Please wait a minute...
中国腐蚀与防护学报  2007, Vol. 27 Issue (2): 124-128          
  综述 本期目录 | 过刊浏览 |
18-8奥氏体不锈钢的晶间腐蚀
陈世波;王晓波
四川理工学院
INTERGRANULAR CORROSION OF 18-8 AUSTENITIC STAINLESS STEEL
;
四川理工学院
引用本文:

陈世波; 王晓波 . 18-8奥氏体不锈钢的晶间腐蚀[J]. 中国腐蚀与防护学报, 2007, 27(2): 124-128 .
, . INTERGRANULAR CORROSION OF 18-8 AUSTENITIC STAINLESS STEEL[J]. J Chin Soc Corr Pro, 2007, 27(2): 124-128 .

全文: PDF(887 KB)  
摘要: 介绍了奥氏体不锈钢晶间腐蚀的机理,讨论了C、Cr、N等元素以及加热时间、温度、冷却速度和焊接等工艺条件对晶间腐蚀的影响,并提出了相应的预防措施.
关键词 : 不锈钢,  晶间腐蚀    
Abstract:This paper introduced the mechanisms of intergranular corrosion(IGC)of 18-8 austenitic stainless steel.Some process factors affecting the IGC are discussed as wel1,in which carbon,chromium and nitrogen etc in alloys and hot working,casting,welding etc were considered.The IGC prevention methods of 18-8 austenitic stainless steel are discussed.
Key words: stainless steel    intergranular corrosion
收稿日期: 2006-06-13     
ZTFLH:  TG157  
[1]Zhang D K.Localized Corrosion of Stainless Steel[M].Beijing:Sci-ence Press,1982(张德康.不锈钢局部腐蚀[M].北京:科学出版社,1982)
[2]Zhu R Z.Metal Erosion Science[M].Beijing:Metallurgy IndustryPress,1989(朱日彰等.金属腐蚀学[M].北京:冶金工业出版社,1989)
[3]He Y D.Corrosion and Protection of the Materials[M].Beijing:En-gineering Industry Press,2005(何业东等.材料腐蚀与防护概论[M].北京:机械工业出版社,2005)
[4]Wei B M.Fundamentals and Applications of Metals Corrosion[M].Beijing:Chemistry Industry Press,1984(魏宝明.金属腐蚀理论及应用[M].北京:化学工业出版社,1984)
[5]Clark W L,Romero V M,Danko J C.Detection of sensitization instainless steels using electrochemical technique[A].Corrosion/77[C].Houston,TX:NACE,1977
[6]Clark WL,Cowan R L,Walker WL.Comparative methods for meas-uring degree of sensitization in stainless steels,in intergranular corro-sion of stainless alloys[M].ASTM,STP 656.Steigerwald R F,ed.Philadelphia,PA:ASTM,1978
[7]Wang R B.The reason of18-8 austenitic stainless steel cankered[J].Hardware Sci.Technol.,2002,30(3):10-12(王荣滨.18-8型奥氏体不锈钢的晶间腐蚀原因分析[J].五金科技,2002,30(3):10-12)
[8]Li J M.Austenite stainless steel intergranular corrosion&protection[J].Phosphate&Compound Fertilizer,1999,14(3):73-75(李俊梅.奥氏体不锈钢的晶间腐蚀及保护[J].磷肥与复肥,1999,14(3):73-75)
[9]Zheng HS.Reasearch&preventing on corroding between the crys-talline substances problem of austenite stainless steel[J].Mechani-cal&Electrical Engineering Technology,2004,33(1):46-47(郑海生.奥氏体不锈钢晶间腐蚀问题的研究及防止[J].机电工程技术,2004,33(1):46-47)
[10]Luo H,Gong M.On intergranular corrosion of austenitic stainlesssteel[J].Corros.Sci.Prot.Technol.,2006,18(5):357-360(罗宏,龚敏.奥氏体不锈钢的晶间腐蚀[J].腐蚀科学与防护技术,2006,18(5):357-360)
[11]Torres F J.Corrosion behavior of sensitized duplex stainless steel[J].Bio-medical Mater.Eng.,1998,(8):25-27
[12]Cihal C,Desestret A,Froment M,et al.Tests for evaluation of sensi-bility of stainless steels to intergranular corrosion[A].Proc.5th Eu-ropean Corros.Cong[C].Paris,France:European Federation onCorrosion,1973,249
