):157-159)
[6]Qin X J,Shao G J.Study on the initial electro-deposition behav-ior of Ni-P alloy[J].J.Chin.Soc.Corros.Prot.,2004,24(1):6-9(秦秀娟,邵光杰.电沉积Ni-P合金初期沉积行为的研究[J].中国腐蚀与防护学报,2004,24(1):6-9)
[7]Wang S L,Xu X B,Wu H H.Preparation and corrosion proper-ties of electroless Ni-Zn-P alloy deposits[J].J.Chin.Soc.Cor-ros.Prot.,2004,24(5):297-300(王森林,徐旭波,吴辉煌.化学沉积Ni-Zn-P合金制备和腐蚀性能研究[J].中国腐蚀与防护学报,2004,24(5):297-300)
[8]Lu F,Zhang X Y,Tang Z H,et al.Galvanic corrosion behavior between carbon fiber reinforced plastic materials and aluminumalloys[J].J.Chin.Soc.Corros.Prot.,2005,25(2):39-44(陆峰,张晓云,汤智慧等.碳纤维复合材料与铝合金电偶腐蚀行为研究[J].中国腐蚀与防护学报.2005,25(2):39-44)
[9]Yan M,Zhang X X,Wu L.Effects of ultrasonic electroless Ni-Pplating on the corrosion resistance of sintered NdFeB magnets[J].J.Chin.Soc.Corros.Prot.,2006,26(2):100-102(严密,张小星,吴磊.超声化学镀对烧结钕铁硼磁体抗腐蚀性能的影响[J].中国腐蚀与防护学报,2006,26(2):100-102)
[10]Wang C Y,Wu G H,Gou H S.Study of double-layer passiva-tion black coating on Gr/Al composite surface[J].J.Funct.Mater.,2006,37:504-509(王春雨,武高辉,苟华松.Gr/Al复合材料表面镀覆双层金属黑色钝化膜的工艺研究[J].功能材料,2006,37:504-509)
[11]Li L B,An M Z,Wu G H,et al.A study of electroless Ni plat-ing on SiCp/Al composite materials[J].Electroplating.Pollut.Control,2005,25(1):21-23(李丽波,安茂忠,武高辉等.SiCp/Al复合材料化学镀镍工艺的研究[J].电镀与环保,2005,25(1):21-23)
[12]Wang X W.On the corrosion resistant mechanism of electroless nickel coating on hard aluminum alloy[J].Plate.Finish.,2002,24(2):14-17(王晓伟.硬铝合金化学镀镍耐蚀机理[J].电镀与精饰,2002,24(2):14-17)
[13]Li L B,An M Z,Wu G H.Corrosion resistance of electroless Ni coatings on SiCp/Al composite and mechanism[J].J.Chin.Soc.Corros.Prot.,2006,26(3):160-165(李丽波,安茂忠,武高辉.SiCp/Al复合材料化学镀镍层耐蚀性能及机理研究[J].中国腐蚀与防护学报,2006,26(3):160-165)
[14]Li N,Yuan G W,Li D Y.Theoretic and Technic of Electroless Plating Nickel Matrix Alloys[M].Harbin:Harbin Institute ofTechnology Press,2005,5(李宁,袁国伟,黎德育.化学镀镍基合金理论和技术[M].哈尔滨:哈尔滨工业大学出版杜,2005,5)
[15]Liu X K,Xiang Y H,Hu W B,et al.Adhesion mechanism of direct electroless nickel coating on magnesium alloys[J].J.Chin.Soc.Corros.Prot.,2002,22(4):233-236(刘新宽,向阳辉,胡文彬等.镁合金化学镀镍层的结合机理[J].中国腐蚀与防护学报,2002,22(4):233-236)
[16]Li L B,An M Z,Wu G H.Model of electroless Ni deposition on SiCp/Al composites and study of the interfacial interaction of coat-ings with substrate surface.[J].J.Appl.Surf.Sci.,2005,252:959-965
[17]Gao J Q,Liu L,Shen B,et al.Crystallization behavior of Al2O3 nano-composite coatings prepared by electroless plating[J].J.Chin.J.Nonferrous Met.,2004,14(1):64-68(高加强,刘磊,沈彬等.纳米氧化铝粒子对化学镀镍-磷合金晶化行为的影响[J].中国有色金属学报,2004,14(1):64-68)
[18]Cao C N.Corrosion Electrochemistry[M].Beijing:Chemical In-dustry Press,1994.(曹楚南.腐蚀电化学[M].北京:化学工业出版社,1994)
[1] HAN Yuetong, ZHANG Pengchao, SHI Jiefu, LI Ting, SUN Juncai. Surface Modification of TA1 Bipolar Plate for Proton Exchange Membrane Fuel Cell[J]. 中国腐蚀与防护学报, 2021, 41(1): 125-130.
