THE MUTUAL INFLUENCE BETWEEN DEFORMATION AND ANODIC DISSOLUTION OF AISI 321 AUSTENITIC STAINLESS STEEL

J Chin Soc Corr Pro

1997, Vol. 17

Issue (3): 188-194 DOI:

技术报告

Current Issue | Archive | Adv Search

THE MUTUAL INFLUENCE BETWEEN DEFORMATION AND ANODIC DISSOLUTION OF AISI 321 AUSTENITIC STAINLESS STEEL

Download:

PDF(454KB)
Export: BibTeX | EndNote (RIS)

Abstract

The mutual influence between deformation and anodic dissolution of AISI 321 austenitic stainless steel in an acidic chloride solution was studied. The corrosion rate of the steel increased remarkably due to the deformation-accelerated anodic and cathodic processes. The creep rate was increased while the yield strength was reduced by anodic dissolution. The analysis by thermal activation theory of deformation showed a linear relationship between the logrithm of creep rate and the logrithm of anodic current. Besides, the reciprocal of yield strength was also linearly dependent on the logrithm of anodic current. These findings were in good agreement with experimental results.

Key words: Austenitic stainless steel Anodic dissolution Deformation

Received: 25 June 1997

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

Cite this article:

HUANG Yanliang CAO Chu-nan LIN Haichao HOU Baorong (Institute of Oceanology; Chinese Academy of Sciences; Qingdao 266071) (Institue of Corrosion and Protection of Metals; Chinese Academy of Sciences;State Key Laboratory of Corrosion and Protection; Shenya. THE MUTUAL INFLUENCE BETWEEN DEFORMATION AND ANODIC DISSOLUTION OF AISI 321 AUSTENITIC STAINLESS STEEL. J Chin Soc Corr Pro, 1997, 17(3): 188-194.

URL:

https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y1997/V17/I3/188

1 Hideo Niwa,Satoru Aswa,Shiro Haruyama,Mori T.Corros.Sci.,1983,23:969
2 Yu J,Parkins E N,Xu Y,Thompson G,Wood G C.Corros.Sci.,1987,27:141
3 Jones D A.Metall.Trans.A.,1985,16A:1133
4 曹楚南.新材料研究-第二届中国材料研讨会,武汉,1988.p238-244
5 曹楚南,杨乾刚,吕明,林海潮.中国腐蚀与防护学报,1992,12:109
6 黄彦良,曹楚南,吕明,林海潮.腐蚀科学与防护技术,1992,4:264
7 Kramer I R.Trans.Metall.Soc.AIME,1963,227:1003
8 Kramer I R.Trans.Metall.Soc.AIME,1964,230:991

[1]	SUN Xiaoguang,HAN Xiaohui,ZHANG Xingshuang,ZHANG Zhiyi,LI Gangqing,DONG Chaofang. Corrosion Resistance and Environmentally-friendly Chemical Passivation of Welded Joints for Ultra-low Carbon Austenitic Stainless Steel[J]. 中国腐蚀与防护学报, 2019, 39(4): 345-352.
[2]	Xiwu LIU,Xiaoyan ZHAO,Xin'an CUI,Lanfei XU,Xiaowei LI,Rongqi CHENG. Corrosion Behavior of 304L Stainless Steel in Nitric Acid-Sodium Nitrate Solutions[J]. 中国腐蚀与防护学报, 2018, 38(6): 543-550.
[3]	Xiaoyan ZHAO, Xiwu LIU, Xin'an CUI, Fengchang YU. Corrosion Behavior of 304L Steel in Nitric Acid Environment[J]. 中国腐蚀与防护学报, 2018, 38(5): 455-462.
[4]	Chao SUN, Xiao YANG, Yuhua WEN. Effect of High-Al Austenitic Stainless Alloy Coatings Prepared by Magnetron Sputtering on High Temperature Oxidation Resistance of 316 Stainless Steel[J]. 中国腐蚀与防护学报, 2017, 37(6): 590-596.
[5]	Jingling MA,Fengzhang REN,Guangxin WANG,Yi XIONG,Jiuba WEN. Electrochemical Performance of Al-Mg-Sn-Ga Aluminum Anode Alloy[J]. 中国腐蚀与防护学报, 2016, 36(5): 421-426.
[6]	YIN Kaiju, QIU Shaoyu, TANG Rui, HONG Xiaofeng, ZHANG Lefu, ZHANG Qiang. CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER[J]. 中国腐蚀与防护学报, 2012, 32(5): 375-380.
[7]	JIANG Ke, CHEN Xuedong, YANG Tiecheng, ZHANG wei, LIANG Chunlei. HIGH TEMPERATURE NAPHTHENIC ACID CORROSION RESEARCH OF TYPICAL AUSTENITIC STAINLESS STEEL[J]. 中国腐蚀与防护学报, 2012, 32(1): 59-63.
[8]	SUN Tao, DENG Bo, XU Juliang, LI Jin, JIANG Yiming. INFLUENCE OF NIOBIUM AND NITROGEN ON THE RESISTANCE TO PITTING AND INTERGRANULAR CORROSION OF 304 AUSTENITIC STAINLESS STEEL[J]. 中国腐蚀与防护学报, 2010, 30(6): 421-426.
[9]	XU Shan,DU Nan,ZHAO Qing,YE Mingyang. MONITORING THE PITTING SUSCEPTIBILITY OF AUSTENITIC STAINLESS STEEL IN NaCl SOLUTION BY ELECTRONIC SPECKLE PATTERN INTERFEROMETRY[J]. 中国腐蚀与防护学报, 2010, 30(5): 403-409.
[10]	CHEN Meiling LIU Yuandong YANG Li YANG Jun GAO Hong. PITTING CORROSION RESISTANCE OF NANO-SiC POWDERS REINFORCED CAST STAINLESS STEEL[J]. 中国腐蚀与防护学报, 2009, 29(6): 411-414.
[11]	FAN Liru LIU Yuwen WANG Kuan LI Yuan SUN Qina. EFFECT OF THE SAMPLE STATE ON DECHROMIZATION OF Cu-Cr ALLOY[J]. 中国腐蚀与防护学报, 2009, 29(1): 15-18.
[12]	HU Daochun SUN Lemin SHANGGUAN Bao. TRIBOLOGICAL CHARACTERISTICS OF T2／QCr0.5 RUBBING PAIRS WITH ELECTRIC CURRENT AND DYNAMIC LOAD[J]. 中国腐蚀与防护学报, 2009, 29(1): 35-39.
[13]	. CORROSION FATIGUE BEHAVIOR OF 304 STAINLESS STEEL MICRO-SIZED SPECIMENS[J]. 中国腐蚀与防护学报, 2008, 28(2): 99-103 .
[14]	;. RESEARCH OF EPR ON THE SUSCEPTIBILITY TO INTERGRANULAR ATTACK OF AUSTENITIC STAINLESS STEEL[J]. 中国腐蚀与防护学报, 2007, 27(1): 54-59 .
[15]	Hongmei Li; Xing Liu; Xun Cai; Wu Yang. Electrochemical Potentiokinetic Reactivation Measurement and Surface Feature Observation on Austenitic Stainless Steel Irradiated by High Energy He+ or Fe+ Ions[J]. 中国腐蚀与防护学报, 2006, 26(1): 37-42 .

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed