Please wait a minute...
中国腐蚀与防护学报  2004, Vol. 24 Issue (1): 37-40     
  研究报告 本期目录 | 过刊浏览 |
HVOF镍基喷涂层在水溶液中的腐蚀行为
赵卫民;王勇;韩涛;董立先
石油大学机电工程学院材料科学与工程系
Study on the Corrosion Behavior of HVOP Sprayed NiCrBSi Coatings
Weimin Zhao;Yong Wang;Tao Han;LiXian Dong
全文: PDF(317 KB)  
摘要: 采用高速氧燃料火焰喷涂(HVOF)方法在普通碳钢表面制备了镍基合金涂层,对其组织结构进行了观察,并利用电化学方法对其在水溶液中的腐蚀行为进行研究,探讨HVOF涂层应用于水介质环境中的可能性。试验结果表明,NiCrBSi喷涂层在1mol/L NaOH溶液中表面能够形成致密钝化膜,耐碱腐蚀的性能最好。涂层在酸性溶液中的腐蚀速度大于在中性3.5%NaCl溶液中的腐蚀速度,利用冰醋酸将3.5%NaCl溶液的pH值调整到3,可以提高实验结果的重现性。酸性溶液中,只要被测试表面处于活性溶解状态,腐蚀试验重现性都能满足要求。另外,缺陷越少涂层的耐蚀性越好,减少涂层中的孔隙等缺陷是提高涂层耐蚀性的关键。
关键词 HVOF镍基合金耐蚀性显微组织    
Abstract:The nickel-based alloy powder was sprayed to a steel substrate using HVOF, and the corrosion resistance of the coatings was evaluated using electrochemical tests, so as to offer an experimental basis to expand a promising applied field of HVOF in aqueous medium. The results show that NiCrBSi coating has excellent corrosion resistance in alkali solution, because the surface can keep in a self-passivation condition. The corrosion current of the coating in sour solutions is bigger than that in 3.5%NaCl, and the corrosion caused by Cl- is serious than that caused by SO42-. The reproducibility of the test results can be improved when the 3.5%NaCl aqueous solution is acidified with acetic acid, and using a corrosive medium that keep the tested surface in an active-dissolved condition can get the same purpose. The more less the defects in the coating, the better the corrosion resistance. Improving the quality and reducing the porosity of coatings is the key to get the coatings with high corrosion resistance.
Key wordsHVOF    nickel-base alloy    corrosion resistance    microstructure
收稿日期: 2003-01-19     
ZTFLH:  TG174.442  
通讯作者: 赵卫民     E-mail: zhaowm@mail.hdpu.edu.cn

引用本文:

赵卫民; 王勇; 韩涛; 董立先 . HVOF镍基喷涂层在水溶液中的腐蚀行为[J]. 中国腐蚀与防护学报, 2004, 24(1): 37-40 .
Weimin Zhao, Yong Wang, Tao Han, LiXian Dong. Study on the Corrosion Behavior of HVOP Sprayed NiCrBSi Coatings. J Chin Soc Corr Pro, 2004, 24(1): 37-40 .

