一种定性判断三维残余应力场测量值的新思路

doi:10.11902/1005.4537.2013.149

中国腐蚀与防护学报

2014, Vol. 34

Issue (3): 283-286 DOI: 10.11902/1005.4537.2013.149

本期目录 | 过刊浏览

一种定性判断三维残余应力场测量值的新思路

卢国鑫, 陆峰(

)

北京航空材料研究院金属腐蚀与防护研究室北京 100095

A New Idea to Qualitatively Determine 3D Residual Stress Measurements

LU Guoxin, LU Feng(

)

Metal Corrosion and Protection Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095, China

全文: PDF(1523 KB) HTML

摘要:

提出了一种定性判断工件表面残余应力变化趋势的新思路并利用前人实验进行了验证。对于已获得表面残余压应力场的表面强化试样,该理论表明：累计应力松弛量导致剥层工件剩余部分的残余压应力场强度与残余拉应力场强度大幅下降；在表层一定深度范围内残余应力的测量值略大于实际值；表面残余压应力场的深度相比实际残余压应力场的值较大。

关键词 ：弹性力学, 残余应力, 应力场强度

Abstract：

A new idea was proposed in the present work, based on the principle for the balance of stress field strength, to judge qualitatively the surface residual stress trends, and it was verified by the experimental results in literatures. For the surface-strengthened sample with a surface residual compressive stress field, the proposed theory shows that, the cumulative stress relaxation rate leads to the sharp decrease in the rest of the residual compressive stress field intensity and residual tensile stress field intensity, the surface residual stress measurements within a certain depth range are slightly greater than the actual values, the depth of surface residual compressive stress field is larger than that of the actual residual compressive stress field.

Key words： elastic mechanics residual stress stress field intensity

收稿日期: 2013-08-20

ZTFLH:

TG115.22

作者简介: null

卢国鑫，男，1988年生，硕士生，研究方向为表面强化及改性

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	卢国鑫
	陆峰
44.8K

引用本文:

卢国鑫, 陆峰. 一种定性判断三维残余应力场测量值的新思路[J]. 中国腐蚀与防护学报, 2014, 34(3): 283-286.
Guoxin LU, Feng LU. A New Idea to Qualitatively Determine 3D Residual Stress Measurements. Journal of Chinese Society for Corrosion and protection, 2014, 34(3): 283-286.

链接本文:

https://www.jcscp.org/CN/10.11902/1005.4537.2013.149 或 https://www.jcscp.org/CN/Y2014/V34/I3/283

图1

图2

图3

图4

图5

图6

图7

[1]	Zhang D Q,He J W. Residual Stress in the Material Part and X-ray Diffraction Analysis[M]. Xi'an: Xi'an Jiaotong University Press, 1999
[1]	(张定铨,何家文. 材料中残余应力的X射线衍射分析和作用[M]. 西安: 西安交通大学出版社, 1999)
[2]	Jiang G, Tan M H, Wang W M, et al. The current research status of residual stress measurement methods[J]. Mach. Tool Hydraul., 2007, 35(6): 213-216
[2]	(蒋刚, 谭明华, 王伟明等. 残余应力测量方法的研究现状[J]. 机床与液压, 2007, 35(6): 213-216)
[3]	Xue H, Li R F, Ge R, et al. Research progress of stress superimposing method for residual stress determination[J]. Adv. Mater. Res., 2011, 295: 2073-2078
[4]	Prevey P S. X-ray Diffraction Residual Stress Techniques [M]. Ohio: ASM International ASM Handbook, 1986
[5]	Zhao S S, Du H, Hua W G, et al. The depth distribution of residual stresses in (Ti, Al) N films: Measurement and analysis[J]. J. Mater. Res., 2007, 22: 2659-2662
[6]	Yang Y Y, Li C F, Xu H Z. A study of longitudinal cracking and the forming technology for deep-drawn austenitic stainless-steel cups[J]. J. Mater. Proc. Technol., 1992, 30(2): 167-172
[7]	Yonetani S. Translated by Zhu J P, Shao H M. The Generation of Residual Stress and Countermeasures[M]. Beijing: China Machine Press, 1983: 149
[7]	(米谷茂著. 朱荆璞, 邵会孟译. 残余应力的产生和对策[M]. 北京: 机械工业出版社, 1983: 149)
[8]	Wang Q C, Ke Y L, Xing H Y. Internal residual stress testing technology research of board parts[J]. J. Univ. Zhejiang (Technol. Ed.), 2005, 39(3): 381-384
[8]	(王秋成, 柯映林, 邢鸿燕. 板类构件内部残余应力测试技术研究[J]. 浙江大学学报 (工学版), 2005, 39(3): 381-384)
[9]	Dong H Y, Ke Y L. Analysis and simulation for machining deformation with the impact of residual stress[J]. J. Aero. Mater., 2005, 25(5): 54-57
[9]	(董辉跃, 柯映林. 残余应力对加工变形影响的分析与模拟[J]. 航空材料学报, 2005, 25(5): 54-57)
[10]	Gao Y K, Yao M, Li J K. An analysis of residual stress fields caused by shot peening[J]. Metall. Mater. Trans., 2002, 33(6)A: 1775-1778
[11]	Li J K, Yao M, Wang R Z, et al. Comprehensive effects theory for shot peening strengthening[J]. Acta Aero. Astro. Sin., 1992, 13(11): A670-A677
[11]	(李金魁, 姚枚, 王仁智等. 喷丸强化的综合效应理论[J]. 航空学报, 1992, 13(11): A670-A677)
[12]	Liu J Y. Residual stress measurement technique by X ray and the applied research [D]. University of Technology Beijing, 2009
[12]	(刘金艳. X射线残余应力的测量技术与应用研究 [D]. 北京工业大学, 2009)
[13]	Huang Z T, Tian W H. Microstructure and stress distribution of GCr15 steel balls after surface deformation-hardening treatment[J]. J. South China Univ. Technol.(Nat. Sci.), 2011, 39(6): 84-89
[13]	(黄志涛, 田文怀. 表面形变强化后 GCr15 钢球的显微组织和应力分布[J]. 华南理工大学学报 (自然科学版), 2011, 39(6): 84-89)
[14]	Jiang J L, Zhao M P. Analysis of residual stress field at Cold-Worked fastener hole[J]. Acta Aero. Astro. Sin., 1991, (10): 61-63
[14]	(蒋金龙, 赵名泮. 冷挤压孔板残余应力场分析[J]. 航空学报, 1991, (10): 61-63)
[15]	Li Y H, Wu Y X, Gong H, et al. Measuring residual stress in axial workpiece by X-ray diffraction (XRD) method[J]. Mater. Mech. Eng., 2012, 36(7): 96-99
[15]	(李益华, 吴运新, 龚海等. 应用 X 射线衍射法测定轴类工件中的残余应力[J]. 机械工程材料, 2012, 36(7): 96-99)

[1]	李雨,关蕾,王冠,张波,柯伟. 机械应力对不锈钢点蚀行为的影响[J]. 中国腐蚀与防护学报, 2019, 39(3): 215-226.
[2]	王海杰, 王佳, 彭欣, 山川. 钛合金在3.5%NaCl溶液中的腐蚀行为[J]. 中国腐蚀与防护学报, 2015, 35(1): 75-80.
[3]	王艳飞,巩建鸣,唐建群,蒋旺,姜莹洁. 冷拔残余应力应变对钢丝氢扩散过程的影响[J]. 中国腐蚀与防护学报, 2011, 31(3): 202-207.
[4]	李凤歧，田冲，曹小明，张劲松. 泡沫SiC/Cu双连续相复合材料在NaCl溶液中的腐蚀行为[J]. 中国腐蚀与防护学报, 2011, 31(2): 111-115.
[5]	孔德军，吴永忠，龙丹，周朝政. 激光冲击处理对X70管线钢焊接接头H₂S应力腐蚀影响[J]. 中国腐蚀与防护学报, 2011, 31(2): 125-129.
[6]	李美栓; 辛丽; 余家康 . 喇曼光谱方法测量金属表面氧化膜的残余应力*[J]. 中国腐蚀与防护学报, 1999, 19(3): 185-188 .
[7]	刘敏;王勇;刘广瑞;唐慕尧;孟繁森. 改善焊接圆管抗应力腐蚀性能的水冷法研究[J]. 中国腐蚀与防护学报, 1998, 18(3): 187-192.

Viewed

Full text

Abstract

Cited

Shared

Discussed