Please wait a minute...
中国腐蚀与防护学报  2008, Vol. 28 Issue (2): 112-115          
  研究报告 本期目录 | 过刊浏览 |
热处理对铅锡青铜耐腐蚀性能的影响
凡小盼;王昌燧;金普军
中国科学技术大学
The Heat Treatment and the Corrosive Prevention of Bronz
;;
中国科学技术大学
引用本文:

凡小盼; 王昌燧; 金普军 . 热处理对铅锡青铜耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2008, 28(2): 112-115 .

全文: PDF(946 KB)  
摘要: 利用传统浇铸技术铸造含15% Sn的Cu-Sn-Pb青铜合金。经不同温度热处理及未经热处理的样品在酸性含Cl- 环境中进行腐蚀试验,用金相和XRD分析两者的耐腐蚀性能。结果表明:经过热处理后,其内部的晶间组织结构发生改变,δ相分解或减少,α相再结晶。选择合适的热处理温度可以增强青铜的耐腐蚀能力,达到控制" 粉状锈"的效果。
关键词 : 青铜合金,  腐蚀,  金相,  晶间结构,  热处理    
Abstract:This paper presents an analytical study on two ternary Cu-Sn-Pb systems forged by using the Chinese traditional casting technique with difference in the amount of tin 15%. We had some of these copper alloys heat?鄄ed under different temperatures, then kept all the heated and unheated samples under an acid and chlorine-rich environment for several days.With the combined use of XRD analysis and metallographic examination, corrosion resistance of copper alloys was carefully discussed. The delta phase decomposed or diminished while the alpha phase recrystallized. When a proper temperature was chosen for reheating, the delta phase was found eliminated and the intergranular structure changed again. This experiment indicates that by doing so the corrosion resistance of copper alloys can be greatly improved, which in return helps controlling the outbreak of bronze disease.
Key words: bronze alloy    corrosion    microstructure    intergranular structure    heat treatment
收稿日期: 2006-07-26     
[1]Liu Y,Yuan S X,Zhang X M.Research on the corrosion of bronze wares excavated from Tianma Qucun site of Jin state in Zhou Dy-nasty[J].Sciences of Conservation and Archaeology,2002,12(2):9-18(刘煜,原思训,张晓梅.天马一曲村周代晋国墓地出土青铜器锈蚀研究[J].文物保护与考古科学,2002,12(2):9-18)
[2]Luoyang Copper Processing Factory.Metallographic Graphs of Copper and Copper Alloys[M].Luoyang:Metallurgical Industry Publishing Company,1983(洛阳铜加工厂中心试验室金相组.铜及铜合金金相谱图[M].洛阳:冶金工业出版社,1983)
[3]Wang C S,Yuan M,Xiong Y H.Bronze composition and the for-mation of powdery corrosion[J].J.China Univ.Sci.Technol.,1995,25(4):448-453(王昌燧,袁玫,熊永红.青铜合金成分与粉状锈的生成[J].中国科学技术大学学报,1995,25(4):448-453)
[4]Zhang C Q,Wu Y S,Fang M X,et al.The anodic behavior of alloy and ingredient of bronze alloy[J].J.Mater.Eng.,1999,11:23-26(张长桥,吴佑实,方梅仙等.青铜合金成分与合金的阳极行为[J].材料工程,1999,11:23-26)
[5]Zhang X M,Yuan S X.Research on the corrosion of bronzes from Zhouyuan site and Yu state cemeteries[J].Sciences of Conserva-tion and Archaeology,1999,11(2):7-18(张晓梅,原思训.周原遗址及渔国墓地出土青铜器锈蚀研究[J].文物保护与考古科学,1999,11(2):7-18)
[6]Wu Y S,Fan C Z,Minoru Suzuki.A calculation of quantum-me-chanics for the preferential corrosion on the crystal edge of bronzealloy[J].Sciences of Conservation and Archaeology,1994,6(1):1-8(吴佑实,范崇政,铃木稔.青铜合金表面晶体棱角处优先生锈的量子力学证明[J].文物保护与考古科学,1994,6(1):1-8)
[7]Fan C Z,Wu Y S,Wang C S.The electro-chemical corroding of powder-corrosion and analysis of valent-electron structure[J].Chin.J.Chem.Phys.,1992,5(6):479-484(范崇政,吴佑实,王昌燧等.粉状锈生成的电化学腐蚀及价电子结构分析[J].化学物理学报,1992,5(6):479-484)
