Please wait a minute...
中国腐蚀与防护学报  2007, Vol. 27 Issue (5): 309-314          
  综述 本期目录 | 过刊浏览 |
热障涂层的性能评价
李美姮;管恒荣
RECENT DEVELOPMENT OF PERFORMANCE VALUATION ON THERMAL BARRIER COATINGS
;
引用本文:

李美姮; 管恒荣 . 热障涂层的性能评价[J]. 中国腐蚀与防护学报, 2007, 27(5): 309-314 .
, . RECENT DEVELOPMENT OF PERFORMANCE VALUATION ON THERMAL BARRIER COATINGS[J]. J Chin Soc Corr Pro, 2007, 27(5): 309-314 .

全文: PDF(358 KB)  
摘要: 热障涂层用于涡轮发动机的热端部件可显著提高其使用温度,延长部件的使用寿命,并提高发动机的效率。文中对热障涂层的力学性能、抗氧化和抗热腐蚀、抗磨蚀和热学特性等性能的评价及性能判断与分析进行了综合回顾。
关键词 : 热障涂层,  隔热效果,  力学性能,  抗氧化,  抗磨蚀    
Abstract:Thermal barrier coatings (TBCs) have been increasingly used to extend the durability of aircraft gas turbine engine.This not only increases components lifetime,but also allows higher engine temperatures and there-fore better efficiency.The performance valuation and analysis was reviewed to the mechanics property,oxidation resistance, hot corrosion resistance, erosion resistance, and thermal property of thermal barrier coatings.
Key words: thermal barrier coatings    thermal barrier effect    mechanical performance    oxidation resistance    ero-sio
收稿日期: 2006-02-20     
ZTFLH:  TG174.45  
[1]Padture N P,Gell M,Jordan E H.Thermal barrier coatings forgas-turbine engine applications[J].Science,2002,296:280-284
[2]Xu H B,Gong S K,Liu F S.Recent development in materialsdesign of thermal barrier coatings for gas turbine[J].Acta Aero-nautica et Astronautica Sinica,2000,21(1):7-12(徐惠彬,宫声凯,刘福顺.航空发动机热障涂层材料体系的研究[J].航空学报,2000,21(1):7-12)
[3]Liu F S,Gong S K,Xu H B.Recent development in thermal bar-rier coatings prepared by EB-PVD[J].Acta Aeronautica et As-tronautica Sinica,2000,21(Supl.):30-34(刘福顺,宫声凯,徐惠彬.大功率EB-PVD陶瓷热障涂层的研究与应用[J].航空学报,2000,21(增刊):30-34)
[4]Li M F,Zhu J C,Xiang X H.et al.Progress in study on ceram-ic/metal high-temperature thermal barrier coatings[J].Mater.Rev.,2000,14(8):19-21(李明伟,朱景川,向兴华等.陶瓷/金属高温热障涂层研究进展[J].材料导报.2000,14(8):19-21)
[5]Zeng Z H,Guo Z,Wu S J.Functionally gradient material and itsdevelopment status and trend[J].Missiles and Space Vehicles,1996,220:60-67(曾昭焕,郭正,巫世杰.梯度功能材料及其研究现状与发展趋势[J].导弹与航天运载技术,1996,220:60-67)
[6]Hu C S,Wang F H,Wu W T.Review of progress in thermal bar-rier coatings[J].Corro.Sci.Prot.Technol.,2000,12(3):160-163(胡传顺,王福会,吴维.热障涂层研究进展[J].腐蚀科学与山文防护技术,2000,12(3):160-163)
[7]Dapkunas S J.Measurement methods and standards for processingand application of thermal barrier coatings[J].J.Thermal SprayTechnol.,1997,6(1):67-76
[8]BerndtCC.Tensileadhesiontestingmethodologyforthermallysprayedcoatings[J].J.Mater.Eng.,1990,12:151-158
[9]Berndt C C,Lin C K.Measurement of adhesion for thermally sprayedmaterials[J].J.Adhes.Sci.Technol.,1993,7:1235-1264
[10]Lhermitte-Sebire I,Colmet R,Naslain R.The adhesion betweenphysically vapour-deposited or chemically vapour-deposited alumi-na and TiC-coated cemented carbides as characterized by Augerelectron spectroscopy and scratch testing[J].Thin Solid Films,1986,138:221-233
