|
|
|
| Cu-Ni合金管海水冲刷腐蚀研究现状及展望 |
魏木孟( ),杨博均,刘洋洋,王孝平,姚敬华,高灵清 |
| 中国船舶重工集团公司第七二五研究所厦门材料研究院 海洋腐蚀与防护国防科技重点实验室 厦门 361006 |
|
| Research Progress and Prospect on Erosion-corrosion of Cu-Ni Alloy Pipe in Seawater |
| Mumeng WEI(),Bojun YANG,Yangyang LIU,Xiaoping WANG,Jinghua YAO,Lingqing GAO |
| State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Xiamen 361006, China |
引用本文:
魏木孟,杨博均,刘洋洋,王孝平,姚敬华,高灵清. Cu-Ni合金管海水冲刷腐蚀研究现状及展望[J]. 中国腐蚀与防护学报, 2016, 36(6): 513-521.
Mumeng WEI,
Bojun YANG,
Yangyang LIU,
Xiaoping WANG,
Jinghua YAO,
Lingqing GAO.
Research Progress and Prospect on Erosion-corrosion of Cu-Ni Alloy Pipe in Seawater. Journal of Chinese Society for Corrosion and protection, 2016, 36(6): 513-521.
链接本文:
https://www.jcscp.org/CN/10.11902/1005.4537.2016.123
或
https://www.jcscp.org/CN/Y2016/V36/I6/513
|
| [1] | Fujiwara K, Zhang L Y.The material selection of seawater pipeline[J]. Foreign Ship Technol.(Mater. Class), 1981, 12: 13 | | [1] | (藤原和雄, 张丽英. 海水管道的材料选择[J]. 国外舰船技术 (材料类), 1981, 12: 13) | | [2] | Gu C X, Zhang X L, Zhao X B.Influential factors of the copper alloy corrosion and research progress[J]. Ship Eng., 2014, 36(3): 10 | | [2] | (顾彩香, 张小磊, 赵向博. 铜合金腐蚀的影响因素及研究状况[J]. 船舶工程, 2014, 36(3): 10) | | [3] | Zhang Q L.Analysis on corrosion cause of B30 copper nickel alloy pipe for ship[J]. Develop. Appl. Mater., 1986, 1: 22 | | [3] | (张启林. 船用B30铜镍合金管材腐蚀原因分析[J]. 材料开发与应用, 1986, 1: 22) | | [4] | Yang H, Yang R.Failure analysis of leaking of seawater tube in a ship[J]. Develop. Appl. Mater., 2016, (3): 28 | | [4] | (杨辉, 杨瑞. 某船海水管路泄失效原因分析[J]. 材料开发与应用, 2016, (3): 28) | | [5] | Shen H, Gao F, Zhang G G.Material selection and corrosion protection measures of the marine seawater piping[J]. Ship Eng., 2002, (4): 43 | | [5] | (沈宏, 高峰, 张关根等. 舰船海水管系选材及防腐对策[J]. 船舶工程, 2002, (4): 43) | | [6] | Stack M M, Corlett N, Turgoose S.Some thoughts on modeling the effects of oxygen and particle concentration on the erosion-corrosion of steels in aqueous slurries[J]. Wear, 2003, 255(1-6): 225 | | [7] | Neville A, Reza F, Chiovelli S, et al.Erosion-corrosion behavior of WC-based MMCs in liquid-solid slurries[J]. Wear, 2005, 259(1-6): 181 | | [8] | Tian B R, Cheng Y F.Electrochemical corrosion behavior of X-65 steel in the simulated oil sand slurry I: Effects of hydrodynamic condition[J]. Corros. Sci., 2008, 50(3): 773 | | [9] | Niu L, Cheng Y F.Synergistic effects of fluid flow and sand particles on erosion-corrosion of aluminum in ethyleneglycol-water solutions[J]. Wear, 2008, 265(3/4): 367 | | [10] | Hodgkiess T, Neville A, Shrestha S. Electro chemical and mechanical in teractions during erosion-corrosion of a high-velocity oxy-fuel coating and a stainless steel [J]. Wear, 1999, 233-235: 623 | | [11] | Burstein G T, Sasaki K.Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel[J]. Wear, 2000, 240(1/2): 80 | | [12] | Zhang G A, Xu L Y, Cheng Y F.Investigation of erosion-corrosion of 3003 aluminum alloy in ethyleneglycol-water solution by impingement jet system[J]. Corros. Sci., 2009, 51(2): 283 | | [13] | Reyes M, Neville A.Degradation mechanisms of Co-based alloy and WC metal-matrix composites for drilling tools off shore[J]. Wear, 2003, 255(7-12): 1143 | | [14] | Jana B D, Stack M M.Modelling impact angle effects on erosion-corrosion of pure metals: Construction of materials performance maps[J]. Wear, 2005, 259(1-6): 243 | | [15] | Niu L, Cheng Y F.Electro chemical characterization of metastable pitting of 3003 aluminum alloy in ethyleneglycol-water solution[J]. J. Mater. Sci., 2007, 42(20): 8613 | | [16] | Neville A, Hodgkiess T, Dallas J T. A study of the erosion-corrosion behavior of engineering steels for marine pumping applications [J]. Wear, 1995, 186/187: 497 | | [17] | Flores J F, Neville A, Kapur N, et al.An experimental study of the erosion-corrosion behavior of plasma transferred arc MMCs[J]. Wear, 2009, 267(1-4): 213 | | [18] | Zhang D W, Zhang X P.Laser cladding of stainless steel with Ni-Cr3C2 and Ni-WC for improving erosive-corrosive wear performance[J]. Surf. Coat. Technol., 2005, 190(2/3): 212 | | [19] | Liu R, Yao M X, Patnaik P C, et al.An improved wear- resistant PTA hardfacing: VWC/stellite 21[J]. J. Compos. Mater., 2006, 40(2): 2203 | | [20] | Tian X L, Lin Y Z, Liu J J, et al.Study on the erosion-corrosion mechanism of carbon steel in liquid / solid dual phase pipe flow[J]. J. Beijing Univ. Chem. Technol.(Nat. Sci. Ed.), 2003, 30(5): 40 | | [20] | (田兴玲, 林玉珍, 刘景军等. 碳钢在液/固双相管流中的磨损腐蚀机理研究[J]. 北京化工大学学报 (自然科学版), 2003, 30(5):40) | | [21] | Yang Y, Cheng Y F. Parametric effects on the erosion-corrosion rate and mechanism of carbon steel pipes in oil sands slurry [J]. Wear, 2012, 276/277: 141 | | [22] | Xu Z.Research on the erosion-corrosion behavior of P110 steel in liquid-solid two-phase flow [D]. Daqing: Northeast Petroleum University, 2011 | | [22] | (徐哲. 液固两相流条件下P110钢冲刷腐蚀研究 [D]. 大庆: 东北石油大学, 2011) | | [23] | Hu Z W, Liu J G, Li Z L, et al.Research status and prospect of liquid solid two phase flow on erosion-corrosion of metal materials[J]. Mater. Prot., 2015, 48(10): 30 | | [23] | (胡宗武, 刘建国, 李自力等. 液固两相流对金属材料冲刷腐蚀的研究现状及展望[J]. 材料保护, 2015, 48(10): 30) | | [24] | Du J.Erosion-corrosion behavior of copper and 90/10 Cu-Ni Alloy in flowing seawater [D]. Qingdao: Ocean University of China, 2007 | | [24] | (杜娟. TUP紫铜及B10铜镍合金流动海水冲刷腐蚀行为研究 [D]. 青岛: 中国海洋大学, 2007) | | [25] | Li D.Erosion-corrosion behavior of copper in artificial seawater [D]. Harbin: Harbin Engineering University, 2013 | | [25] | (李多. 紫铜在人工海水中的冲刷腐蚀行为研究 [D]. 哈尔滨: 哈尔滨工程大学, 2013) | | [26] | Yin C J.Erosion-corrosion of 90/10 alloy in artificial seawater [D]. Harbin: Harbin Engineering University, 2012 | | [26] | (尹承军. B10合金在模拟海水中的冲刷腐蚀研究 [D]. 