[13]Huang J,Liu X G.Survey stainless steel grain-boundary corrosionsensitivity using electrochemical potentiokinetic reactivation[J].Corros.Sci.Prot.Technol.,1992,(4):242-244(黄?,刘小光等.电化学动电位再活化法评定不锈钢晶间腐蚀敏感性的研究[J].腐蚀科学与防护技术,1992,(4):242-244)
[14]Methods for inhibiting intergranular corrosion of metal surfaces[P].U.S Pat,20040086419,2002
[15]HwangE R,KangS G.Intergranular corrosion of stainless steel in mol-ten carbonate salt[J].J.Mater.Sci.Lett.,1997,(16):1387-1388
[16]Ruan Y Z,Zhang Z C,Tu F M,et al.Intergranular attack behaviorof 316 type stainless steel[J].Phys.Exam.Test.,2000,(6):4-6(阮於珍,张振灿,褚凤敏等.316型不锈钢的晶间腐蚀性能[J].物理测试,2000,(6):4-6)
[17]Gang Y M.Handbook Of Stainless Steel Corrosion[M].Beijing:Metallurgy Industry Press,1992(冈毅民.中国不锈钢腐蚀手册[M].北京:冶金工业出版社,1992)
[18]Yuan Z Z,Dai Q X,Cheng X N,et al.Effects of nitrogen in auste-nitic stainless steels[J].J.Jiangsu Univ.(Natural Science),2005,23(3):72-75(袁志钟,戴起勋,程晓农等.氮在奥氏体不锈钢中的作用[J].江苏大学学报(自然科学版),2005,23(3):72-75)
[19]Wang R B.On intergranular corrosion in 18-8 austenitic stainlesssteel[J].Shanghai Iron and Steel,2003,(2):19-21(王荣滨.18-8型奥氏体不锈钢的晶间腐蚀[J].上海钢研,2003,(2):19-21)
[20]Abdel-Karim R,Elmahallawi I,El-Menshawy k.Microstructureand corrosion properties of nitrogen stainless steel 316L producedby hipping[J].Powder Metall.,2004,47(1):43-45
[21]Schino AD,Kenney J M.Effect of grain size on the corrosion resist-ance of a high nitrogen-low nickel austenitic steel[J].J.Mater.Sci.Lett.,2002,(21):1969-1970
[22]Xu C G,Wang Y M,Li MB.Influence of nitrogen on the resistanceto intergranular corrosion of high-purity austenitic stainless steel[J].Corros.Sci.Prot.Technol.,1997,9(3):192-195(许崇刚,冈毅民,李民保.氮对高纯奥氏体不锈钢耐晶间腐蚀性能的影响[J].腐蚀科学与防护技术,1997,9(3):192-195)
[23]Kasparova O V.Intergranular corrosion of nickel alloys(review)[J].Prot.Metals,2000,36(6):524-526
[24]Kasparova O V.Peculiarities of intergranular corrosion of silicon-containing austenitic stainless steels[J].Prot.Metals,2004,(5):425-427
[25]Zhou A D.Analysis of 18-8 steel intercrystalline corrosion in di-lute hydrochloric acid and the countermeasures[J].Qi Lu Petro-chem.Technol.,2003,31(1):51-53(周爱德.18-8钢在稀盐酸中的晶间腐蚀分析及对策[J].齐鲁石油化工,2003,31(1):51-53)
[26]Guo J Y.Analysis intergranular corrosion of stainless steel[J].Phys.Exam.Test.,1998,(4):18-20(郭剑英.不锈钢管晶间腐蚀的分析[J].物理测试,1998,(4):18-20)
[27]Taboda A,Prank L.Intergranular Corrosion in Nuclear System,In-tergranular Corrosion in Stainless Alloys[M].ASTM STP656.Steigerwald R F,ed.Philadelphia,PA:ASTM,1978
[28]Pan Y,Song W.Intergranular attack of sensitized austenitic stainlesssteel[J].J.Qingdao Inst.Chem.Technol.,1998,19(4):369-372(潘莹,宋维.敏化奥氏体不锈钢的晶间腐蚀研究[J].青岛化工学院学报,1998,19(4):369-372)
[29]Qin L Y,Zhang S L,Song S Z.Sensitive temperatures for intergran-ular corrosion of typical stainless steels[J].J.Chin.Soc.Corros.Prot.,2006,26(1):1-5(秦丽雁,张寿禄,宋诗哲.典型不锈钢晶间腐蚀敏化温度的研究[J].中国腐蚀与防护学报,2006,26(1):1-5)
