Please wait a minute...
中国腐蚀与防护学报  2004, Vol. 24 Issue (1): 25-28          
  研究报告 本期目录 | 过刊浏览 |
人工神经网络模型预测不绣钢在高温水中的应力腐蚀破裂行为
郭浩;吕战鹏;冯国强;蔡旬;杨武
上海交通大学材料学院
Predicting SCC Behavior of Austenitic Stainless Steels in High Temperature Water by Artificial Neural Network
Hao Guo;Zhanpeng Lv;Guoqiang Feng;Xun Cai;Wu Yang
引用本文:

郭浩; 吕战鹏; 冯国强; 蔡旬; 杨武 . 人工神经网络模型预测不绣钢在高温水中的应力腐蚀破裂行为[J]. 中国腐蚀与防护学报, 2004, 24(1): 25-28 .
, , , , . Predicting SCC Behavior of Austenitic Stainless Steels in High Temperature Water by Artificial Neural Network[J]. J Chin Soc Corr Pro, 2004, 24(1): 25-28 .

全文: PDF(173 KB)  
摘要: 采用两种基于人工神经网络(ANN)的经验学习方法,即双层感知器(DLP)模型和Elman反馈(EF)模型,分析应力腐蚀破裂(SCC)数据,预测奥氏体不锈钢在高温水(HTW)中的SCC敏感性。对304不锈钢(SS)和316SS的两组SCC数据,DLP模型经过长时间的训练周次并不收敛,而EF模型在有限的时间内收敛到一稳定值。304SS和316SS的SCC敏感性依赖于温度(T)、溶解氧浓度(DO)、氯离子浓度([Cl-])以及电位(E)。采用EF模型,待预测样本数据被包含在训练数组里(方法Ⅰ)比不包含(方法Ⅱ)的情况有更高的预测率。用于EF模型的SCC阈值(ThV)影响预测率,当ThV≤0.6时,对304SS而言,预测率的范围大约是0.66~0.90(方法Ⅰ),0.60~0.79(方法Ⅱ);对316SS,预测率范围约为0.81~0.98(方法Ⅰ),0.78~0.90(方法Ⅱ),从预测率平均值来看,预测率服从正态分布,0.5应为最佳阈值。EF模型对定性预测ASS在高温水中的SCC行为有较高的预报率,是一个很有用的工具。
关键词 : 应力腐蚀破裂,  人工神经网络,  304SS,  316SS,  高    
Abstract:Two kinds of empirical learning methods based on artificial neural network(ANN),i.e., double layer perceptron(DLP) model and Elman feedback(EF) model,have been used to analyze SCC data and predict the SCC susceptibitlity of austenitic stainless steels in high temperature water(HTW). The results indicated that DLP model could not converge after long training epochs while EF model could reach a steady value within limited training epochs for the SCC data of stainless steels(SS).The SCC susceptibility fo 304SS and 316SS in HTW depends on the parameters such as temperature(T), dissolved O2 content(DO), chloride ion content ([Cl-]) and electrode potential(E). The threshold value(ThV) for SCC used in the EF model affected the prediction ratios. For THV<=0.6, the ranges of prediction ratio were ca.0.66-0.90for method Ⅰ(including the data to be predicted) and 0.60~0.79 for method Ⅱ(excluding the data to be predicted) for 304SS, ca.0.81~0.98 for method Ⅰ and 0.78~0.90 for method Ⅱ for 316SS. The curves of mean value of prediction ratios show that the prediction ratios have the characteristics of normal distribution and the best ThV is 0.5. The EF model is a very useful tool for qualitatively predicting the SCC behaviour of austenitic stainless steels in HTW.
Key words: stress corrosion cracking    artificial neural network    304SS steel    316SS steel    high temperature water    e
收稿日期: 2003-07-08     
ZTFLH:  TG172.9/TP183  
[1]ZhangLM .ModelsandApplicationsofArtificialNeuralNetworks[M].Shanghai:FudanUniversityPress,1993(张立明,人工神经网络的模型及其应用[M].上海:复旦大学出版社,1993)
[2]LouST ,ShiY .SystemAnalysisandDesignBasedonMETLAB -neuralNetworks[M].Xi′an:Xi′anElectronicsScienceandTechnologyUniver sityPress,1998(楼顺天,施阳.基于MATLAB的系统分析与设计———神经网络[M].西安:西安电子科学技术大学出版社,1998)
[3]YangW ,ZhangM ,ZhaoG ,CongletonJ .AcomparisonofU -bendandslowstrainrateprocedureforassessingtheSCCresistanceoftype304stainlesssteelinhigh-temperaturewater[J].Corrosion,1991,47(4):226-233
[4]GordonBarryM .Theeffectofchlorideandoxygenonthestresscorrosioncrackingofstainlesssteels:reviewofliterature[J].MaterialsPerfor mance,1980,19(4):29-37
[5]SturrockCP ,BogaertsWF .Empiricallearninginvestigationsofthestresscorrosioncrackingofausteniticstainlesssteelsinhigh-tempera tureaqueousenvironments[J].Corrosion,1997,53(4):333-343
[6]ClarkeWL ,GordonGM .Investigationofstresscorrosioncrackingsus ceptibilityofFe-Ni-Cralloysinnuclearreactorwaterenvironments[J].Corrosion,1973,29(1):1-12
[7]HishidaMamoru,NakadaHiroshi.Constantstrainratetestingoftype304stainlesssteelinhightemperaturewater-partⅡ:aninvestigationofthechlorideeffectonstresscorrosioncracking[J].Corrosion,1977,33(11):403-407
[8]YangWu,ZhaoGuozhen,ZhangMeijie,CongletonJohn.AnAESinves tigationofthesurfacefilmsformedonstresscorrosiontestspecimensoftype304stainlesssteelinhightemperaturewater[J].Corros.Sci.,1992,33(1):89-102
[9]CongletonJ,BerrisfordRA ,YangW .Stresscorrosioncrackingofsensi tizedtype304stainlesssteelindopedhigh-temperaturewater[J].Cor rosion,1995,51(12):901-910
[10]NuemannPD ,GriessJC .Stresscorrosioncrackingoftype347stainlesssteelandotheralloysinhightemperaturewater[J].Corrosion,1963,19:345t-353t
[11]CongletonJ,YangW .Theeffectofappliedpotentialonthestresscorro sioncrackingofsensitizedtype316stainlesssteelinhightemperaturewater[J].Corros.Sci.,1995,37(3):429-444
[12]AndrensenPL .Environmentallyassistedgrowthrateresponseofnon sensitizedAISI316gradestainlesssteelsinhightemperaturewater[J].Corrosion,1988,44(7):450-460
[13]YangW ,CongletonJ,Kohneh-ChariO ,SajdlP .Thestrainforstresscorrosioncrackinitiationintype316stainlesssteelinhightemperaturewater[J].Corros.Sci.,1992,33(5):735-750
[14]YangW ,ZhuXY ,LiLX ,HuaHZ ,YangHG .Stresscorrosioncrack ingofsensitizedtype316stainlesssteelinhightemperaturewater[J].J.Chin.Soc.Corros.Prot.,1993,13(2):126-136(杨武,朱锡英,李丽霞,华慧中,杨鸿根.敏化316不锈钢在高温水中的应力腐蚀破裂[J].中国腐蚀与防护学报,1993,13(2):126-136)
[15]CongletonJ,ShihHC ,ShojiT ,ParkinsRN .Thestresscorrosioncrack ingoftype316stainlesssteelinoxygenatedandchlorinatedhightem peraturewater[J].Corros.Sci.,1985,25(8/9):769-788
[16]CongletonJ,ZhengW ,HuaH .Stresscorrosioncrackingofannealedtype316stainlesssteelinhightemperaturewater[J].Corrosion,1990,46(8):621-627
[1] 谢敬礼, 王友志, 乔书振, 牛佳雨, 郝龙, 曹胜飞, 王俭秋. 高放废物地质处置库近场环境中碳钢腐蚀产物演化研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1343-1352.
[2] 白玉洁, 翟晓亮, 崔中雨. 高原冻土水-热-力多场耦合环境及其对材料损伤行为影响研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1389-1399.
[3] 曾崎, 虞文军, 门向南, 冯保净, 杨耀, 朱凯, 葛玉麟, 应韬, 曾小勤. 高强耐蚀稀土镁合金研究进展[J]. 中国腐蚀与防护学报, 2026, 46(5): 1415-1424.
[4] 董少阳, 刘朝坤, 李昱彤, 夏忠虎, 甘浪, 李聪, 任延杰. 高速激光熔覆NiCrAlY涂层在900 ℃空气中的高温氧化行为[J]. 中国腐蚀与防护学报, 2026, 46(5): 1463-1474.
[5] 曹天慧, 杨砚淇, 刘雨薇, 吴磊, 郭泉忠, 贾志刚, 曹公望, 汪川. 23MnNiMoCr54钢在不同pH的模拟高矿化水中腐蚀机理研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1537-1548.
[6] 赵先锐, 戴中国, 李战江, 徐育烺, 张会霞, 李旺. 添加Y、Hf对AlCoCrFeNi高熵合金涂层在NaCl溶液中的腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(5): 1549-1559.
[7] 刘夏城, 邹建荣, 高良文, 周龙, 谭季波, 吴欣强, 张兹瑜. 压水堆核电站不锈钢焊缝材料腐蚀疲劳模型[J]. 中国腐蚀与防护学报, 2026, 46(5): 1613-1618.
[8] 杨鑫, 车欣, 卢玉章, 黄亚奇, 王栋, 申健. 一种低Re二代单晶高温合金的热腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1159-1168.
[9] 孔耀, 黄奕欣, 周木兰, 曾光, 宁华清, 申越, 刘宗德. 激光增材制造Ni-Cr-Mo合金在KCl-K2SO4 混合盐中的高温腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1207-1217.
[10] 周吉, 帅若辉, 杨继凯, 娄丽艳, 刘伊, 鲁俊豪, 蔡志海, 王海斗, 李成新. 21CrMoV钢表面激光熔覆Stellite合金涂层的组织及高温氧化性能[J]. 中国腐蚀与防护学报, 2026, 46(4): 1269-1278.
[11] 李蕊, 俞利鑫, 崔宇, 刘叡, 孟凡帝, 刘莉, 王福会. Ti60合金在600 ℃混合盐雾环境中腐蚀行为的研究[J]. 中国腐蚀与防护学报, 2026, 46(3): 798-806.
[12] 赵密锋, 胡芳婷, 刘艳明, 宋文文, 谢俊峰, 吕祥鸿, 代盼, 胡航波. 含氧注气驱高Ca2+ 浓度工况下C110钢腐蚀产物膜演变及腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(3): 821-832.
[13] 王峰, 蒋一鸣, 张彩云, 李帅, 鲍泽斌. 燃气轮机用动叶的组织退化及涂层修复研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 461-470.
[14] 胡聪怀, 周雯, 徐正兴, 张弦, 张莉芹, 张开广, 许可, 吴开明. 高强度低合金厚钢板在模拟海洋大气环境中的腐蚀行为[J]. 中国腐蚀与防护学报, 2026, 46(2): 471-482.
[15] 杜乾, 马泽林, 恽迪, 顾龙, 郭少强. Fe离子辐照对ODS钢在饱和氧液态铅中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2026, 46(2): 567-575.