哈尔滨: 哈尔滨工程大学, 2012) | | [27] | Zeng F W.Erosion-corrosion behavior of 70/30Cu-Ni alloy in artificial seawater [D]. Harbin: Harbin Engineering University, 2012 | | [27] | (曾凡伟. B30铜镍合金人工海水中的冲刷腐蚀行为研究 [D]. 哈尔滨: 哈尔滨工程大学, 2012) | | [28] | Li Q, Tang X, Li Y.Progress in research methods for erosion-corrosion[J]. J. Chin. Soc. Corros. Prot., 2014, 34(5): 399 | | [28] | (李强, 唐晓, 李焰. 冲刷腐蚀研究方法进展[J]. 中国腐蚀与防护学报, 2014, 34(5): 399) | | [29] | Burstein G T, Sasaki K.Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel[J]. Wear, 2000, 240(1/2): 80 | | [30] | Frederic F, Thierry F, Jean G, et al.Acoustic emission study of active passive transitions during carbon steel erosion corrosion in concentrated sulfuric acid[J]. Corros. Sci., 2002, 44(7): 1529 | | [31] | Mohamed S, Ibrahim H, Hany M, et al.Monitoring erosion-corrosion in carbon steel elbow using acoustic emission technique. 30Th european conference on acoustic emission testing [D]. Granada: University of Granada, 2012: 231 | | [32] | Ukpai J I, Barker R, Hu X M, et al.Exploring the erosive wear of X65 carbon steel by acoustic emission method[J]. Wear, 2013, 301(1/2): 370 | | [33] | Ukpai J I, Barker R, Hu X.Determination of particle impacts and impact energy in the erosion of X65 carbon steel using acoustic emission technique[J]. Tribol. Int., 2013, 65: 161 | | [34] | Ferng Y M, Lin B H.Predicting the wall thing engendered by erosion-corrosion using CFD methodology[J]. Nucl. Eng. Des., 2010,240: 2836 | | [35] | Davis C, Frawley P.Modelling of erosion-corrosion in practical geometries[J]. Corros. Sci., 2009, 51: 769 | | [36] | Bozzini B, Ricotti M E, Boniardi M, et al.Evaluation of erosion-corrosion in multiphase flow via CFD and experimental analysis[J]. Wear, 2003, 255: 237 | | [37] | Hu X M, Barker R, Neville A, et al.Case study on erosion-corrosion degradation of pipework located on an offshore oil and gas facility[J]. Wear, 2011, 271: 1295 | | [38] | Lin Y Z, Liu J J, Yong X Y, et al.Application of numerical method to study of flow-induced corrosion-(I) metal corrosion under laminar condition[J]. J. Chin. Soc. Corros. Prot., 1999, 19(1): 1 | | [38] | (林玉珍, 刘景军, 雍兴跃等. 数值计算法在流体腐蚀研究中的应用-(I) 层流条件下金属的腐蚀[J]. 中国腐蚀与防护学报, 1999, 19(1): 1) | | [39] | Yong X Y, Liu J J, Lin Y Z, et al.Application of numerical method to study of flow-induced corrosion-(II) metal corrosion under turbulent condition[J]. J. Chin. Soc. Corros. Prot., 1999, 19(1): 8 | | [39] | (雍兴跃, 刘景军, 林玉珍等. 数值计算法在流体腐蚀研究中的应用-(II) 湍流条件下金属的腐蚀[J]. 中国腐蚀与防护学报, 1999, 19(1): 8) | | [40] | Liu J J, Lin Y Z, Tian X L, et al.Numerical simulation of flow induced corrosion of carbon steel in liquid/solid two-phase flow system[J]. J. Chem. Ind. Eng., 2004, 55(2): 231 | | [40] | (刘景军, 林玉珍, 田兴玲等. 碳钢在固/液两相流条件下流动腐蚀的数值模拟[J]. 