Please wait a minute...
中国腐蚀与防护学报  2006, Vol. 26 Issue (1): 1-5          
  研究报告 本期目录 | 过刊浏览 |
典型不锈钢晶间腐蚀敏化温度的研究
秦丽雁;张寿禄;宋诗哲
天津大学材料学院
Sensitive Temperatures for Intergranular Corrosion of Typical Stainless Steels
;;
天津大学材料学院
引用本文:

秦丽雁; 张寿禄; 宋诗哲 . 典型不锈钢晶间腐蚀敏化温度的研究[J]. 中国腐蚀与防护学报, 2006, 26(1): 1-5 .

全文: PDF(521 KB)  
摘要: 用电化学动电位再活化(EPR)法、硫酸—硫酸铜法及扫描电镜研究了典型的202、304奥氏体不锈钢与409、430铁素体不锈钢在不同敏化温度下晶间腐蚀的敏感性。结果表明,奥氏体与铁素体不锈钢敏感温度区间不同,奥氏体不锈钢诱发晶间腐蚀的敏感温度约为650℃,铁素体不锈钢诱发晶间腐蚀的敏感温度约为950℃。研究结果为正确地评判不锈钢晶间腐蚀敏感性及优化生产工艺提供了科学依据。
关键词 : 敏化处理,  不锈钢,  晶间腐蚀    
Abstract:Electrochemical potentiodynamic reactivation(EPR) test , sulphuric acid - sulphate of copper (GB4334.5-90) and scanning electron microscope were utilized in this paper to study the intergranular corrosion susceptibility of 202,304 austenitic stainless steels and 409,430 ferritic stainless steels at different sensitive heat treatment temperatures, at which intergranular corrosion will be induced. The results show that the sensitive temperature of austenitic stainless steels and that of ferritic stainless steels are different. the sensitive temperature of austenitic stainless steel is about 650℃, while that of ferritic stainless steel is around 950℃. The results provide scientific criterion for correctly evaluating the intergranular corrosion susceptibility of stainless steel and optimizing the production technology.
Key words: sensitiving heat treatment    stainless steel    intergranular corrosion
收稿日期: 2004-11-04     
ZTFLH:  TG174.3  
[1]Taboda A,Prank L.Intergranular,corrosion in nuclear system,in-tergranular corrosion in stainless alloys[M].ASTM STP656.Steigerwald R F,ed.Philadelphia,PA:ASTM,1978,85
[2]Clark W L,Romero V M,Danko J C.Detection of sensitization instainless steels using electrochemical technique[A].Corrosion/77[C].Houston,TX:NACE,1977:180
[3]Clark W L,Cowan R L,Walker W L.Comparative methods formeasuring degree of sensitization in stainless steels,in intergranularcorrosion of stainless alloys[M].ASTM,STP 656.Steigerwald RF,ed.Philadelphia,PA:ASTM,1978,99
[4]JISG0575-1999 Corrosion Test Method for Stainless Steel Sul-phuric-Acid—Sulphate of Copper[S].(JISG0575-1999不锈钢硫酸-硫酸铜腐蚀试验方法[S].)
[5]GB4335-2000 Corrosion Test Method for Stainless Steel Sulphuric-Acid—Sulphate of Copper[S].(GB4335-2000不锈钢硫酸-硫酸铜腐蚀试验方法[S].)
