AIR OXIDATION AT 400℃~700℃ OF TITANIZED PURE COPPER PREPARED BY A DOUBLE GLOW DISCHARGE PROCESS

J Chin Soc Corr Pro

2005, Vol. 25

Issue (2): 102-105 DOI:

Research Report

Current Issue | Archive | Adv Search

AIR OXIDATION AT 400℃~700℃ OF TITANIZED PURE COPPER PREPARED BY A DOUBLE GLOW DISCHARGE PROCESS

Qinglong Yuan;Yuefei Zhang;Yongan Su;Chenzhong Chi;Bin Tang;Zhong Xv

太原理工大学机械工程学院

Download:

PDF(115KB)
Export: BibTeX | EndNote (RIS)

Abstract The oxidation behavior of pure copper and Cu-Ti alloy layer made by double glow discharge process were investigated in air at 400℃~700℃.The formed oxide scales were examined by XRD,and the oxidation mechanism was discussed.The results indicated that the oxidation resistance of Cu is significantly improved by titanizing treatment.After oxidation at 700℃ for 100h,the formed oxide scale on pure copper consists of Cu2O,CuO and that on titanized Cu is mainly composed of TiO2.The oxidation kinetic curves follow parabolic rate law.

Key words: oxidation Cu-Ti alloy double glow discharg

Received: 28 September 2003

ZTFLH:	TG174.445
	TG172.3

Corresponding Authors: Qinglong Yuan

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Qinglong Yuan
	Yuefei Zhang
	Yongan Su
	Chenzhong Chi
	Bin Tang
	Zhong Xv

Cite this article:

Qinglong Yuan; Yuefei Zhang; Yongan Su; Chenzhong Chi; Bin Tang; Zhong Xv. AIR OXIDATION AT 400℃~700℃ OF TITANIZED PURE COPPER PREPARED BY A DOUBLE GLOW DISCHARGE PROCESS. J Chin Soc Corr Pro, 2005, 25(2): 102-105 .

URL:

https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y2005/V25/I2/102

[1]MeadenGT .ElectricalResistanceofMetals[M ].NewYork:PlenumPress,1965,112
[2]NagarjunaS ,BalasubramanianK ,SarmaDS .EffectofTiadditionsontheelectricalresistivityofcopper[J].Mater.Sci.Eng.A225,1997:118-124
[3]YuanQL ,SuYA ,ZhangYF ,XuZ .Titanizingonthesurfaceofpurecopperwithdoubleglowdischargeprocess[J].TransMaterHeatTreat,2003,24(3):70-73(袁庆龙,苏永安,张跃飞,徐重.纯铜双层辉光离子临界区渗钛研究[J].材料热处理学报,2003,24(3):70-73)
[4]ZhangWQ .MetalCorrosionHandbook[M ].Shanghai:ShanghaiScienceandTechnologyPress,1987:18(张文奇.金属腐蚀手册[M ].上海:上海科学技术出版社,1987:18)
[5]WingertP ,AllenS ,BevingtonR .Effectsofgraphiteparticlesizeandprocessingontheperformanceofsilver-graphitecontacts[J].IEEETransCHMT -15,1992,2:154-15

[1]	WEI Zheng, MA Baoji, LI Long, LIU Xiaofeng, LI Hui. Effect of Ultrasonic Rolling Pretreatment on Corrosion Resistance of Micro-arc Oxidation Coating of Mg-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 117-124.
[2]	LIU Xiao, WANG Hai, ZHU Zhongliang, LI Ruitao, CHEN Zhenyu, FANG Xudong, XU Fanghong, ZHANG Naiqiang. Oxidation Characteristics of Austenitic Heat-resistant Steel HR3C and Sanicro25 in Supercritical Water for Power Station[J]. 中国腐蚀与防护学报, 2020, 40(6): 529-538.
[3]	XIE Dongbai, HONG Hao, WANG Wen, PENG Xiao, DUO Shuwang. Oxidation Behavior of Stainless Steel 1Cr11Ni2W2MoV in a Simulated Kerosene Combustion Environment[J]. 中国腐蚀与防护学报, 2020, 40(4): 358-366.
[4]	CAO Jingyi, FANG Zhigang, CHEN Jinhui, CHEN Zhixiong, YIN Wenchang, YANG Yange, ZHANG Wei. Preparation and Properties of Micro-arc Oxide Film with Single Dense Layer on Surface of 5083 Aluminum Alloy[J]. 中国腐蚀与防护学报, 2020, 40(3): 251-258.
[5]	FANG Xudong, LIU Xiao, XU Fanghong, LI Ruitao, ZHU Zhongliang, ZHANG Naiqiang. Oxidation Behavior in Supercritical Water of Domestic Austenitic Steel C-HRA-5 for Uultra-supercritical Power Stations[J]. 中国腐蚀与防护学报, 2020, 40(3): 266-272.
[6]	ZHENG Yanxin, LIU Ying, SONG Qingsong, ZHENG Feng, JIA Yuchuan, HAN Peide. High-temperature Oxidation Behavior and Wear Resistance of Copper-based Composites with Reinforcers of C, ZrSiO₄ and Fe[J]. 中国腐蚀与防护学报, 2020, 40(2): 191-198.
[7]	XU Xunhu,HE Cuiqun,XIANG Junhuai,WANG Ling,ZHANG Honghua,ZHENG Xiaodong. High Temperature Oxidation Behavior of Co-20Re-25Cr-1Si Alloy in 0.1 MPa Pure Oxygen[J]. 中国腐蚀与防护学报, 2020, 40(1): 75-80.
[8]	JIANG Dongxue,FU Ying,ZHANG Junwei,ZHANG Wei,XIN Li,ZHU Shenglong,WANG Fuhui. Preparation and Properties of Alumina Ceramic Film on Ti-alloy Surface[J]. 中国腐蚀与防护学报, 2019, 39(6): 469-476.
[9]	XIAO Jintao,CHEN Yan,XING Mingxiu,JU Pengfei,MENG Yingen,WANG Fang. Effect of Process Parameters on Corrosion Resistance of Anodizing Film on 2195 Al-Li Alloy[J]. 中国腐蚀与防护学报, 2019, 39(5): 431-438.
[10]	AI Peng,LIU Lixiang,LI Xiaogang,JIANG Wentao. Influence of TiAlSiN Coatings on High Temperature Oxidation Resistance of γ-TiAl Based Alloys[J]. 中国腐蚀与防护学报, 2019, 39(4): 306-312.
[11]	Yunhai MA. Effect of Shot Peening on Oxidation Resistance of Super 304H Steel in Supercritical Steam[J]. 中国腐蚀与防护学报, 2019, 39(3): 245-252.
[12]	Junjie XIA,Hongzhi NIU,Min LIU,Huazhen CAO,Guoqu ZHENG,Liankui WU. Enhancement of High Temperature Oxidation Resistance of Ti48Al5Nb Alloy via Anodic Anodization in NH₄F Containing Ethylene Glycol[J]. 中国腐蚀与防护学报, 2019, 39(2): 96-105.
[13]	Dongbai XIE,Youyu ZHOU,Jintao LU,Wen WANG,Shenglong ZHU,Fuhui WANG. Effect of Al/Si Content on Corrosion of Ni-based Alloys in Supercritical Water[J]. 中国腐蚀与防护学报, 2019, 39(1): 68-76.
[14]	Ling WANG,Junhuai XIANG,Honghua ZHANG,Songlin QIN. High Temperature Oxidation Behavior of Three Co-20Re-xCr Alloys in 3.04×10^-5 Pa Oxygen at 1000 and 1100 ℃[J]. 中国腐蚀与防护学报, 2019, 39(1): 83-88.
[15]	Hao CHEN,Qing CHEN,Li XIN,Long SHI,Shenglong ZHU,Fuhui WANG. Preparation and High Temperature Corrosion Behavior of Aluminized Nanocrystalline Coating on DD98M Alloy[J]. 中国腐蚀与防护学报, 2019, 39(1): 59-67.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed