Please wait a minute...
中国腐蚀与防护学报  2004, Vol. 24 Issue (4): 230-233     
  研究报告 本期目录 | 过刊浏览 |
塔里木油田油套管钢的静态腐蚀研究
李建平
东北大学材料治金学院
Static Corrosion of Oil Thimble Used in Tarim Oil Field
Jianping Li
东北大学材料治金学院
全文: PDF(149 KB)  
摘要: 研究了温度、CO2分压、溶液pH值及Cl-浓度对4种油套管常用材料N80、P105、P110和SM110腐蚀行为的影响。在温度为90℃ 时,4处材料的腐蚀速率都达到最大值。当温度为65℃ 时,除P105外,其它材料的腐蚀速率随CO2分压的增大而升高。而在90℃ 时,除P105外,其它材料的腐蚀速率在CO2分压为2.5MPa时达到最大值。溶液pH值及Cl-浓度对材料的腐蚀速率的影响不明显。
关键词 腐蚀油套管温度CO2    
Abstract:It was studied that the effect of temperature, partial pressure of CO2, pH value of solution and concentration of Cl- on corroison behavior of 4 types of steels, which include N80, P105, P110 and SM110 thimble using in oilfield. At 90℃ , the corrosion rate of all metals reached maximum value. At 65℃ , except P105, the corrosion rate of other materials increased with pressure of CO2 increasing, however, it reached maximum value at 2.5MPa pressure of CO2 when the temperature was 90℃ . The influence of pH value of solution and Cl- concentration of Tarim oil field on corrosion rate of metals investigated were lightly.
Key wordscorrosion    oil thimble    temperature    CO2
收稿日期: 2003-10-22     
ZTFLH:  TG172  
通讯作者: 李建平     E-mail: Lijianp@yahoo.com.cn
Corresponding author: Jianping Li     E-mail: Lijianp@yahoo.com.cn

引用本文:

李建平 . 塔里木油田油套管钢的静态腐蚀研究[J]. 中国腐蚀与防护学报, 2004, 24(4): 230-233 .
Jianping Li. Static Corrosion of Oil Thimble Used in Tarim Oil Field. J Chin Soc Corr Pro, 2004, 24(4): 230-233 .

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2004/V24/I4/230

[1]PalaC ,IdretH .Applicationofsimulationoftechniquesforinternalcorro sionprediction[A].Corrosion97,NACE[C].Houston,TX ,1997,2
[2]NesiS ,JohnP ,VrhovaM .CO2 corrosionofcarbonsteel-formmecha nismtoempiricalmodelling[J].Corro.Rev.,1997,15:112-126
[3]GrayLGS .Mechanismofcarbonsteelcorrosioninbrinescontainingdis solvedcarbondioxideatpH4[A].Corrosion89,NACE [C].Houston,TX ,1989,464
[4]GrayLGS ,etal.EffectofpHandtemperatureonthemechanismofcar bonsteel[A].Corrosion98,NACE[C].Houston,TX ,1998,40
[5]ZhangXY ,DiC ,LeiLC .CorrosionandControlforDioxide[M].Bei jing:ChemicalIndustryPress,2000,6:57(张学元,邸超,雷良才.二氧化碳腐蚀与控制[M].北京:化学工业出版社,2000,6:57)
[1] 董续成, 管方, 徐利婷, 段继周, 侯保荣. 海洋环境硫酸盐还原菌对金属材料腐蚀机理的研究进展[J]. 中国腐蚀与防护学报, 2021, 41(1): 1-12.
[2] 唐荣茂, 朱亦晨, 刘光明, 刘永强, 刘欣, 裴锋. Q235钢/导电混凝土在3种典型土壤环境中腐蚀的灰色关联度分析[J]. 中国腐蚀与防护学报, 2021, 41(1): 110-116.
[3] 韩月桐, 张鹏超, 史杰夫, 李婷, 孙俊才. 质子交换膜燃料电池中TA1双极板的表面改性研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 125-130.
[4] 张雨轩, 陈翠颖, 刘宏伟, 李伟华. 铝合金霉菌腐蚀研究进展[J]. 中国腐蚀与防护学报, 2021, 41(1): 13-21.
[5] 冉斗, 孟惠民, 刘星, 李全德, 巩秀芳, 倪荣, 姜英, 龚显龙, 戴君, 隆彬. pH对14Cr12Ni3WMoV不锈钢在含氯溶液中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2021, 41(1): 51-59.
[6] 左勇, 曹明鹏, 申淼, 杨新梅. MgCl2-NaCl-KCl熔盐体系中金属Mg对316H不锈钢的缓蚀性能研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 80-86.
[7] 王欣彤, 陈旭, 韩镇泽, 李承媛, 王岐山. 硫酸盐还原菌作用下2205双相不锈钢在3.5%NaCl溶液中应力腐蚀开裂行为研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 43-50.
[8] 史昆玉, 吴伟进, 张毅, 万毅, 于传浩. TC4表面沉积Nb涂层在模拟体液环境下的电化学性能研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 71-79.
[9] 郑黎, 王美婷, 于宝义. 镁合金表面冷喷涂技术研究进展[J]. 中国腐蚀与防护学报, 2021, 41(1): 22-28.
[10] 于宏飞, 邵博, 张悦, 杨延格. 2A12铝合金锆基转化膜的制备及性能研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 101-109.
[11] 贾世超, 高佳祺, 郭浩, 王超, 陈杨杨, 李旗, 田一梅. 再生水水质因素对铸铁管道的腐蚀研究[J]. 中国腐蚀与防护学报, 2020, 40(6): 569-576.
[12] 赵鹏雄, 武玮, 淡勇. 空间分辨技术在金属腐蚀原位监测中的应用[J]. 中国腐蚀与防护学报, 2020, 40(6): 495-507.
[13] 刘晓, 王海, 朱忠亮, 李瑞涛, 陈震宇, 方旭东, 徐芳泓, 张乃强. 电站用奥氏体耐热钢HR3C与Sanicro25在超临界水中的氧化特性[J]. 中国腐蚀与防护学报, 2020, 40(6): 529-538.
[14] 马鸣蔚, 赵志浩, 荆思文, 于文峰, 谷义恩, 王旭, 吴明. 17-4 PH不锈钢在含SRB的模拟海水中的应力腐蚀开裂行为研究[J]. 中国腐蚀与防护学报, 2020, 40(6): 523-528.
[15] 岳亮亮, 马保吉. 超声表面滚压对AZ31B镁合金腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2020, 40(6): 560-568.