化工学报, 2004, 55(2): 231) | | [41] | Liu J J, Lin Y Z, Tian X L, et al.Numerical simulation of flow induced corrosion of duplex stainless steel in liquid/particle two-phase in-pipe flow[J]. J. Chem. Ind. Eng., 2004, 55(3): 409 | | [41] | (刘景军, 林玉珍, 田兴玲等. 双相不锈钢管固/液两相流动腐蚀的数值模拟[J]. 化工学报, 2004, 55(3): 409) | | [42] | Yong X Y, Lin Y Z.Progress in study on flow-induced[J]. Corros. Sci. Prot. Technol., 2002, 14(1): 32 | | [42] | (雍兴跃, 林玉珍. 流动腐蚀研究的新进展[J]. 腐蚀科学与防护技术, 2002, 14(1): 32) | | [43] | Stack M M, Abdelrahman S M, Jana B D.A new methodology for medelling erosion-corrosion regimes on real surfaces: Gliding down the galvanic series for a range of metal-corrosion systems[J]. Wear, 2010, 268: 533 | | [44] | Neville A, Hodgkiess T, Dallas J T. A study of the erosion-corrosion behavior of engineering steels for marine pumping applications [J]. Wear, 1995, 186/187: 497 | | [45] | Neville A, Hodgkiess T.Study of effect of liquid corrosivity in liquid-solid impingement on cast iron and austenitic stainless steel[J]. Brit. Corros. J., 1997, 32(3): 197 | | [46] | Zhang A F, Wang Y Y, Xing J D, et al.Synergistic effects between erosion and corrosion of two coatings and two steels in two-phase flow[J]. Acta Metall. Sin., 2004, 40(4): 411 | | [46] | (张安峰, 王豫跃, 邢建东等. 两种涂层和两种钢在液/固两相流中冲刷与腐蚀的交互作用[J]. 金属学报, 2004, 40(4): 411) | | [47] | Tang X, Xu L Y, Cheng Y F.Electrochemical corrosion behavior of X-65 steel in the simulated oil-sand slurry. II: Synergism of erosion and corrosion[J]. Corros. Sci., 2008, 50(5): 1469 | | [48] | Chen J, Li Q A, Zhang Q, et al.Sliding wear-corrosion performance of AISI 316 stainless steel against alumina in artificial seawater[J]. J. Chin. Soc. Corros. Prot., 2014, 34(5): 433 | | [48] | (陈君, 李全安, 张清等. AISI 316不锈钢腐蚀磨损交互作用的研究[J]. 中国腐蚀与防护学报, 2014, 34(5): 433) | | [49] | Zeng L, Zhang G A, Guo X P.Erosion -corrosion at different locations of X65 carbon steel elbow[J]. Corros. Sci., 2014, 85(8): 318 | | [50] | Stack M M, Abd El-Badia T M. Mapping erosion-corrosion of WC/Co-Cr based composite coatings: particle velocity and applied potential effects[J]. Surf. Coat. Technol., 2006, 201(3/4): 1335 | | [51] | Aribo S, Barker R, Hu X M, et al.Erosion -corrosion behaviour of lean duplex stainless steels in 3.5%NaCl solution[J]. Wear, 2012, 302(1/2): 1602 | | [52] | Abedini M, Ghasemi H M.Synergistic erosion-corrosion behavior of Al -brass alloy at various impingement angles[J]. Wear, 2014, 319(1/2): 49 | | [53] | Zheng Y G, Yao Z M, Zhang Y S, et al.Erosion-corrosion synergism and erosion-corrosion resistant alloy development[J]. Acta Metall. Sin., 2000, 36(1): 51 | | [53] | (郑玉贵, 姚治铭, 张玉生等. 冲刷与腐蚀的交互作用与耐冲刷腐蚀合金设计[J]. 