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2004/V24/I1/37

[1]EdrisH ,McCartneyDG ,SturgeonAJ.Microstructuralcharacterizationofhighvelocityoxy-fuelsprayedcoatingsofInconel625[J].J.Mater.Sci.,1997:863-872
[2]PerryJM ,NevilleA ,WilsonVA ,etal.AssessmentofthecorrosionratesandmechanismsofaWC CoCrHVOFcoatinginstaticandliquid solidimpingementsalineenvironments[J].Surf.Coat.Technol.,2001,137(1):43-51
[3]OtsuboF ,EraH ,KishitakeK .ResistancetohydrochloricacidsolutionofFe-CrMo8P 2CamorphouscoatingssprayedbyHVOFprocess[J].QuarterlyJ.Jap.Weld.Soc.,2001,19(1):54-59
[4]TuominenJ,VuoristoP ,MantylT ,etal.Improvingcorrosionpropertiesofhigh velocityoxy fuelsprayedInconel625byusingahigh powercon tinuouswaveneodymium dopedyttriumaluminumgarnetlaser[J].J.ThermalSprayTechnol.,2000:513-519
[5]LeeCH ,MinKO .EffectsofheattreatmentonthemicrostructureandpropertiesofHVOF sprayedNiCrW MoBalloycoatings[J].Surf.Coat.Technol.,2000,10:49-57
[6]RodriguezM ,StaiaM ,GilL ,etal.EffectofheattreatmentonpropertiesofnickelhardsurfacealloydepositedbyHVOF[J].Surf.Eng.,2000:415-420
[7]JiGangchang,WangYuyue,LiChangjiu,etal.Erosionofhighvelocityoxy fuelsprayedCr3C2NiCrcoatings[J].J.Xi’anJiaotongUniversity,2000,34(5):59-63
[8]NatishanPM ,LawrenceSH ,FosterRL ,etal.Saltfogcorrosionbehav iorofhigh velocityoxygen fuelthermalspraycoatingscomparedtoelec trodepositedhardchromium[J].Surf.Coat.Technol.,2000:218-223
[9]GilLinda,MarianaHStaia.MicrostructureandpropertiesofHVOFther malsprayedNiWCrBSicoatings[J].Surf.Coat.Technol.,1999:423-429
[10]DentAH ,HorlockAJ ,McCartneyDG ,etal.Corrosionbehaviorandmicrostructureofhigh velocityoxy fuelsprayednickel baseamorphous/nanocrystallinecoatings[J].J .ThermalSprayTechnol.,1999,8(3):399-404
[11]HazanJ,CoddetCh.Corrosionbehaviourinlowconcentratedsulfateso lutionofthermalspray(HVOF)zinccoatingsonsteel[J].Mater.Sci.Forum,1998:719-728
[12]HofmanR ,VreijlingMPW ,FerrariGM ,etal.Electrochemicalmeth odsforcharacterizationofthermalspraycorrosionresistantstainlesssteelcoatings[J].Mater.Sci.Forum,1998:641-654
[13]WangBQ .Dependenceoferosion corrosiononcarbide/metalmatrixproportionforHVOFCr3C2NiCrcoatings[J].Surf.Eng.,1998,14(2):165-169
[14]NevilleA ,HodgkiessT .Corrosionbehaviorandmicrostructureoftwothermalspraycoatings[J].Surf.Eng.,1996,12(4):303-312
[15]KishitakeK ,EraH ,OtsuboF .Thermal sprayedFe10Cr13P 7Camor phouscoatingspossessingexcellentcorrosionresistance[J].J.ThermalSprayTechnol.,1996,5(4):476-482
[16]ZhaoL ,LugscheiderE ,FischerA ,etal.Thermalsprayingofahighni trogenduplexaustenitic ferriticsteel[J].Surf.Coat.Technol.,2001:208-215
[17]WilliamStephenTait.AnIntroductiontoElectrochemicalCorrosionTestingforPracticingEngineersandScientists[M].Racine,Wisconsin:PairodacsPublications,1994:39
[1] 黄鹏, 高荣杰, 刘文斌, 尹续保. 盐溶液刻蚀-氟化处理制备X65管线钢镀镍超双疏表面及其耐蚀性研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 96-100.
[2] 包任, 周根树, 李宏伟. 恒电位脉冲电沉积高锡青铜耐蚀镀层工艺研究[J]. 中国腐蚀与防护学报, 2020, 40(6): 585-591.
[3] 刘海霞, 黄峰, 袁玮, 胡骞, 刘静. 690 MPa级高强贝氏体钢在模拟乡村大气中的腐蚀行为[J]. 中国腐蚀与防护学报, 2020, 40(5): 416-424.
[4] 李聪玮, 杜双明, 曾志琳, 刘二勇, 王飞虎, 马付良. 电流密度对Ni-Co-B镀层微观结构及磨蚀性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(5): 439-447.
[5] 曹京宜, 方志刚, 陈晋辉, 陈志雄, 殷文昌, 杨延格, 张伟. 5083铝合金表面单致密微弧氧化膜的制备及其性能研究[J]. 中国腐蚀与防护学报, 2020, 40(3): 251-258.
[6] 王英君, 刘洪雷, 王国军, 董凯辉, 宋影伟, 倪丁瑞. 新型高强稀土Al-Zn-Mg-Cu-Sc铝合金的阳极氧化及其抗腐蚀性能研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 131-138.
[7] 王乐,易丹青,刘会群,蒋龙,冯春. Ru对Ti-6Al-4V合金腐蚀行为的影响及机理研究[J]. 中国腐蚀与防护学报, 2020, 40(1): 25-30.
[8] 武栋才,韩培德. 中温时效处理对SAF2304双相不锈钢耐蚀性的影响[J]. 中国腐蚀与防护学报, 2020, 40(1): 51-56.
[9] 孙晓光,韩晓辉,张星爽,张志毅,李刚卿,董超芳. 超低碳奥氏体不锈钢焊接接头耐腐蚀性及环保型化学钝化工艺研究[J]. 中国腐蚀与防护学报, 2019, 39(4): 345-352.
[10] 谢冬柏,周游宇,鲁金涛,王文,朱圣龙,王福会. Al/Si对镍基合金在超临界水中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2019, 39(1): 68-76.
[11] 程多云,赵晋斌,刘波,姜城,付小倩,程学群. 高镍钢和传统耐候钢在马尔代夫严酷海洋大气环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2019, 39(1): 29-35.
[12] 蓝秀玲,刘光明,周街胜,刘志雷,彭叔森,李茂东. 有机硅/SiO2杂化溶胶改性丙烯酸树脂及性能研究[J]. 中国腐蚀与防护学报, 2018, 38(6): 601-606.
[13] 王凯, 易耀勇, 卢清华, 易江龙, 江泽新, 马金军, 张宇. 基于窄间隙焊接的热模拟峰值温度对Q690高强钢腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2018, 38(5): 447-454.
[14] 谢冬柏, 周游宇, 鲁金涛, 王文, 朱圣龙, 王福会. Cr对镍基合金在超临界水中氧化行为的影响研究[J]. 中国腐蚀与防护学报, 2018, 38(4): 358-364.
[15] 王志虎, 张菊梅, 白力静, 张国君. AZ91镁合金表面微弧氧化与化学镀铜复合处理层的微观组织与性能[J]. 中国腐蚀与防护学报, 2018, 38(4): 391-396.