渗硼提高炭材料抗氧化性研究进展

中国腐蚀与防护学报

2012, Vol. 32

Issue (3): 183-188

综合评审

本期目录 | 过刊浏览

渗硼提高炭材料抗氧化性研究进展

任研研,郭宁,吴明铂

中国石油大学(华东)重质油国家重点实验室青岛 266555

RESEARCH PROGRESS OF BORON-DOPING TO IMPROVE ANTIOXIDATION ABILITY OF CARBON MATERIALS

REN Yanyan, GUO Ning, WU Mingbo

State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266555

全文: PDF(501 KB)

摘要: 综述了气体渗硼、液体渗硼和固体渗硼三种主要渗硼方式、各自优缺点及适用范围，分析了微波对炭材料渗硼的促进作用，给出了渗硼提高炭材料抗氧化性的机理，对渗硼技术的今后发展进行了展望。

关键词 ：炭材料, 渗硼, 抗氧化

Abstract：Boron-doping is a useful method to improve the antioxidation ability of carbon materials. Three boron-doping methods including gas boron-doping, liquid boron-doping, and solid boron-doping have been reported in this paper. The application of microwave in boron-doping is also described. The application scope and the mechanism of different boron-doping methods are summarized. Finally, the prospect of boron-doping to increase the antioxidation ability of carbon materials is previewed.

Key words： carbon materials boron-doping antioxidation

收稿日期: 2011-05-04

ZTFLH:

O6-1

基金资助:

教育部新世纪优秀人才支持计划项目(NCET-10-0768)、国家自然科学基金项目(20876176和51172285)、教育部科学技术研究重点项目(109100)、中央高校基本科研业务费专项资金项目(09CX04037A)和山东省博士基金项目(2008BS09013)资助

通讯作者: 吴明铂 E-mail: wmbpeter@yahoo.com.cn

Corresponding author: WU Mingbo E-mail: wmbpeter@yahoo.com.cn

作者简介: 任研研，女，1986年生，硕士，研究方向为多孔炭的抗氧化防护

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	任研研
	郭宁
	吴明铂
44.8K

引用本文:

任研研,郭宁,吴明铂. 渗硼提高炭材料抗氧化性研究进展[J]. 中国腐蚀与防护学报, 2012, 32(3): 183-188.
REN Xing-Xing, GUO Ning, WU Meng-Bo. RESEARCH PROGRESS OF BORON-DOPING TO IMPROVE ANTIOXIDATION ABILITY OF CARBON MATERIALS. J Chin Soc Corr Pro, 2012, 32(3): 183-188.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y2012/V32/I3/183

