Please wait a minute...
J Chin Soc Corr Pro  2007, Vol. 27 Issue (4): 202-205     DOI:
Research Report Current Issue | Archive | Adv Search |
INFLUENCE OF ADDITIONS OF Al2O3 POWDERS IN ELECTROLYTICAL SOLUTION ON MICROSTRUCTURE AND CORROSION PROTECTION OF CERAMIC COATINGS FORMED ON MAGNESIUM ALLOY DURING MICRO-ARC OXIDATION
;;;
太原理工大学;表面工程研究所
Cite this article: 

;. INFLUENCE OF ADDITIONS OF Al2O3 POWDERS IN ELECTROLYTICAL SOLUTION ON MICROSTRUCTURE AND CORROSION PROTECTION OF CERAMIC COATINGS FORMED ON MAGNESIUM ALLOY DURING MICRO-ARC OXIDATION. J Chin Soc Corr Pro, 2007, 27(4): 202-205 .

Download:  PDF(318KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  AZ91D magnesium alloy was treated by micro-arc oxidation (MAO) in the optimized composite solution of silicate-phosphate system in which Al2O3 powders were added.Morphological characteristic and phase constituent of ceramic coatings were analyzed using the scanning electron microscope (SEM) and the x-ray diffraction (XRD).The results showed that after adding Al2O3 powders pores in ceramic coatings decreased and the loose layer became more compact,new phase of Al2O3 appeared.Electrochemical corrosion experiments in 3.5%NaCl solution showed that corrosion resistance of ceramic coatings after adding Al2O3 powders was also improved greatly.
Key words:  magnesium alloy      Al2O¬      3 powders      micro-arc oxidation(MAO)      morphologies characteristic      phase      
Received:  10 January 2006     
ZTFLH:  TG146。2  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
()
Articles by authors