金属学报, 2000, 36(1): 51) | | [54] | Malka R, Nesic S, Gulino D A.Erosion-corrosion and synergistic effects in disturbed liquid-particle flow[J]. Wear, 2007, 262(7/8): 791 | | [55] | Stack M M, Abdulrahman G H.Mapping erosion-corrosion of carbon steel in oil-water solutions: Effects of velocity and applied potential[J]. Wear, 2012, 274: 401 | | [56] | Telfer C G, Stack M M, Jana B D.Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries[J]. Tribol. Int., 2012, 53: 35 | | [57] | Crousier J, Beccaria A M.Behaviours of Cu-Ni alloys in natural sea water and NaCl solution[J]. Werkst. Korros., 1990, 41: 185 | | [58] | Sewart W C, La Q F L. Corrosion resisting characteristics of iron modified 90: 10 copper-nickel alloy[J]. Corrosion, 1952, 8: 259 | | [59] | Popplewell J M, Hart R J, Ford J A.The Effect of iron on the corrosion characteristics of 90-10 copper-nickel in quiesent 3.5%NaCl solution[J]. Corros. Sci., 1973, 13: 295 | | [60] | Efird K D.The synergistic effect of Ni and Fe on the sea water corrosion of copper alloys[J]. Corrosion, 1977, 33(10): 347 | | [61] | North R F, Pryor M J.The influence of corrosion product structrue on the corrosion rate of Cu-Ni alloys[J]. Corros. Sci., 1970, 10: 297 | | [62] | Wang J, Jiang X, Li S.Microstructure and corrosion behavior of 70Cu-30Ni weld pipe[J]. Trans. Nonferrous Met. Soc. China, 1995, 5: 88 | | [63] | Wang J H, Jiang X X, Li S Z.Effect of trace Boron on microstructure and properties of 70Cu-30Ni alloy[J]. Acta Metall. Sin., 1995, 31(6): 266 | | [63] | (王吉会, 姜晓霞, 李诗卓. 微量硼对70Cu-30Ni合金组织和性能的影响[J]. 金属学报, 1995, 31(6): 266) | | [64] | Zhu X L, Lin L Y, Xu J.Corrosion of copper alloy in seawater environment and the main affecting factors[J]. Chin. J. Nonferrous Met., 1998, 8(suppl.1): 210 | | [64] | (朱小龙, 林乐耘, 徐杰. 铜合金在海水环境中的腐蚀规律及主要影响因素[J]. 中国有色金属学报, 1998, 8(增刊1): 210) | | [65] | Gat N, Tabakoff W.Effects of temperature on the behavior of metals under erosion by particulate matter[J]. J. Test. Eval., 1980, 8: 177 | | [66] | Pehkonen S O, Palit A, Zhang X.Effect of specific water quality parameters on copper corrosion[J]. Corrosion, 2002, 58(2): 156 | | [67] | Efird K D.Potential-pH diagrams for 90-10 and 70-30 Cu-Ni in sea water[J]. Corrosion, 1975, 31(3): 77 | | [68] | Chi C Y, Xu L K, Lin C G, et al.Influenceof pH on electrochemical behavior of 70/30 Cu-Ni alloy[J]. Equip. Environ. Eng., 2009, 6(3): 38 | | [68] | (迟长云, 许立坤, 蔺存国等. pH值变化对B30铜镍合金腐蚀电化学行为的影响[J]. 装备环境工程, 2009, 6(3): 38) | | [69] | Chen H Y, Zhu Y L, Shu C.Research on the selective corrosion of BFe30-1-1 alloy in NaCl solution[J]. Surf. Technol., 2005, 34(6): 14 | | [69] | (陈海燕, 朱有兰, 舒畅. 铜镍合金BFe30-1-1在NaCl溶液中的腐蚀行为[J]. 表面技术, 2005, 34(6): 14) | | [70] | Luo Z Q, Xin B L, Zhang W W, et al.Effect of pH value on the corrosion of Cu-17Ni-3Al-X wear resistant cast copper alloy[J]. J. South China Univ. Technol.(Nat. Sci. Ed.), 2011, 39(11): 125 | | [70] | (罗宗强, 辛保亮, 张卫文等. pH值对Cu-17Ni-3Al-X耐磨铸造铜合金腐蚀的影响[J]. 