[1] Wang J G, Guo Q G, Liu L, et al. High temperature adhesives for carbon materials(I)[J]. Ord. Mater. Sci. Eng., 2003,26(2): 63-66
    (王继刚, 郭全贵, 刘朗等. 炭材料的高温粘结剂(I)[J]. 兵器材料科学与工程, 2003, 26(2): 63-66)
[2] Torsten W, Gordon B. Carbon-carbon composites: a summary of recent developments and applications [J]. Mater. Des., 1997,18(1): 11-15
[3] Jian K, Hu H F, Chen C H. High temperature oxidation resistance coatings for carbon-carbon composites[J]. Mater. Prot.,2003, 36(1): 22-24
    (简科, 胡海峰, 陈朝辉.碳/碳复合材料高温抗氧化涂层研究进展[J]. 材料保护, 2003, 36(1):22-24)
[4] Hu X H, Wu M B, Zha Q F. Development of oxidation resistance of carbon/carbon composites at hign temperature[J].Carbon, 2006, (3): 38-45
    (胡兴华, 吴明铂, 查庆芳.炭/炭复合材料抗氧化研究进展[J]. 炭素, 2006, (3): 38-45)
[5] Zhang W G,Cheng H M,Shen Z H, et al. Progress of oxidation resistance of carbon materials[J]. Carbon, 1997,(2): 1-6
    (张伟刚, 成会明, 沈祖洪等. 炭材料抗氧化研究进展[J]. 炭素, 1997, (2):1-6)
[6] Zhang Y G, Wang C Y, Yan P. Modification on carbon dopedwith boron as anode materials for lithium ion secondary battery[J].Chem. Ind. Eng. Prog., 2004, 23(3): 248-251
    (张永刚, 王成扬,闫裴. 锂离子二次电池用负极炭材料的掺硼改性[J]. 化工进展, 2004,23(3): 248-251)
[7] Li G T, Wu G X, Du C W, et al. Antioxidation of graphite electrodes with boride impregnation[J]. Corros. Sci. Prot. Technol.,1999, 11(2): 126-128
    (李广田, 吴国玺, 杜成武等.硼化物抑制石墨电极氧化研究[J]. 腐蚀科学与防护技术, 1999, 11(2):126-128)
[8] Wei M K, Xiao H, Liang A M. Overview on oxidation resistance of carbon materials at high temperature[J]. Jiangsu Ceram., 2003, 36(1): 24-28
    (魏明坤, 肖辉, 梁爱民.炭材料的高温抗氧化研究进展[J]. 江苏陶瓷, 2003, 36(1): 24-28)
[9] Jeong Y, Chung T C M. The synthesis and characterization of a super-activated carbon containing substitutional boron (BCx) and its applications in hydrogen storage[J]. Carbon, 2010, 48:2526-2537
[10] William C, Thomas E P, Carina O, et al. Synthesis and characterization of boron-doped carbons[J]. Carbon, 1995, 33(4):367-374
[11] Burgess J S, Acharya C K, Lizarazo J, et al. Boron-doped carbon powders formed at 1000℃ and one atmosphere[J]. Carbon, 2008,46(13): 1711-1717
[12] Satishkumar B C, Govindaraj A, Harikumar K R, et al.Boron-carbon nanotubes from the pyrolysis of C₂H₂-B₂H₆ mixtures[J]. Chem. Phys. Lett., 1999, 300:473-477
[13] Cao X M, Wen M, Han W X, et al. Effect of rare earth elements on improving boronizing layer[J]. J. Chin. Rare Earth Soc.,1997, 15(4): 350-353
     (曹晓明, 温鸣, 韩文祥等.稀土元素对固体渗硼层的改性作用[J]. 中国稀土学报, 1997, 15(4):350-353)
[14] Watanabe T, Tsuda S, Yamaguchi T, et al. Microwave plasma chemical vapor deposition synthesis of boron-doped carbon nanotube[J]. Physica, 2010, 470(1)C: 608-609
[15] Sogabe T, Okada O, Kuroda K, et al. Improvement in properties and air oxidation resistance of carbon materials by boron oxide impregnation[J]. Carbon, 1997, 35(1): 67-72
[16] Mi Q, Cao L Y, Huang J F, et al. Influence of time on structure and oxidation resistance of carbon/carbon composites modified by microwave hydrothermal process [J]. Chin. J. Inorg.Chem., 2011, 27(3): 457-462
     (弭群, 曹丽云, 黄剑锋等.微波水热时间对C/C复合材料结构和抗氧化性能的影响[J]. 无机化学学报,2011, 27(3): 457-462)
[17] Westwood A V K, Rand B, Lu S. Oxidation resistant carbon materials derived from boronated carbon-silicon alloys[J].Carbon,2004, 42(5): 3071-3080
[18] Xue W G.A study on low temperature solid boronizing agent[J]. Gansu Metall., 1996, 63(1): 20-27
    (薛文功.低温固体渗硼剂的研究[J]. 甘肃冶金, 1996, 63(1): 20-27)
[19] Li H. The forming mechanism of the gaseous boronizing layer voids and the prevention of the formation of the voids[J]. J.Wuhan Food Ind. Coll., 1997, (2): 39-44
    (李辉.气体渗硼孔洞的产生机制及防止方法[J]. 武汉食品工业学院学报, 1997,(2): 39-44)
[20] Yang F, Yang Z D. Study on eutectic melting boriding in salt bath[J]. Hot Working Technol., 2007, 36(16); 56-60
     (杨峰, 杨志德. 盐浴共晶化渗硼工艺研究[J]. 热加工工艺, 2007, 36(16);56-60)