[30]Shi H L,Jin J L.Intercrystalline corrosion of 1Cr17Ni2 stainlesssteel[J].Explosion-proof Electric Machine,2001,(3):35-36(石宏亮,金佳雷.1Cr17Ni2不锈钢的晶间腐蚀[J].防爆电机,2001(3):35-36)
[31]Zhang Y P.Study on corrosion among crystalline grains and heat-treatment technique of 1Cr18Ni9Ti[J].Coal Mine Machinery,2006,27(7):119-121(张义平.1Cr18Ni9Ti晶间腐蚀及热处理工艺研究[J].煤矿机械,2006,27(7):119-121)
[32]Gooch TG.Corrosion behavior of welded stainless steel[J].Weld.J.,1996,75(5):135-153
[33]Luo H,Zhao Z K,Feng L M,et al.Effect of welding processing pa-rameter on corrosion of welding steam of austenite stainless[J].HotWork.Technol.,2005,(6):54-58(罗辉,赵忠魁,冯立明等.焊接工艺参数对奥氏体不锈钢焊接接头腐蚀行为的影响[J].热加工工艺,2005,(6):54-58)
[34]Wu J.Corrosion&protection technology of stainless steels[J].Cor-ros.Prot.,1997,18(3):41-43(吴剑.不锈钢的腐蚀破坏与防护技术[J].腐蚀与防护,1997,18(3):41-43)
[35]Sinyavskii VS,Ulanova VV,Kalinin VD.On the mechanismof in-tergranular corrosion of aluminum alloys[J].Prot.Met.,2004,(40):537-539
[36]Dang Z J,Zhang HJ,Sui Z C.Oxalic acid test detect susceptibilityto intergranular corrosion in ferrite stainless steels[J].J.ShenyangInst.Technol.,2000,19(4):41-46(党政军,张鸿俭,隋志成等.草酸法检测铁素体不锈钢对晶间腐蚀的敏感性[J].沈阳工业学院学报,2000,19(4):41-46)
[37]Huang H,Liu C,Chen S.Electrolyte system of EPR test for detec-ting sensitization in austenitic stainless steel[J].Corrosion,1992,48(6):509-519
[38]Umemura F,Akashi M,Kawamoto T.Evaluation of IGSCC suscepti-bility of austenitic stainless steels using electrochemical reactivationmethod[J].Corros.Eng.,1980,29:163-169
[39]Cihal V.A potentiokinetic reactivation method for predicting theICC and IGSCC sensitivity of stainless steels and alloys[J].Cor-ros.Sci.,1980,20(6):737-744
[40]Majidi A P,Streicher MA.The double loop reactivation method fordetecting sensitization in AISI 304 stainless steels[J].Corrosion,1984,40(11):584-592
[41]Majidi A P,Streicher M A.The effect of methods of cutting andgrinding on sensitization in surface layers on AISI 304 stainlesssteel[J].Corrosion,1984,40(9):445-457
[42]Wu J H.Using electrochemical reactivation method survey stainlesssteel grain-boundary corrosion sensitivity[J].Metallurgical Stand-ardization&Quality,2001,39(3):12-14(武晋花.用电化学方法测量不锈钢晶间腐蚀的敏感性[J].冶金标准化与质量,2001,39(3):12-14)
[43]Zhao C J,Chen F C,Gao Z P.Comparing different criteria of EPRmethod to evaluate the susceptibility to intergranular corrosion[J].J.Chin.Soc.Corros.Prot.,2000,20(4):243-247(赵常就,陈范才,高中平.EPR法评价晶间腐蚀敏感性的各种判据的比较[J].中国腐蚀与防护学报,2000,20(4):243-247)
[44]Yu J K.Survey stainless steel grain-boundary corrosion sensitivityusing photoelectrochemical resonance Raman spectra methods[J].Corros.Sci.Prot.Technol.,1997,9(2):153-155(余家康.光电化学微区成相技术和共振拉曼光谱方法评价敏化不锈钢的晶间腐蚀敏感性[J].腐蚀科学与防护技术,1997,9(2):153-155)
[1] 郑凯, 王艺陶, 王东胜, 刘伟, 蒋颖畅, 黄嵘, 常雪婷. 腐蚀-应力耦合作用对极地船用螺旋桨低碳马氏体不锈钢失效机理影响研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1452-1462.