[2] SHI Kunyu, WU Weijin, ZHANG Yi, WAN Yi, YU Chuanhao. Electrochemical Properties of Nb Coating on TC4 Substrate in Simulated Body Solution[J]. 中国腐蚀与防护学报, 2021, 41(1): 71-79.
[3] BAO Ren, ZHOU Genshu, LI Hongwei. Preparation of High-tin Bronze Corrosion-resistant Coating by Potentiostatic Pulse Electrodeposition[J]. 中国腐蚀与防护学报, 2020, 40(6): 585-591.
[4] LIU Haixia, HUANG Feng, YUAN Wei, HU Qian, LIU Jing. Corrosion Behavior of 690 MPa Grade High Strength Bainite Steel in a Simulated Rural Atmosphere[J]. 中国腐蚀与防护学报, 2020, 40(5): 416-424.
[5] LI Congwei, DU Shuangming, ZENG Zhilin, LIU Eryong, WANG Feihu, MA Fuliang. Effect of Current Density on Microstructure, Wear and Corrosion Resistance of Electrodeposited Ni-Co-B Coating[J]. 中国腐蚀与防护学报, 2020, 40(5): 439-447.
[6] CAO Jingyi, FANG Zhigang, CHEN Jinhui, CHEN Zhixiong, YIN Wenchang, YANG Yange, ZHANG Wei. Preparation and Properties of Micro-arc Oxide Film with Single Dense Layer on Surface of 5083 Aluminum Alloy[J]. 中国腐蚀与防护学报, 2020, 40(3): 251-258.
[7] WANG Le,YI Danqing,LIU Huiqun,JIANG Long,FENG Chun. Effect of Ru on Corrosion Behavior of Ti-6Al-4V Alloy and Its Mechanism[J]. 中国腐蚀与防护学报, 2020, 40(1): 25-30.
[8] SHI Chao,SHAO Yawei,XIONG Yi,LIU Guangming,YU Yuelong,YANG Zhiguang,XU Chuanqin. Influence of Silane Coupling Agent Modified Zinc Phosphate on Anticorrosion Property of Epoxy Coating[J]. 中国腐蚀与防护学报, 2020, 40(1): 38-44.
[9] WU Dongcai,HAN Peide. Effects of Moderate Temperature Aging Treatment on Corrosion Resistance of SAF2304 DuplexStainless Steel[J]. 中国腐蚀与防护学报, 2020, 40(1): 51-56.
[10] YANG Yinchu,FU Xiuqing,LIU Lin,MA Wenke,SHEN Moqi. Electrochemical Corrosion of Ni-P-BN(h)-Al2O3 Composite Coating Deposited by Spray Electrodeposition[J]. 中国腐蚀与防护学报, 2020, 40(1): 57-62.
[11] XIAO Jintao,CHEN Yan,XING Mingxiu,JU Pengfei,MENG Yingen,WANG Fang. Effect of Process Parameters on Corrosion Resistance of Anodizing Film on 2195 Al-Li Alloy[J]. 中国腐蚀与防护学报, 2019, 39(5): 431-438.
[12] SHI Kunyu,ZHANG Jinzhong,ZHANG Yi,WAN Yi. Preparation and Corrosion Resistance of Nb2N Coating on TC4 Ti-alloy[J]. 中国腐蚀与防护学报, 2019, 39(4): 313-318.
[13] SUN Xiaoguang,HAN Xiaohui,ZHANG Xingshuang,ZHANG Zhiyi,LI Gangqing,DONG Chaofang. Corrosion Resistance and Environmentally-friendly Chemical Passivation of Welded Joints for Ultra-low Carbon Austenitic Stainless Steel[J]. 中国腐蚀与防护学报, 2019, 39(4): 345-352.
[14] Duoyun CHENG,Jinbin ZHAO,Bo LIU,Cheng JIANG,Xiaoqian FU,Xuequn CHENG. Corrosion Behavior of High Nickel and Conventional Weathering Steels Exposed to a Harsh Marine Atmospheric Environment at Maldives[J]. 中国腐蚀与防护学报, 2019, 39(1): 29-35.
[15] Delin LAI,Gang KONG,Chunshan CHE. Effect of Sodium Silicate Sealing on Corrosion Resistance of TiO2Conversion Film on Hot-dip Galvanized[J]. 中国腐蚀与防护学报, 2018, 38(6): 607-614.
No Suggested Reading articles found!