[11]Steinmann P A,Tardy Y,Hintermann H E.Adhesion testing bythe scratch test method:The influence of intrinsic and extrinsic pa-rameters on the critical load[J].Thin Solid Films,1987,154:333-349
[12]Burnett P J,Rickerby D S.The relationship between hardnessand scratch adhesion[J].Thin Solid Films,1987,154:403-416
[13]Bull S J.Failure modes in scratch adhesion testing[J].Surf.Coat.Technol.,1991,50:25-32
[14]Jindal P C,Quinto D T,Wolfe G J.Adhesion measurements ofchemically vapor deposited and physically vapor deposited hardcoatings on WC-Co substrates[J].Thin Solid Films.1987,154:361-375
[15]Loubet J L.Boron-carbide coatings-correlation between mechan-ical-properties and LPCVD parameters values[A].In:Proc.16thLeeds-Lyon Symp.[C].On Tribo.,Dowson D,Taylor C M,GodetM,eds.,held at the Inst.Nation.Des Sci.Appl.,Lyon,France,1989,429
[16]Oliver W C,Pharr G M.An improved technique for determininghardness and elastic-modulus using load and displacement sensingindentation experiments[J].J.Mater.Res.,1992,7:1564-1583
[17]Marshall D B,Noma T,Evans A G.A simple method for deter-mining elastic-modulus to hardness ratios using Knoop indentationmeasurements[J].J.Am.Ceram.Soc.,1982,65:C175-176
[18]Fawcett N.A novel method for the measurement of Young's mod-ulus for thick-film resistor material by flexural testing of coatedbeams[J].Mater.Sci.Technol.,1998,9:2023-2026
[19]Chantikul P,Anstis G R,Lawn B R,et al.A critical evaluationof indentation techniques for measuring fracture toughness 2.Strength method[J].J.Am.Ceram.Soc.,1981,64:539-543
[20]Anstis G R,Chantikul P,Lawn B R,et al.A critical evaluationof indentation techniques for measuring fracture toughness 1.Directcrack measurements[J].J.Am.Ceram.Soc.,1981,64:533-538
[21]Shih T T.An evaluation of the chevron V-notched bend bar frac-ture toughness specimen[J].Engingeering Fracture Mechanics,1981,14(4):821-828
[22]Williams D P,Evans A G.A simple method for studying slow crackgrowth[J].J.Test.Eval.,1973,1(4):264-270
[23]Reece M J,Guiu F,Sammur M F R.Cyclic fatigue crack propa-gation in alumina under direct tension compression loading[J].J.Am.Ceram.Soc.,1989,72(2):348-352
[24]Suresh S.Mechanics and micromechanisms of fatigue crack-growthin brittle solids[J].Int.J.Fracture,1990,42(1):41-56
[25]ASTMStandard E399-74:Standard Method ofTest for Plane-StrainFracture Toughness of Metallic Materials[S].American Society ofTesting Materials,1974
[26]Simpson L A.Use of the notched-beam test for evaluation of frac-ture energies of ceramics[J].J.Am.Ceram.Soc.,1974,57:151-154
[27]GB4161-84:Chinese National Standard.Test Method forPlane-strain Fracture Toughness[S].Beijing:Standards Press ofChina,1985(GB4161-84.金属材料平面应变断裂韧度试验方法[S].北京:中国标准出版社,1985)