[2] 董少阳, 刘朝坤, 李昱彤, 夏忠虎, 甘浪, 李聪, 任延杰. 高速激光熔覆NiCrAlY涂层在900 ℃空气中的高温氧化行为[J]. 中国腐蚀与防护学报, 2026, 46(5): 1463-1474.
[3] 叶海锋, 沈书成, 陈江华. 增材制造316L不锈钢在不同温度海水环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1569-1578.
[4] 何章平, 袁誉坤, 杜颖哲, 林鹏, 徐健. 在模拟电加热器过热条件下316LN奥氏体钢缝隙腐蚀行为的研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1579-1587.
[5] 刘夏城, 邹建荣, 高良文, 周龙, 谭季波, 吴欣强, 张兹瑜. 压水堆核电站不锈钢焊缝材料腐蚀疲劳模型[J]. 中国腐蚀与防护学报, 2026, 46(5): 1613-1618.
[6] 孙欣, 屈佳伟, 高子淋, 郑越, 马爱利, 姚琳, 张连民, 郑玉贵. Mn2+ 对304L和C25不锈钢在高温硝酸中腐蚀行为的协同作用机制与响应曲面模型研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1015-1030.
[7] 张晶晶, 张震, 赵占勇, 白培康, 周杰. NaHSO3 添加对445J2铁素体不锈钢在NaCl溶液中腐蚀行为影响研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1197-1206.
[8] 陆海峰, 缪强, 梁文萍, 姚志猛, 魏少翀, 陈国星. 激光清洗对不锈钢表面耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2026, 46(4): 1227-1237.
[9] 王彦峰, 王流火, 孙仕达, 刘琦, 李亚梅, 王显宗. 柔直换流阀冷却系统关键材料失效与缓解措施研究进展[J]. 中国腐蚀与防护学报, 2026, 46(3): 653-662.
[10] 张新瑞, 薛宝权, 谭季波, 张兹瑜, 高军, 吴欣强. 含铝奥氏体不锈钢液态铅铋环境相容性研究进展[J]. 中国腐蚀与防护学报, 2026, 46(3): 671-679.
[11] 陈旭, 刘宇航, 郭建, 王岐山, 刘畅, 刘彬. 超级13Cr不锈钢在饱和CO2 油田采出液中的缝隙腐蚀行为[J]. 中国腐蚀与防护学报, 2026, 46(2): 523-532.
[12] 张金宇, 李欣, 张磊, 陈志华, 杜雨昕, 冯贺鑫, 张雪, 张洋鹏, 林如山, 李瑛, 戎利建. 几种17Cr系不锈钢在氯化物蒸汽中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 576-582.
[13] 兰博韬, 吴斌, 明洪亮, 王俭秋, 韩恩厚. 选区激光熔化奥氏体不锈钢高温高压水中应力腐蚀开裂行为研究进展[J]. 中国腐蚀与防护学报, 2026, 46(1): 1-14.
[14] 谷清宇, 宋雁飞, 张亮亮, 王楠, 雷晓维. 激光定向能量沉积17-4PH不锈钢钝化与点蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 103-114.
[15] 冯浩轩, 王馥丽, 李甲林, 杜瑶, 韦博鑫, 朱圣龙. SLM-316L不锈钢的高温氧化与腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 137-144.