[21] Guo R H, Xu B, Zhang N N. Study status and prospects of low temperature solid boronizing process[J]. Hot Working Technol.,2008, 37(18): 82-85
     (郭仁红, 许斌, 张南南.低温固体渗硼工艺的研究现状及展望[J]. 热加工工艺, 2008, 37(18):82-85)
[22] Ni J R, Ge L L. Research on activation of Na₂SiF₆ in pack boronizer [J]. Heat Treat. Met., 2000, 25(1):30-32
     (倪金荣, 葛利玲. 固体渗硼剂中氟硅酸钠作用的研究[J].金属热处理, 2000, 25(1): 30-32)
[23] Li C X, Zhou X L, Li Z, et al. Development of borax boronizing agent[J]. J. Yunnan Polytech. Univ., 1996, 12(2): 28-34
     (李春信, 周晓玲, 李增等. 硼砂型渗剂的试制[J].云南工业大学学报, 1996, 12(2): 28-34)
[24] Xu B, Feng C B, Lu L Q, et al. Study on the effect of urea in packing boronizing[J]. Heat Treat. Met., 1996, 21(3): 23-26
     (许斌, 冯承明, 吕钊钦等. 尿素对固体渗硼作用的研究[J].金属热处理, 1996, 21(3): 23-26)
[25] Su Z G, Yang Y L, Tian X, et al. Effect of rare earth element on boronization kinetics[J]. J. Jilin Univ., 2010, 40(1):82-86
     (苏振国, 杨永利, 田旭等. 稀土元素对渗硼动力学的影响[J].吉林大学学报(工学版), 2010, 40(1): 82-86)
[26] Ma J C, Wu L Z. A study on solid boronisation promoter[J].J. Inner Mongolia Polytech. Univ., 2000, 19(1): 52-55
     (马锦才, 吴鲁周. 固体渗硼催渗剂研究[J].内蒙古工业大学学报(自然科学版)., 2000, 19(1): 52-55)
[27] Liu D K, Tang J Y, Lu X Y, et al. Color and thermal stability of diamond synthesized by adding boron-containing compounds into graphite powder[J]. Diamond Abrasives Eng., 2007,157(1): 39-43
     (刘党库, 唐敬友, 卢喜瑞等.石墨粉中添加含硼化合物合成金刚石的颜色与热稳定性[J].金刚石与磨料磨具工程, 2007, 157(1): 39-43)
[28] Zha Q F, Hu X H, Guo Y S, et al. Improved antioxidative ability of porous carbons by boron-doping [J]. New Carbon Mater.,2008, 23(4): 356-360
[29] Lee Y J, Uchiyama Y, Radovic L R. Effects of boron doping in low-and high-surface-area carbon powders[J]. Carbon, 2004,42(11): 2233-2244
[30] Fu Q G, Li H G, Wang Y J, et al. B₂O₃ modified SiC-MoSi₂ oxidation resistant coating for carbon/carbon composites by a two-step pack cementation[J]. Corros. Sci., 2009,51: 2450-2454
[31] Zhang Q X, Zhang J H, Wang Y F, et al. Preparation and research on boronized layer in microwave field[J]. J. Wuhan Univ.Technol., 2006, 28(4): 8-10
     (章桥新, 张建红, 王玉伏等.微波场下渗硼层的制备与研究[J]. 武汉理工大学学报, 2006, 28(4): 8-10)
[32] Zhang Q X, Ye W P, Zhang L, et al. Study on temperature property of boriding medium under microwave field[J]. Hot Working Technol., 2007, 36(20): 53-55
     (章桥新, 叶卫平, 张亮等.微波场下渗硼介质的温度特性研究[J]. 热加工工艺, 2007,36(20): 53-55)
[33] Ye W P, Chen W, Zhang Q X. Study on diffusion problem of microwave boriding by Matlab[J]. Hot Working Technol., 2007, 36(6):78-80
     (叶卫平, 陈武, 章桥新. 用Matlab研究微波渗硼扩散问题[J].热加工工艺, 2007, 36(6): 78-80)
[34] Liu G X. Study on the anti-oxidation of carbon/carbon composite[J]. Carbon, 2004, (2): 24-26
     (刘桂香.炭/炭复合材料的抗氧化研究[J]. 炭素, 2004, (2): 24-26)
[35] Wu X X, Radovic L R. Inhibition of catalytic oxidation of carbon/carbon composites by phosphorus[J]. Carbon, 2006, 44(1):141-151
[36] Zhong D H, Sano H, Uchiyama Y. Effect of low-level boron doping on oxidation behavior of polyimide-derived carbon films[J].Carbon, 2000, 38(8): 1199-1206
[37] Hu R, Chung T. C. Synthesis and characterization of novel B/C materials prepared by 9-chloroborafluorene precursor[J]. Carbon,1996, 34(10): 1181-1190
[38] Lee Y J, Radovic L R. Oxidation inhibition effects of phosphorus and boron in different carbon fabrics[J]. Carbon, 2003,41(10): 1987-1997
[39] Thomas J M, Roscoe C. The influence of boron on the reactivity of the graphite crystals[A]. Extended abstract, 2nd Conf on Carbon and Graphite[C]. London, 1965: 249-257.
[40] Lee Y J, Joo H J, Radovic L R. Preferential distribution and oxidation inhibiting/catalytic effects of boron in carbon fiber reinforced carbon (CFRC) composites[J]. Carbon, 2003, 41(13):2591-2600
[41] Radovic L R, Karra M, Skokova K, et al. The role of substitutional boron in carbon oxidation[J]. Carbon, 1998, 36(12):1841-1854

[1]	艾鹏,刘礼祥,李晓罡,姜文涛. TiAlSiN涂层对γ-TiAl基合金抗高温氧化性能的影响[J]. 中国腐蚀与防护学报, 2019, 39(4): 306-312.
[2]	赵娟; 王贵; 刘朗 . SiC/Si-MoSi2/ MoSi2涂层的抗氧化性能[J]. 中国腐蚀与防护学报, 2008, 28(3): 161-165 .
[3]	李美姮; 管恒荣 . 热障涂层的性能评价[J]. 中国腐蚀与防护学报, 2007, 27(5): 309-314 .
[4]	马瑞娜; 曹晓明; 温鸣 . 稀土元素提高渗硼层耐锌液腐蚀性能的研究[J]. 中国腐蚀与防护学报, 2006, 26(3): 180-183 .
[5]	李美恒; 张重远; 孙晓峰 . 真空热处理对镍基单晶高温合金溅射NiCrAlY涂层抗氧化性能的影响[J]. 中国腐蚀与防护学报, 2002, 22(3): 153-157 .
[6]	邓畅光; 邝子奇 . 稀土硅铁对TBCs梯度热障涂层组织与性能影响的研究[J]. 中国腐蚀与防护学报, 2002, 22(3): 176-179 .
[7]	向兴华; 尹钟大; 朱景川 . 激光重熔对等离子喷涂ZrO2-NiCoCrAlY梯度涂层组织与性能的影响[J]. 中国腐蚀与防护学报, 1999, 19(3): 173-178 .
[8]	邓建新;艾兴;丁泽良. Al_2O_3/TiB_2/SiC_w陶瓷材料的高温氧化行为[J]. 中国腐蚀与防护学报, 1997, 17(2): 152-156.
[9]	叶长江;李铁藩;郭建亭;沈嘉年. 含Mo的Ni_3Al-Fe基合金在900-1100℃空气中的氧化行为[J]. 中国腐蚀与防护学报, 1995, 15(2): 100-104.

Viewed

Full text

Abstract

Cited

Shared

Discussed