华南理工大学学报 (自然科学版), 2011, 39(11): 125) | | [71] | Zheng Y G, Yao Z M, Ke W.Review on the effects of hydrodynamic factors on erosion-corrosion[J]. Corros. Sci. Prot. Technol., 2000, 12(1): 36 | | [71] | (郑玉贵, 姚治铭, 柯伟. 流体力学因素对冲刷腐蚀的影响机制[J]. 腐蚀科学与防护技术, 2000, 12(1): 36) | | [72] | Lu S L, Zhao G X, Wang X H, et al.Analysis of downhole premium connection tubing corrosion[J]. Corros. Prot., 2005, 26(4): 179 | | [72] | (吕拴录, 赵国仙, 王新虎等. 特殊螺纹接头油管腐蚀原因分析[J]. 腐蚀与防护, 2005, 26(4): 179) | | [73] | Pang J F, Wang L Q, Yang J, et al.CFD simulation and erosion prediction for the flow influence of inserted component of pipes[J]. Energy Eng., 2005, 1(2): 10 | | [73] | (庞剑锋, 王乐勤, 杨健等. 石油管道插入构件流场的CFD模拟及冲蚀预测[J]. 能源工程, 2005, 1(2): 10) | | [74] | Zhu X L.The influence of deformation and heat treatment on the corrosion of 70Cu-30Ni alloy in seawater [D]. Harbin: Harbin Institute of Technology, 1996 | | [74] | (朱小龙. 形变及热处理对70Cu-30Ni合金海水腐蚀的影响 [D].哈尔滨: 哈尔滨工业大学, 1996) | | [75] | Macdonald D D, Syrett B C, Wing S S.The Corrosion of Cu-Ni alloys 706 and 715 in flowing sea water II. Effect of dissolved sulfide[J]. Corrosion, 1979, 35(8): 367 | | [76] | de Sanchez S R, Schiffrin D J. The use of high speed rotating disc electrodes for the study of erosion-corrosion of copper base in sea water[J]. Corros. Sci., 1988, 27: 141 | | [77] | Efird K D.The synergistic effect of Ni and Fe on the sea water corrosion of copper alloys[J]. Corrosion, 1977, 33(10): 347 | | [78] | Tuthill A H.Guidelines for the use of copper alloys in sea water[J]. Mater. Perform., 1987, 26: 47 | | [79] | Bianchi G, Fiori G, Mazza F."Horse Shoe" corrosion of copper alloy in flowing sea water: Mechannsim and possibility of cathodic protection of condenser tubes in power station corrosion[J]. Corrosion, 1978, 34: 396 | | [80] | Perkins J, Graham K J, Storm G A, et al.Flow effects on corrosion of galvanic couples in sea water[J]. Corrosion, 1979, 35: 23 | | [81] | Syrett B C, Wing S S.Effect of flow on corrosion of copper-nickel alloys in aerated sea water and in sulfide-polluted sea water[J]. Corrosion, 1980, 36(2): 73 | | [82] | Finnie I, Stevick G R, Ridgely J R.The influence of impingement angle on the erosion of ductile metals by angular abrasive particles[J]. Wear, 1992, 152(1): 91 | | [83] | Tang X, Xu L Y, Cheng Y F.Electrochemical corrosion behavior of X-65 steel in the simulated oil-sand slurry. II: Synergism of erosion and corrosion[J]. Corros. Sci., 2008, 50(5): 1469 | | [84] | Zhu J, Zhang Q B, Chen Y, et al.Progress of study on erosion-corrosion[J]. J. Chin. Soc. Corros. Prot., 2014, 34(3): 199 | | [84] | (朱娟, 张乔斌, 陈宇等. 冲刷腐蚀的研究现状[J]. 中国腐蚀与防护学报, 2014, 34(3): 199) | | [85] | Sasaki K, Burstein G T.The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential[J]. Corros. Sci., 1996, 38(12): 2111 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