[28]Li M H,Sun X F,Gong S K,et al.Studies of microstructure andphase of EB-PVD TBCs exposed to elevated temperatures[J].J.Chin.Soc.Corros.Prot.,2002,22(2):105-110(李美女亘,孙晓峰,宫声凯.EB-PVD热障涂层高温氧化过程中的显微结构和相分析[J].中国腐蚀与防护学报,2002,22(2):105-110)
[29]Li M H,Zhang Z Y,Sun X F,et al.Oxidation behavior of sput-tered NiCrAlY coating[J].Surf.Coat.Technol.,2003,165:241-247
[30]Li M H,Zhang Z Y,Sun X F,et al.Oxidation and degradation ofEB-PVD thermal-barrier coatings[J].Oxidation of Metals,2002,58(5/6):499-512
[31]Li M H,Sun X F,Gong S K,et al.Phase transformation andbond coat oxidation behavior of EB-PVD thermal barrier coating[J].Surf.Coat.Technol.,2004,176:209-214
[32]Wu Y N,Wang F H,Huang W,et al.Oxidation behavior ofthermal barrier coatings obtained by detonation spraying[J].Surf.Coat.Technol.,2003,166:189-194
[33]Tolpygo V K,Clarke D R.Morphological evolution of thermal bar-rier coatings induced by cyclic oxidation[J].Surf.Coat.Technol.,2003,163-164:81-86
[34]Zhang D B,Gong S K,Xu H B,et al.Thermal cycling behaviorsof TBC on intermetallic Ni3Al based superalloy[J].Surf.Coat.Technol.,2003,168:78-83
[35]Miller R A,Lissler G W,Jobe J M.A hot dynamic seal rig formeasuring hypersonic engine seal durability and flow performancetechnical[J].NASA Lewis Research Center,1993,3295
[36]Jones R L.Experiences in seeking stabilizers for zirconia havinghot corrosion-resistance and high temperature tetragonal(t')sta-bility[P].NRL/MR/6170-96-7841,1996
[37]Roark R J,Young W C.Formulas for Stress and Strain[M].NewYork:McGraw-Hill Book Company,1982:516
[38]Rhys-Jones T,Toriz F C.Thermal barrier coatings for turbine ap-plications in aero engines[J].High Temperature Technology,1989,7(2):73-81
[39]Tabakoff W.Investigation of coatings at high temperature for usein turbomachinery[J].Surf.Coat.Technol.,1989,39/40:97-115
[40]Hanschuh R F.High temperature erosion of plasma sprayed par-tially stabilized zirconia in a simulated turbine environment[J].NASA,TP2406,Dec.1984
[41]Toriz F C,Thakker A B,Gupta S K.Thermal barrier coatings forjet engines[J].ASME,88-GT-279
[42]Davis A G,Boone D H,Levy AV.Erosion of ceramic thermalbarrier coatings[J].Wear,1986,110(2):101-116
[43]Eaton H E,Novak R C.Particulate erosion of plasma sprayed porousceramic[J].Surf.Coat.Technol.,1987,30:41-50
[44]Nicholls J R,Jaslier Y,Rickerby D S.Erosion and foreign objectdamage of thermal barrier coatings[J].Mater.Sci.Forum,1997,251-254:935-948
[45]Andersson C A,Lau S K,et al.Advanced ceramic coating devel-opment for industrialatility gas turbine applications[A].NASACR-165619,Final Report[C].1982:12
[46]Zhu D,Miller R A,Nagaraj B A,et al.Thermal conductivity ofEB-PVD thermal barrier coatings evaluated by a steady-state laserheat flux technique[J].Surf.Coat.Technol.,2001,138:1-8
[1] 许佳程, 刘家兵, 黄诗雨, 金灵好, 谭伟, 郭娜, 刘涛. 人工极地海域环境致EH40船板钢的力学性能损伤与应力腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(5): 1437-1451.
[2] 李晓峰, 李艳茹, 卢云飞, 张泰华, 常雪婷, 安燕. 力学与防腐性能协同增强的聚吡咯改性芳纶纤维/环氧复合涂料[J]. 中国腐蚀与防护学报, 2026, 46(5): 1517-1526.