[6]Cihal C,Desestret A,Froment M,Wagner G H.Tests for evaluationof sensibility of stainless steels to intergranular corrosion[A].Proc.5th European Corros.Cong[C].Paris,France:European Federationon Corrosion,1973:249
[7]Qin L Y,Dong Z D.Application of electrochemical method to evalu-ate intergranular corrosion susceptibility of stainless steels[J].Taigang Science and Technology,1991,3:80-86(秦丽雁,董征东.用电化学方法测量不锈钢晶间腐蚀的敏感性[J].太钢科技,1991,3:80-86)
[8]Nathalie Lopez,Mariano Cid,Monique Puiggali,Inaki Azkarate,Al-berto Pelayo.Application of double loop potential dynamic reactiva-tion test to austenitic and duplex[J].Mater.Sci.Eng.A,1997,229(1-2):123-128
[9]Xiao J M.Metallography of Stainless Steel[M].Beijing:MetallurgyIndustry Press,1983:246~248(肖纪美.不锈钢的金属学问题[M].北京:冶金工业出版社,1983:246-248)
[1] 郑凯, 王艺陶, 王东胜, 刘伟, 蒋颖畅, 黄嵘, 常雪婷. 腐蚀-应力耦合作用对极地船用螺旋桨低碳马氏体不锈钢失效机理影响研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1452-1462.
[2] 董少阳, 刘朝坤, 李昱彤, 夏忠虎, 甘浪, 李聪, 任延杰. 高速激光熔覆NiCrAlY涂层在900 ℃空气中的高温氧化行为[J]. 中国腐蚀与防护学报, 2026, 46(5): 1463-1474.
[3] 叶海锋, 沈书成, 陈江华. 增材制造316L不锈钢在不同温度海水环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1569-1578.
[4] 何章平, 袁誉坤, 杜颖哲, 林鹏, 徐健. 在模拟电加热器过热条件下316LN奥氏体钢缝隙腐蚀行为的研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1579-1587.
[5] 刘夏城, 邹建荣, 高良文, 周龙, 谭季波, 吴欣强, 张兹瑜. 压水堆核电站不锈钢焊缝材料腐蚀疲劳模型[J]. 中国腐蚀与防护学报, 2026, 46(5): 1613-1618.
[6] 孙欣, 屈佳伟, 高子淋, 郑越, 马爱利, 姚琳, 张连民, 郑玉贵. Mn2+ 对304L和C25不锈钢在高温硝酸中腐蚀行为的协同作用机制与响应曲面模型研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1015-1030.
[7] 张晶晶, 张震, 赵占勇, 白培康, 周杰. NaHSO3 添加对445J2铁素体不锈钢在NaCl溶液中腐蚀行为影响研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1197-1206.
[8] 陆海峰, 缪强, 梁文萍, 姚志猛, 魏少翀, 陈国星. 激光清洗对不锈钢表面耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(4): 1227-1237.
[9] 王彦峰, 王流火, 孙仕达, 刘琦, 李亚梅, 王显宗. 柔直换流阀冷却系统关键材料失效与缓解措施研究进展[J]. 中国腐蚀与防护学报, 2026, 46(3): 653-662.
[10] 张新瑞, 薛宝权, 谭季波, 张兹瑜, 高军, 吴欣强. 含铝奥氏体不锈钢液态铅铋环境相容性研究进展[J]. 中国腐蚀与防护学报, 2026, 46(3): 671-679.
[11] 陈旭, 刘宇航, 郭建, 王岐山, 刘畅, 刘彬. 超级13Cr不锈钢在饱和CO2 油田采出液中的缝隙腐蚀行为[J]. 中国腐蚀与防护学报, 2026, 46(2): 523-532.
[12] 张金宇, 李欣, 张磊, 陈志华, 杜雨昕, 冯贺鑫, 张雪, 张洋鹏, 林如山, 李瑛, 戎利建. 几种17Cr系不锈钢在氯化物蒸汽中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 576-582.
[13] 兰博韬, 吴斌, 明洪亮, 王俭秋, 韩恩厚. 选区激光熔化奥氏体不锈钢高温高压水中应力腐蚀开裂行为研究进展[J]. 中国腐蚀与防护学报, 2026, 46(1): 1-14.
[14] 谷清宇, 宋雁飞, 张亮亮, 王楠, 雷晓维. 激光定向能量沉积17-4PH不锈钢钝化与点蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 103-114.
[15] 冯浩轩, 王馥丽, 李甲林, 杜瑶, 韦博鑫, 朱圣龙. SLM-316L不锈钢的高温氧化与腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 137-144.