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2007/V27/I4/202

[1]Chen Z H,Yan H G,Chen J H,et al.Magnesium Alloy[M].Bei-jing:Chemical Industry Press,2004(陈振华,严红革,陈吉华等.镁合金[M].北京:化学工业出版社,2004)
[2]Xue W B,Deng Z W,Lai Y C,et al.Microphase and forming ofceramic coatings by micro-arc oxidation on LY12[J].Chin.J.Mater.Res.,1997,11(2):169-169(薛文斌,邓志威,来永春等.LY12铝合金微弧氧化陶瓷膜相分布及形成[J].材料研究学报,1997,11(2):169-169)
[3]Xue W B,Lai Y C,Deng Z W,et al.The properties of coating formed by micro-plasma oxidation on magnesium alloy[J].Mater.Sci.Technol.,1997,5(2):89-92(薛文斌,来永春,邓志威等.镁合金微等离子体氧化膜的特性[J].材料科学与工艺,1997,5(2):89-92)
[4]Jiang B L,Wu G J,Zhang S F,et al.Research on micro-mecha-nism and growth procedure of ceramic coating formed by micro-arc oxidation on magnesium alloys[J].Transaction of Materials andHeat Treatment,2002,23(1):5-8(蒋百灵,吴国建,张淑芬等.镁合金微弧氧化陶瓷层生长过程及微观结构的研究[J].材料热处理学报,2002,23(1):5-8)
[5]Wei Z L,Chen Q R,Guo X C,et al.Microstructure and corrosion resistance of ceramic coating on magnesium alloy[J].Mater.Prot.,2003,36(10):21-23(卫中领,陈秋荣,郭歆聪等.镁合金微弧氧化膜的微观结构及耐蚀性研究[J].材料保护,2003,36(10):21-23)
[6]Liu Y H.Electrochemical Test Technology[M].Beijing:Bei-jing Aeronautical Academic Press,1986(刘永辉.电化学测试技术[M].北京:北京航空学院出版社,1986)
[1] HAN Yu, XU Song, HUA Siran, ZHAO Peng, WANG Xiaojie, XIA Xiaojian, ZHANG Junxi. Corrosion Behavior in 3.5%NaCl Solution of Constituent Phases of Hot-dip Galvanized Coating[J]. 中国腐蚀与防护学报, 2026, 46(2): 558-566.
[2] HU Zongwu, LIU Jianguo, WANG Yu, LI Kai. Erosion-corrosion Failure Mechanism of 90° Elbow in 3.5%NaCl Solution Containing Sand[J]. 中国腐蚀与防护学报, 2026, 46(2): 611-619.
[3] ZHU Dingding, ZHAO Xiya, ZHANG Xiaomei, MEI Ziqi, LU Wenjun, WANG Shuai. Comparative Characterization of Microstructure and High-temperature Oxidation Behavior of Additive Manufacturing and Casting TiAl Alloy[J]. 中国腐蚀与防护学报, 2026, 46(1): 71-80.
[4] ZHUANG Zhaotao, YAN Haojie, XIE Bing, GUI Ye, SUN Qingqing, WU Liankui, CAO Fahe. High-temperature Oxidation Behavior of Liquid-phase Fluorination Treated Ti45Al8.5Nb Alloy[J]. 中国腐蚀与防护学报, 2025, 45(6): 1517-1527.
[5] HE Yan, LIU Yan, TIAN Hua, CHEN Ye. Effect of Low Temperature Diffusion Pretreatment on Precipitation of Phases During Post-aging Treatment for B-containing S31254 Super Austenitic Stainless Steel and its Corrosion Resistance[J]. 中国腐蚀与防护学报, 2025, 45(6): 1773-1778.
[6] CAI Ketao, JI Lei, ZHANG Zhen, FENG Qiang, DENG Weilin, LAN Guihong, HE Sha, ZHAO Zhanyong, BAI Peikang. Corrosion Behavior of Mg-Gd-Y-Zn-Zr Alloy in NaCl and Na2SO4 Solutions[J]. 中国腐蚀与防护学报, 2025, 45(5): 1289-1299.
[7] ZHAO Xinyu, LIU Enze, ZHANG Gong, ZHAO Yuan, NING Likui, XIN Xin, JIA Dan, LIU Weihua, TAN Zheng. Hot Corrosion Behavior of Brazed Joints of Single Crystal Ni-based DD10 Alloy Beneath Na2SO4 Deposit in Air at 850 and 900 ℃[J]. 中国腐蚀与防护学报, 2025, 45(5): 1361-1370.
[8] YAN Chongchong, XIE Guangming, HUA Jian, ZENG Yun, ZHOU Sizhu, YU Zekun. Numerical Simulation of Erosion Wear on Non-circular Elbows[J]. 中国腐蚀与防护学报, 2025, 45(5): 1425-1432.
[9] ZHAI Yaru, XIONG Jinping, ZHAO Jingmao. Corrosion Inhibition Performance of Nitrobarbituric Acid on Mg-alloys AZ31B and AZ91D in 3.5%NaCl Solution[J]. 中国腐蚀与防护学报, 2025, 45(4): 916-926.
[10] DUAN Jingmin, DONG Yong, MIAO Dongmei, YANG Yujing, MAO Lingbo, ZHANG Zhengrong. Corrosion Behavior in Different Media and Mechanical Properties of Al0.5CoCrFeNi High-entropy Alloy After Heat Treatment[J]. 中国腐蚀与防护学报, 2025, 45(4): 983-994.
[11] XIAO Qikun, MA Jun, GUO Kai, XIONG Xin, YUAN Haoran. Numerical Simulation of Erosion Wear in Slurry Pipeline Based on DDPM-RSM[J]. 中国腐蚀与防护学报, 2025, 45(3): 709-719.
[12] HOU Xiaoben, LIU Ning, HU Junying. Corrosion Behavior and Distribution of Corrosion Inhibitors in Inclined Section for Natural Gas Gathering and Transportation Pipelines[J]. 中国腐蚀与防护学报, 2025, 45(3): 780-786.
[13] LIU Tianle, WEI Boxin, FU Anqing, SU Hang, CHEN Tingshu, WANG Chaoming, WANG Sui. Hydrogen Damage of X80 Pipeline Steel in Hydrogen-doped Gaseous Atmosphere[J]. 中国腐蚀与防护学报, 2025, 45(2): 423-430.
[14] LEI Aijia, DAI Xun, XU Jiangtao, DENG Ruiju, HUANG Xuefei. Optimization of Heat Treatment Process and Corrosion Performance in High-temperature and High-pressure of Zr-1.35Sn-0.22Fe-0.13Cr-0.05Ni Alloy[J]. 中国腐蚀与防护学报, 2025, 45(2): 497-505.
[15] LI Kaiyang, ZHAI Yunlong, HU Xinyu, WU Hong, LIU Bin, XING Shaohua, HOU Jian, ZHANG Fan, ZHANG Naiqiang. Research Progress on High Temperature Corrosion of Eutectic High Entropy Alloys[J]. 中国腐蚀与防护学报, 2024, 44(6): 1377-1388.
No Suggested Reading articles found!