Please wait a minute...
中国腐蚀与防护学报  2000, Vol. 20 Issue (5): 269-274          
  研究报告 本期目录 | 过刊浏览 |
机械合金化Cu-Cr合金在0.1MPa纯氧气中的氧化
付广艳;牛焱;王崇琳
中科院腐蚀与防护研究所
OXIDATION OF MECHANICALLY ALLOYED Cu-Cr ALLOYS IN 0.1 MPa O2
Guangyan Fu;Yan Niu;;
中科院腐蚀与防护研究所
引用本文:

付广艳; 牛焱; 王崇琳 . 机械合金化Cu-Cr合金在0.1MPa纯氧气中的氧化[J]. 中国腐蚀与防护学报, 2000, 20(5): 269-274 .
, , . OXIDATION OF MECHANICALLY ALLOYED Cu-Cr ALLOYS IN 0.1 MPa O2[J]. J Chin Soc Corr Pro, 2000, 20(5): 269-274 .

全文: PDF(244 KB)  
摘要: 采用机械合金化法制备了两相颗粒极细的Cu-20Cr与Cu-40Cr合金,研究其在700-800℃0.1MPa纯氧气中的氧化。MACu-40Cr合金24h氧化后均形成了连续的Cr2O3层,这主要由于两相颗粒的细化,加快了Cr颗粒的溶解,缩短了Cr的扩散距离,从而有效地促进CrO3层的形成。
关键词 : 机械合金化,  Cu-Cr合金,  氧化    
Abstract:The oxidation behavior of Cu-Cr alloys with Cr concentrations 20%(mass) (MACu-20Cr) and 40% (MACu-40Cr) was studied in 0.1 MPa O2 at 700-800℃.The Cu-Cr alloys were prepared by mechanical alloying, presenting a much smaller particle size of phases. Both MA Cu-20Cr of MACu-40Cr formed a continuos Cr2O3 layer.The result is connected with the fact that the smaller Cr-rich particles dissolve more rapidly ,have short diffusion distance between Cr-rich phase particles,and can provide a faster supply of Cr to the external Cr2O3 scales with respect to larger particles.
Key words: mechanical alloying    Cu-Cr alloy    oxidation
收稿日期: 1999-08-23     
ZTFLH:  TG172.82  
[1] Kofstad P.High Temperature Corrosion[M].London: Elsevier Applied Science,1988.389 - 408, 335 - 340.
[2]付广艳,牛焱,吴维 .二元双相Cu-50Cr合金在700-900℃空气中的氧化[J].金属学报,1998,34(2):159-163.
[3] Niu Yan, Gesmundo F,Fu Guangyan,Douglass D L. The Sulfidation of three two-phase Cu-Cr alloys in H2-H2S mixtures at 400~600℃[J]. Oxidation of Metals,1998,50:327-335
[4]付广艳,牛焱,吴维 .粉末冶金Cu-Cr合金在0.1MPa纯氧气中的氧化[J].中国有色金属学报.接收待发表
[5] Chakrabarti D J,Laughlin D E. Copper-Chromium phase diagram[J].Bulletin of alloy phase diagram,1984, 5:59-67.
[6] Gesmundo F, Nanni P.Oxidation behavior of two-phase alloy Fe-44 w/o Cu[J].J.Electrochemical Society ,1980,81773-1782
[7] Niu Yan,Fu Guangyan,Wu Weitao,Gesmundo F.The oxidation of a Fe-Ce alloy under low oxygen pressures at 600-800℃[J].HighTemperature Materials and Processes,1999,18:159-172
[8] Fu Guangyan,Niu Yan,Wu Weitao.The oxidation of a Co-15wt% Ce alloy under low oxygen pressures at 600~800℃[J].CorrosionScience,1998,40:1215-1228
[9] Gesmundo F,Niu Y,Viani F,et al.The transition from the formation of mixed scales to the selective oxidation of the most component inthe corrosion of single and two-phase binary alloys[J].oxidation of Metals,1993,40:373 - 393
[10] Gesmundo F,Viani F, Niu Yan.The possible scaling modes in the high-temperature oxidation of two-phase binary alloys[J]. Oxidation of metals,1994,42:409-429.
[11] Perez P, Gonzalez-Carresco J L, Adeva P. Influence of powder particle size on the oxidation behavior of a PM Ni3 AI alloy[J]. Oxidationof Metals, 1998,49:485-507
[1] 董少阳, 刘朝坤, 李昱彤, 夏忠虎, 甘浪, 李聪, 任延杰. 高速激光熔覆NiCrAlY涂层在900 ℃空气中的高温氧化行为[J]. 中国腐蚀与防护学报, 2026, 46(5): 1463-1474.
[2] 柯定芳, 吴芳芳, 朱兆彬, 谢声益, 洪静, 陈悦, 李亮, 李昊, 曹发和. 氧化石墨烯/铈基金属有机框架构筑高稳定长耐蚀防护涂层[J]. 中国腐蚀与防护学报, 2026, 46(4): 1095-1106.
[3] 张晓晨, 杨闯, 姜旭, 陈永生, 赵佳祥, 赵阳, 周鹏, 张涛, 王福会. 镁合金的一种致密微弧氧化涂层工艺及性能的研究[J]. 中国腐蚀与防护学报, 2026, 46(4): 1218-1226.
[4] 周吉, 帅若辉, 杨继凯, 娄丽艳, 刘伊, 鲁俊豪, 蔡志海, 王海斗, 李成新. 21CrMoV钢表面激光熔覆Stellite合金涂层的组织及高温氧化性能[J]. 中国腐蚀与防护学报, 2026, 46(4): 1269-1278.
[5] 汤智杰, 谢冬柏, 多树旺, 赖天, 洪昊, 单国. 在助燃剂燃烧气氛中的PVC热解对金属铜氧化行为与机制的影响[J]. 中国腐蚀与防护学报, 2026, 46(4): 1289-1295.
[6] 贺佳, 李欢, 覃世军, 芦伟, 汪卫华, 储德林. 高温流动液态锂铅对氧化物弥散强化钢的长时间腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(3): 911-918.
[7] 张云, 张宇鹏, 董泽华, 张欣欣. 再生镁合金表面微弧氧化/水滑石复合膜层的一步法制备及其耐蚀性能研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 441-449.
[8] 高士鑫, 尹春雨, 巫英伟, 黄洪涛, 张坤, 何梁, 叶天舟, 陈平. FeCrAl表面氧化对氘渗透性能影响研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 483-490.
[9] 张超, 何闯, 夏凯, 郭亭山, 梁志远. 高温蒸汽环境下K444和K452合金及涂层的氧化行为[J]. 中国腐蚀与防护学报, 2026, 46(2): 500-510.
[10] 施艳, 饶智航, 缪程平, 张洋, 陈赵扬, 屠晓华, 李加友, 褚有群. 铜封端负载8-HQ埃洛石纳米管镁合金微弧氧化自修复涂层的制备及耐蚀性能[J]. 中国腐蚀与防护学报, 2026, 46(2): 511-522.
[11] 张金宇, 李欣, 张磊, 陈志华, 杜雨昕, 冯贺鑫, 张雪, 张洋鹏, 林如山, 李瑛, 戎利建. 几种17Cr系不锈钢在氯化物蒸汽中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(2): 576-582.
[12] 祝丁丁, 赵希雅, 张晓美, 梅子期, 逯文君, 王帅. 增材制造与铸造钛铝合金的微观组织及高温氧化行为对比研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 71-80.
[13] 冯浩轩, 王馥丽, 李甲林, 杜瑶, 韦博鑫, 朱圣龙. SLM-316L不锈钢的高温氧化与腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 137-144.
[14] 刘海龙, 王力, 赵卫国, 韩嘉彧, 王轻松, 龙佳怡, 贺星, 高黎黎, 王华, 胡平. 钼合金表面Si-ZrB2-Ti-Cr多元涂层的激光熔覆制备及高温抗氧化性能[J]. 中国腐蚀与防护学报, 2026, 46(1): 155-164.
[15] 杨潇文, 陈泽浩, 杨莎莎, 王群昌, 王金龙, 陈明辉, 王福会. 镍基单晶高温合金N5及其纳米晶涂层的短期热腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(1): 252-260.