Please wait a minute...
中国腐蚀与防护学报  2001, Vol. 21 Issue (2): 88-94          
  研究报告 本期目录 | 过刊浏览 |
316L不锈钢微动磨蚀过程力学化学交互作用的迁移行为
闫建中;吴荫顺;李久青
北京科技大学腐蚀与防护中心 腐蚀、磨蚀与表面技术开放研究实验室
FRETTING CORROSIONWEARTRANSFERABILITY OF 316L STAINLESS STEEL
;;Jiuqing Li
北京科技大学腐蚀与防护中心 腐蚀、磨蚀与表面技术开放研究实验室
引用本文:

闫建中; 吴荫顺; 李久青 . 316L不锈钢微动磨蚀过程力学化学交互作用的迁移行为[J]. 中国腐蚀与防护学报, 2001, 21(2): 88-94 .
, , . FRETTING CORROSIONWEARTRANSFERABILITY OF 316L STAINLESS STEEL[J]. J Chin Soc Corr Pro, 2001, 21(2): 88-94 .

全文: PDF(236 KB)  
摘要: 用球-平面接触微动设备研究了316L不锈钢微动损伤速率随 微动时间的变化,解析了316L不锈钢不同微动阶段的损伤机制.316L不锈钢微动分三个阶段 :第一阶段为微突体接触机制,犁沟损伤严重;第二阶段缝隙腐蚀的发生发展成为影响微动 的主导因素;第三阶段是腐蚀疲劳微断裂所致剥层机制为主的损伤过程.力学化学交互作用 分量在稳定阶段占损伤的60%以上,对316L不锈钢微动损伤影响显著;力学分量随微动过程 的进行线性下降,腐蚀分量线性增长,但力学因素是材料微动损伤的主要因素.
关键词 : 微动磨蚀,  316L不锈钢,  迁移特性,  力学化学交    
Abstract:A sphereplane contact device has been used to stu d y the fretting corrosionwear transferability of 316L stainless steel in saline solution. The evolution of fretting damage rates such as the total weight loss r ate (KTt), mechanical damage rate (Kmt), corrosion rate (K ct) and the damage induced by the synergistic effect between mechanical and chemical actions as a function of fretting cycle has been investigated. In t he same time, the variation of the components of mechanical action, corrosion ac tion and the synergistic effect in the total weight loss rate have also been stu died. The variations of KTt,Kmt,Kct were equal to each other. In spite of the difference between the variation of Kct an d the variations of KTt,Kmt,Kct,the fretting of 31 6L stainless steel was characteristic of three stages. And each of these three s tages was of the different mechanism. In the beginning of fretting the damage oc curred in local areas, and the material suffered ploughing damage because of the hard debris formed by fabrication of passive film. In the second period, seriou s crevice corrosion occurred nearby the fretted region, which has taken a great important role in the fretting process. And in the final period, the damage mech anism could be defined as corrosive flaking process. The results showed there wa s a relationship between the of damage rates and mechanisms. The synergistic eff ect took an important role in fretting, and in stable stage, more than 60 percent of fretting damage was due to the conjoint action of mechanical and chemical effects. The result finds the inter relationship between the transition s of fretting damage rates and the synergistic effect and the variation of damag e mechanisms in different fretting periods.
Key words: fretting corrosionwear    316L stainless steel    transit ion    synergistic effect
收稿日期: 2000-02-14     
ZTFLH:  TG113.2  
[1]WaterhouseRB .FrettingCorrosion[M ].NewYork :PergamonPress,1972
[2 ]WaterhouseRB .FrettingFatigue[M].London :AppliedSciencePublishers ,1981
[3]LiShizhou ,DongXianglin .MaterialErosionandFretting[M].Beijing :EngineeringIndustryPress ,1987(李诗卓 ,董祥林 .材料的冲蚀磨损与微动磨损 [M ].北京 :机械工业出版社 ,1987)
[4 ]LiDongzhi.FrettingandProtection[M ].Xian :ShanxiScienceandTechnologyPress ,1992(李东紫 .微动磨损与防护技术 [M ].西安 :陕西科学技术出版社 ,1992 )
[5 ]HoeppnerDWandChandrasekaranV .Frettinginorthopaedicimplants :areview[J].Wear ,1994,173:189
[6 ]YanJianzhong ,WuYinshun ,ZhangLin ,etal.Theeffectoflocalizedcorrosiononfrettingattackof 316Lstainlesssteelin 0 .9%NaClsolution[J].JournalofChineseSocietyforCorrosionandProtection ,2 0 0 0 ,2 0 (4 ) :2 37- 2 42(闫建中 ,吴荫顺 ,张琳 ,李久青 .316L不锈钢在 0 .9%NaCl溶液微动过程中局部腐蚀作用研究 [J].中国腐蚀与防护学报 ,2 0 0 0 ,2 0 (4 ) :2 37- 2 42
[7]MadsenBrentW .Measurementoferosion -corrosionsynergismwithaslurryweartestapparatus[J].Wear,1988,12 3:12 7
[8]ZhouS ,StackMM ,NewmanRC .Characterizationofsynergisticeffectbetweenerosionandcorrosioninanaqueousenviron mentusingelectrochemicaltechniques[J].Corrosion ,1996 ,5 2 (12 ) :934
[9]ZhengYugui,YaoZhiming ,XiangyunWei,etal.Thesynergisticeffectbetweenerosionandcorrosioninacidicslurrymedium[J].Wear ,1995 ,186 - 187:5 5 5
[10 ]ZhangTC ,JiangXX ,LiSZ ,etal.Aquantitativeestimationofthesynergybetweencorrosionandabrasion[J].CorrosionSci ence ,1994,36 (12 ) :195 3
[11]MatsumuraM ,OkaY ,HiuraH ,etal.Theroleofpassivationfilminpreventingslurryerosion -corrosionofausteniticstainlesssteel[J].ISIJInt.,1991,31(2 ) :16 8
[12 ]HuoShizhong .Electro chemicalProtection[M ].Beijing :ChemicalIndustryPress,1988,19(火时中 .电化学保护 [M ].北京 :化学工业出版社 ,1988,19)
[1] 叶海锋, 沈书成, 陈江华. 增材制造316L不锈钢在不同温度海水环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1569-1578.
[2] 李科, 李天雷, 曹晓燕, 姜流, 王雅熙, 肖泽渝, 钟显康. 316L不锈钢焊接接头在含S-H2S环境中的腐蚀行为[J]. 中国腐蚀与防护学报, 2025, 45(6): 1725-1733.
[3] 商强, 满成, 逄昆, 崔中雨, 董超芳, 崔洪芝. 后热处理对不同含碳量SLM-316L不锈钢晶间腐蚀行为的作用机制研究[J]. 中国腐蚀与防护学报, 2023, 43(6): 1273-1283.
[4] 李敏, 胡凌越, 胡科峰, 宋遥, 张泽群, 李宗欣, 张博威, 董超芳, 吴俊升. 316L不锈钢在深海环境中的缝隙腐蚀行为研究[J]. 中国腐蚀与防护学报, 2023, 43(6): 1375-1382.
[5] 张媛, 张弦, 陈思雨, 李腾, 刘静, 吴开明. 磷酸浓度对316L不锈钢耐蚀性及钝化膜特性的影响[J]. 中国腐蚀与防护学报, 2022, 42(5): 819-825.
[6] 张泽群, 陈质彬, 董其娟, 邬聪, 李宗欣, 王禾祖, 吴飞, 张博威, 吴俊升. 低合金钢、不锈钢和铝镁合金在模拟深海环境中的电偶腐蚀行为研究[J]. 中国腐蚀与防护学报, 2022, 42(3): 417-424.
[7] 王淇萱, 吕文生, 杨鹏, 诸利一, 廖文景, 朱远乐. 尾矿库埋入式传感器不锈钢外壳腐蚀研究[J]. 中国腐蚀与防护学报, 2022, 42(2): 331-337.
[8] 张文丽, 张振龙, 吴兆亮, 韩思柯, 崔中雨. 温度对316L不锈钢在油田污水中点蚀行为的影响研究[J]. 中国腐蚀与防护学报, 2022, 42(1): 143-148.
[9] 孙宝壮, 周霄骋, 李晓荣, 孙玮潞, 刘子瑞, 王玉花, 胡洋, 刘智勇. 不同组织的316L不锈钢在NH4Cl环境下应力腐蚀行为与机理[J]. 中国腐蚀与防护学报, 2021, 41(6): 811-818.
[10] 张龙华, 李长君, 潘磊, 韩思柯, 王昕, 崔中雨. S2-对316L不锈钢在模拟油田污水中的腐蚀行为影响研究[J]. 中国腐蚀与防护学报, 2021, 41(5): 625-632.
[11] 伊光辉, 郑大江, 宋光铃. 酸洗对316L不锈钢表面形貌、耐蚀性能及表面光学常数的影响[J]. 中国腐蚀与防护学报, 2021, 41(4): 461-468.
[12] 胡玉婷, 董鹏飞, 蒋立, 肖葵, 董超芳, 吴俊升, 李晓刚. 海洋大气环境下TC4钛合金与316L不锈钢铆接件腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 167-174.
[13] 秦越强, 左勇, 申淼. FLiNaK-CrF3/CrF2氧化还原缓冲熔盐体系对316L不锈钢耐蚀性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(2): 182-190.
[14] 周霄骋, 崔巧棋, 贾静焕, 刘智勇, 杜翠薇. Cl-浓度对316L不锈钢在碱性NaCl/Na2S溶液中SCC行为的影响[J]. 中国腐蚀与防护学报, 2017, 37(6): 526-532.
[15] 王彦亮,陈旭,王际东,宋博,范东升,何川. 316L不锈钢在不同pH值硼酸溶液中的电化学行为研究[J]. 中国腐蚀与防护学报, 2017, 37(2): 162-167.