A FRACTURE MODEL FOR CORROSION FATIGUE CRACK PROPAGATION PROCESS

J Chin Soc Corr Pro

1998, Vol. 18

Issue (2): 87-94 DOI:

Current Issue | Archive | Adv Search

A FRACTURE MODEL FOR CORROSION FATIGUE CRACK PROPAGATION PROCESS

WANG Rong(Xi'an Petroleum Institute; Xi'an 710061)

Download:

PDF(1193KB)
Export: BibTeX | EndNote (RIS)

Abstract Taking into simultaneous consideration of the modified static fracture model for fatigue crack propagation and the corrosion dissolution of the bare metal surface at a crack tip, a corrosion-bluntening-fracture model for corrosion fatigue crack propagation (CFCP) was proposed. According to the new model and linear elastic fracture mechanics, an expression for CFCP rate, which revealed the quantitative correlation among CFCP rate, stress intensity factor amplitude, the CFCP threshold, the corrosion rate of the bare metal at the crack tip, loading frequency and the critical fracture stress of the hypothetical material elements along the crack path, was derived. The expression could interpret the effect of hydrogen embrit-tlement on the CFCP process. The experimental results showed that the expression gave a good fit to the CFCP rates of two commercial aluminum alloys in 3.5% NaCl solution at loading frequency 10Hz.

Key words: Corrosion fatigue crack propagation Material elements Fracture Corrosion dissolution Aluminum alloy

Received: 25 April 1998

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

Cite this article:

WANG Rong(Xi'an Petroleum Institute; Xi'an 710061). A FRACTURE MODEL FOR CORROSION FATIGUE CRACK PROPAGATION PROCESS. J Chin Soc Corr Pro, 1998, 18(2): 87-94.

URL:

https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y1998/V18/I2/87

1 Wei R P, Landes I D. Mats. Stand., 1969, 9(1):25
2 Dill H D, Saff C R. Environmental-Load Interaction Effects on Crack Growth, AFFDL-TR-78-137,1978
3 Holroyd N J H, Hardie D. Corro. Sci., 1983, 23(6):527
4 Hagn L. Mats. Sci. and Eng., 1988, A103(1):193
5 Lee U E. Corrosion fatigue and stress corrosion cracking of 7475 aluminum alloy, In: Corrosion Cracking, ASM, 1985. 123
6 Dover W D, Glinka G, Renolds A G(ed). Fatigue and Crack Growth in Offshore Structures, Conf. Proc., London, 1986
7 Zheng Xiulin, Hirt M A. Eng. Fract. Mech., 1983, 18(5): 965
8 Wanhill R J H, DeLuccia J J, Russo M T. The Fatigue in Aircraft Corrosion Testing(FACT), AGARD Rep. 713(AD-208359), 1989
9 Lai D N, Weiss V. Metall. Trans., 1978, 9A(2):413
10 萧纪美编著.金属韧性与韧化,上海科学技术出版社,1982
11 Bolton J D. Redington M L. Int. J. Fatigue, 1983, 5(3): 155
12 Lu Minxu, Zheng xiulin. Eng. Fract. Mech., 1993, 45(5): 889
13 Chen G S, Duquette D J. Metall. Trans., 1993, 23A(5): 1563
14 郑修麟著.金属疲劳的定量理论,西安:西北工业大学出版社,1994
15 路民旭,刘晓坤,王建军,郑修鳞.中国腐蚀与防护学报,1994,14(4):255
16 Chalant G, Petit J, Suyitno B. Fatigue 90, 1990. 1771
17 Dill H D, Saff C R, Enviroment-Load Interaction Effects on Crack Growth, AFFDL-TR-78-137,1979

[1]	ZHAO Dongyang, ZHOU Yu, WANG Dongying, NA Duo. Effect of Phosphating on Hydrogen Embrittlement of SA-540 B23 Steel for Nuclear Reactor Coolant Pump Bolt[J]. 中国腐蚀与防护学报, 2020, 40(6): 539-544.
[2]	HU Lulu, ZHAO Xuyang, LIU Pan, WU Fangfang, ZHANG Jianqing, LENG Wenhua, CAO Fahe. Effect of AC Electric Field and Thickness of Electrolyte Film on Corrosion Behavior of A6082-T6 Al Alloy[J]. 中国腐蚀与防护学报, 2020, 40(4): 342-350.
[3]	CAO Jingyi, FANG Zhigang, CHEN Jinhui, CHEN Zhixiong, YIN Wenchang, YANG Yange, ZHANG Wei. Preparation and Properties of Micro-arc Oxide Film with Single Dense Layer on Surface of 5083 Aluminum Alloy[J]. 中国腐蚀与防护学报, 2020, 40(3): 251-258.
[4]	WANG Yingjun, LIU Honglei, WANG Guojun, DONG Kaihui, SONG Yingwei, NI Dingrui. Investigation of Anodic Film on a Novel RE-containing Al-Alloy Al-Zn-Mg-Cu-Sc[J]. 中国腐蚀与防护学报, 2020, 40(2): 131-138.
[5]	REN Jianping,SONG Renguo. Effect of Two-stage Ageing on Mechanical Properties and Sensitivity to Hydrogen Embrittlement of 7050 Aluminum Alloy[J]. 中国腐蚀与防护学报, 2019, 39(4): 359-366.
[6]	Gaohong CHEN,Yuansen HU,Mei YU,Jianhua LIU,Guoai LI. Effect of Sulfuric Acid Anodizing on Mechanical Properties of 2E12 Al-alloy[J]. 中国腐蚀与防护学报, 2018, 38(6): 579-586.
[7]	Chao SUN, Xiao YANG, Yuhua WEN. Effect of High-Al Austenitic Stainless Alloy Coatings Prepared by Magnetron Sputtering on High Temperature Oxidation Resistance of 316 Stainless Steel[J]. 中国腐蚀与防护学报, 2017, 37(6): 590-596.
[8]	Weihang ZHAO, Haowei WANG, Guangyi CAI, Zehua DONG. Localized Corrosion and Corrosion Inhibitor of Al-alloy AA6061 Beneath Electrolyte Layers[J]. 中国腐蚀与防护学报, 2017, 37(4): 366-374.
[9]	Herong ZHOU,Bihua HU,Wang YAO,Xinpei HONG,Shupeng SONG. Atmospheric Corrosion of Anodized Pure Al 1060, Al-alloys 2A12 and 7A04 Exposed to Polluted Atmospheric Environment at Jiangjin Region[J]. 中国腐蚀与防护学报, 2017, 37(3): 273-278.
[10]	Yun DAI,Shengdan LIU,Yunlai DENG,Xinming ZHANG. Pitting Corrosion of 7020 Aluminum Alloy in 3.5%NaCl Solution[J]. 中国腐蚀与防护学报, 2017, 37(3): 279-286.
[11]	Fengxuan SONG,Qizhong ZHAO,Feilong LI,Yuelu REN,Kui HUANG,Xinming ZHANG. Effect of Aging Treatment on Corrosion Rate of 7050 Al-alloy Plate[J]. 中国腐蚀与防护学报, 2017, 37(3): 287-292.
[12]	Ziheng BAI,Yunhua HUANG,Xiaogang LI,Lang YANG,Chaofang DONG,Lidan YAN,Kui XIAO. Environmental Corrosion in Industrial-marine Atmosphere at Qingdao of 7050 Al-alloy Anodized in Boric- and Sulfuric-acid Electrolyte[J]. 中国腐蚀与防护学报, 2016, 36(6): 580-586.
[13]	Jingling MA,Fengzhang REN,Guangxin WANG,Yi XIONG,Jiuba WEN. Electrochemical Performance of Al-Mg-Sn-Ga Aluminum Anode Alloy[J]. 中国腐蚀与防护学报, 2016, 36(5): 421-426.
[14]	Feng ZHAO, Fayun LU, Nan MU, Fuan GUO, Li ZHANG. Relations between Microstructure and Exfoliation Corrosion Resistance of 7050 Al-alloy[J]. 中国腐蚀与防护学报, 2015, 35(5): 423-428.
[15]	Bo JI,Xinming ZHANG,Zhuofu ZHANG,Lingying YE,Wenjian LI. Influence of Yb Addition on Resistance to Exfoliation Corrosion of Aluminum Alloy 2519A[J]. 中国腐蚀与防护学报, 2015, 35(3): 279-286.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed