|
|
|
| 电子散斑干涉技术测量304不锈钢点蚀电位 的方法研究 |
| 田文明，杜楠，赵晴 |
| 南昌航空大学无损检测技术教育部重点实验室 南昌 330063 |
|
| ELECTRONIC SPECKLE PATTERN INTERFEROMETRY MEASUREMENT OF 304 STAINLESS STEEL PITTING POTENTIAL |
| TIAN Wenming, DU Nan, ZHAO Qing |
| Key Laboratory of Nondestructive Test, Ministry of Education, Nanchang Hangkong University, Nanchang 330063 |
引用本文:
田文明，杜楠，赵晴. 电子散斑干涉技术测量304不锈钢点蚀电位 的方法研究[J]. 中国腐蚀与防护学报, 2012, 32(5): 431-436.
TIAN Wenming,
DU Nan,
ZHAO Qing.
ELECTRONIC SPECKLE PATTERN INTERFEROMETRY MEASUREMENT OF 304 STAINLESS STEEL PITTING POTENTIAL. Journal of Chinese Society for Corrosion and protection, 2012, 32(5): 431-436.
链接本文:
https://www.jcscp.org/CN/
或
https://www.jcscp.org/CN/Y2012/V32/I5/431
|
| [1] Cao Z F, Qiao L J, Chu W Y, et al. Study on effect factors to pitting potential of 321 stainless steel[J]. J. Chin. Soc.Corros. Prot., 2006, 26(1): 22-26 (曹占锋, 乔利杰, 褚武扬等.321不锈钢点蚀电位影响因素的研究[J]. 中国腐蚀与防护学报, 2006, 26(1):22-26)[2] Hao X C, Su P, Xiao K, et al. Influence of NaCl concentration on corrosion products of weathering steel[J]. J. Chin. Soc. Corros. Prot., 2009, 30(5): 297-299 (郝献超, 苏鹏, 肖葵等. 不同NaCl浓度对耐候钢腐蚀产物的影响[J]. 中国腐蚀与防护学报, 2009, 30(5): 297-299)[3] Qin R J, Lu M, Guo W K, et al. Localized electrochemical scanning study on pitting corrosion of stainless steel in acidic chloride solution[J]. Corros. Sci. Prot. Technol., 2009, 21(3): 230-232 (秦瑞杰, 路敏, 郭未宽等. 酸性氯化物溶液中不锈钢点蚀的局部电化学扫描研究[J]. 腐蚀科学与防护技术, 2009, 21(3): 230-232)}[4] Lu G C, Cheng H D, Xu C C, et al. Effect of strain and chloride concentration on pitting susceptibility for type 304 austenitic stainless steel[J]. Chin. J. Chem. Eng., 2008, 16(2):314-319[5] Poursaee A. Determining the appropriate scan rate to perform cyclic polarization test on the steel bars in concrete[J]. Electrochim. Acta, 2010, 55(3): 1200-1206[6] Wang M F, Du N, Li X G, et al. Monitoring initial pitting corrosion of 45 steel in NaCO3-NaCl solution by ESPI[J]. J.Chin. Soc. Corros. Prot., 2009, 29(3): 210-214 (王梅丰, 杜楠,李晓刚等.利用电子散斑干涉技术研究45碳钢在NaCO3-NaCl溶液中的早期点蚀行为[J].中国腐蚀与防护学报, 2009, 29(3): 210-214)[7] Wang M F. Study on initial pitting corrosion behaviors and mechanisms of metals using electronic speckle pattern interferometry[D]. Beijing: University of Science and Technology Beijing, 2008 (王梅丰. 利用激光电子散斑研究金属点蚀早期腐蚀行为及机理[D]. 北京: 北京科技大学, 2008)[8] China State Bureau. The pitting potential measurement method stainless steel[G]. GB/T 17899-1999. Beijing: Standards Press of China, 1999 (国家标准局. 不锈钢点蚀电位测量方法[G]. GB/T 17899-1999. 北京: 中国标准出版社, 1999) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