[3] 黄涛, 朱宇, 邓宇, 王岐山, 田一晨, 陈旭. 氢对X65钢及其焊缝力学性能及腐蚀行为影响[J]. 中国腐蚀与防护学报, 2026, 46(4): 1107-1116.
[4] 庞钰, 张文艳, 庞榆, 王锡伟, 汪凤, 凌涛强, 李文坡. 环境及防腐层特性对集输管道外腐蚀的影响规律[J]. 中国腐蚀与防护学报, 2026, 46(4): 1249-1256.
[5] 贺佳, 李欢, 覃世军, 芦伟, 汪卫华, 储德林. 高温流动液态锂铅对氧化物弥散强化钢的长时间腐蚀行为研究[J]. 中国腐蚀与防护学报, 2026, 46(3): 911-918.
[6] 刘海龙, 王力, 赵卫国, 韩嘉彧, 王轻松, 龙佳怡, 贺星, 高黎黎, 王华, 胡平. 钼合金表面Si-ZrB2-Ti-Cr多元涂层的激光熔覆制备及高温抗氧化性能[J]. 中国腐蚀与防护学报, 2026, 46(1): 155-164.
[7] 孙欣蕾, 曹京宜, 殷文昌, 方志刚, 王峰, 王兴奇, 杨延格. 高温高湿环境下玻璃纤维增强乙烯基酯复合材料的失效行为研究[J]. 中国腐蚀与防护学报, 2025, 45(6): 1679-1688.
[8] 龙佳怡, 王力, 赵卫国, 韩嘉彧, 王轻松, 刘海龙, 高黎黎, 胡平, 冯鹏发. 料浆法聚乙烯醇缩丁醛添加量对钼合金硅化物涂层微观结构及抗氧化性能的影响[J]. 中国腐蚀与防护学报, 2025, 45(6): 1717-1724.
[9] 佟向瑜, 徐玮辰, 王秀通, 王优强, 段继周. 常用钛合金焊接接头显微组织结构及对材料性能的影响[J]. 中国腐蚀与防护学报, 2025, 45(5): 1161-1174.
[10] 李琰琰, 李帅, 董超, 李冬强, 鲍泽斌, 朱圣龙. 大气等离子热障涂层体系在900 ℃含水蒸气和NaCl环境下的腐蚀行为[J]. 中国腐蚀与防护学报, 2025, 45(5): 1233-1243.
[11] 耿浩钧, 谢芳坤, 杨凌旭, 王艳丽, 刘会军, 曾潮流. (La0.2Nd0.2Tm0.2Yb0.2Lu0.2)2Zr2O7 高熵陶瓷的制备及其在熔融氧化物膜CaO-MgO-Al2O3-SiO2 下的腐蚀行为[J]. 中国腐蚀与防护学报, 2025, 45(5): 1244-1252.
[12] 王昆, 邹兰欣, 郭磊, 闫凯, 叶福兴, 刘洪丽, 郭洪波. 航空发动机及燃气轮机热障涂层高温腐蚀与防护[J]. 中国腐蚀与防护学报, 2025, 45(1): 1-19.
[13] 张晗, 刘轩溱, 黄爱辉, 赵晓峰, 陆杰. 热障涂层金属粘结层制备与研究进展[J]. 中国腐蚀与防护学报, 2025, 45(1): 20-32.
[14] 董子烨, 吴毅恒, 卢翀, 沈朝, 曾小勤. 固体氧化物燃料电池金属连接体研究进展[J]. 中国腐蚀与防护学报, 2025, 45(1): 46-60.
[15] 朱慧文, 郑黎, 张昊, 于宝义, 崔志博. Be对WE43镁合金高温氧化行为及阻燃性的影响[J]. 中国腐蚀与防护学报, 2024, 44(4): 1022-1028.