[8]Zhang L J,Sun S Y,Yin W Z,et al.Study of element and mi-crostructure of bronze excavated from Yans′tombs at Liulihe,Bei-jing[J].Cultural Relics,2005,6:82-91(张利洁,孙淑云,殷玮璋等.北京琉璃河燕国墓地出土铜器的成分和金相研究[J].文物,2005,6:82-91)
[9]Tian C H.The Technical History of Ancient Chinese Metals[M].Sichuan:Sichuan Science and Technology Publishing Company,1988(田长浒.中国金属技术史[M].四川:四川科技出版社,1988)
[10]He T K.On simulated tests for the heat treatment of ancient bronzemirrors[J].Studies in the History of Sciences,1994,13(1):76-78(何堂坤.古青铜热处理模拟试验[J].自然科学史研究,1994,13(1):76-78)
[11]Fan C Z,Wang C S,Wang S J,et al.Study of formation mecha-nism of bronze powder corrosion[J].China Science(Series B),1991,3:239-245(范崇政,王昌燧,王胜君等.青铜器粉状锈生成机理研究[J].中国科学(B辑),1991,3:239-245)
[12]Fan C Z,Hu K L,Xing J Y,et al.A follow-observation on the de-veloping process of the powder corrosion[J].Sciences of Conser-vation and Archaeology,1997,9(1):19-24(范崇正,胡克良,邢锦云等.青铜粉状锈生长过程的跟踪观测[J].文物保护与考古科学,1997,9(1):19-24)
[13]Fan C Z,Wu Y S,Wang C S,et al.The dynamics of developing process of the powder corrosion[J].China Science(Series B),1992,5:479-484(范崇政,吴佑实,王昌燧等.青铜器粉状锈生长过程的动力学研究[J].中国科学(B辑),1992,5:479-484)
[1] 黎敏, 魏高飞, 邓书端, 李向红. 扫描电化学显微镜(SECM)在缓蚀剂研究中的进展与展望[J]. 中国腐蚀与防护学报, 2026, 46(5): 1326-1342.
[2] 谢敬礼, 王友志, 乔书振, 牛佳雨, 郝龙, 曹胜飞, 王俭秋. 高放废物地质处置库近场环境中碳钢腐蚀产物演化研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1343-1352.
[3] 周书宇, 刘昌璞, 杨留洋, 耿杰, 范海明, 张大磊, 鞠虹. 在超临界CO2 工况和典型环境因素共影响下的管线钢腐蚀及防护技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1353-1368.
[4] 黄绘, 李树丽, 邓书端, 李向红. 自修复材料在防护涂层中的研究进展及展望[J]. 中国腐蚀与防护学报, 2026, 46(5): 1369-1388.
[5] 曾崎, 虞文军, 门向南, 冯保净, 杨耀, 朱凯, 葛玉麟, 应韬, 曾小勤. 高强耐蚀稀土镁合金研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1415-1424.
[6] 张强, 卢壹梁, 金焱, 陈云, 杨丙坤, 王晓芳, 韩钰. 环境腐蚀性分级及大气/土壤腐蚀性地图绘制技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1425-1436.
[7] 许佳程, 刘家兵, 黄诗雨, 金灵好, 谭伟, 郭娜, 刘涛. 人工极地海域环境致EH40船板钢的力学性能损伤与应力腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1437-1451.
[8] 郑凯, 王艺陶, 王东胜, 刘伟, 蒋颖畅, 黄嵘, 常雪婷. 腐蚀-应力耦合作用对极地船用螺旋桨低碳马氏体不锈钢失效机理影响研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1452-1462.
[9] 齐晓涵, 翟海民, 李文生, 洪昊, 曹元, 俞雷, 陈博瀚. Al2O3 磨加量对铝合金搪瓷涂层组织结构及腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1497-1507.
[10] 贾梦瑶, 张伟强, 王媛, 谭季波, 邱建科, 郝延天, 吴欣强. 在3.5%NaCl溶液中压力变化对Ti80合金应力腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1508-1516.
[11] 李晓峰, 李艳茹, 卢云飞, 张泰华, 常雪婷, 安燕. 力学与防腐性能协同增强的聚吡咯改性芳纶纤维/环氧复合涂料[J]. 中国腐蚀与防护学报, 2026, 46(5): 1517-1526.
[12] 曹天慧, 杨砚淇, 刘雨薇, 吴磊, 郭泉忠, 贾志刚, 曹公望, 汪川. 23MnNiMoCr54钢在不同pH的模拟高矿化水中腐蚀机理研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1537-1548.
[13] 赵先锐, 戴中国, 李战江, 徐育烺, 张会霞, 李旺. 添加Y、Hf对AlCoCrFeNi高熵合金涂层在NaCl溶液中的腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1549-1559.
[14] 王兴斌, 李家民, 伍登骏, 唐伟能, 杨静, 郭嘉成, 杨欣宇, 侯娟. Al含量对Mg-xAl-Zn合金耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1560-1568.
[15] 叶海锋, 沈书成, 陈江华. 增材制造316L不锈钢在不同温度海水环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1569-1578.