|
|
|
| CORROSION BEHAVIOR OF DIFFERENT MATERIALS IN SULFUR-BEARING SOLUTION |
| ;; |
| 西安理工大学 |
|
Cite this article:
. CORROSION BEHAVIOR OF DIFFERENT MATERIALS IN SULFUR-BEARING SOLUTION. J Chin Soc Corr Pro, 2007, 27(2): 65-69 .
|
|
|
Abstract The corrosion behaviors of 45# carbon steel,1Cr18Ni9Ti,304 stainless steel,and Ni-P alloy coatings in sulfur-bearing solution were studied by potentiostatic polarization method and gravimetric method.The results showed that at lower temperatures,the effect of sulfur concentration on cathode polarization and anodic polarization of four kinds of materials is weak.The polarization curves of 1Cr18Ni9Ti and 304 stainless steel are similar,their polarizations both are typical electrochemical corrosion course,and their self-corrosion potential and self-corrosion current are similar too.Passivation appears in Ni-P alloy coatings,and diffusion controlled by anode appears in 45# carbon steel.As the temperature increases,the corrosion rate increases,and the polarization rates of 1Cr18Ni9Ti and 304 stainless steel rise,whereas the passivation of Ni-P alloy coatings weakens.1Cr18Ni9Ti,304 stainless steel and Ni-P alloy coatings are corrosion resistance materials in sulfur-bearing solution.
|
|
Received: 27 April 2006
|
|
|
[1]Bu Q M,Wen L,Jiang H,et al.On high-sulfur crude oil inducedcorrosion of processing equipment and countermeasures[J].Corros.Sci.Prot.Technol.,2002,14(6):362-364(卜全民,温力,姜虹等.炼制高硫原油对设备的腐蚀与安全对策[J].腐蚀科学与防护技术,2002,14(6):362-364)
[2]Cui KQ.Safety Engineering in Chemical Industry Process[M].Bei-jing:Chemical Industry Press,2002(崔克清主编.化工过程安全工程[M].北京:化学工业出版社,2002)
[3]Feng L J,Ma X J,Lei A L.Corrosion resistance of electrolessly plat-ing Ni-P alloy coating in sulfur-bearing solution[J].J.Chin.Soc.Corros.Prot.,2006,26(3):157-159(冯拉俊,马小菊,雷阿利.含硫介质中化学镀Ni-P合金镀层耐蚀性研究[J].中国腐蚀与防护学报,2006,26(3):157-159)
[4]Zhou P R,Jia P L,Xu S Q,et al.Corrosion protection technologies inprocessing crude oils[J].Total Corrosion Control,2003,17(3):6-7(周培荣,贾鹏林,许适群等.加工高硫原油与高酸原油的防腐蚀技术[J].全面腐蚀控制,2003,17(3):6-7)
[5]Huang L P.A tentative analysis of sulfide corrosion and protectingtechnology during processing sour crude oil[J].Jinshan Oil Chemi-cal Fibre,2002,21(1):45-50(黄丽萍.含硫原油加工中的硫化物腐蚀与防护技术探悉[J].金山油化纤,2002,21(1):45-50)
[6]Qin X J,Shao G J.Study on the initial electro-deposition behaviorof Ni-P alloy[J].J.Chin.Soc.Corros.Prot.,2004,24(1):6-9(秦秀娟,邵光杰.电沉积Ni-P合金初期沉积行为的研究[J].中国腐蚀与防护学报,2004,24(1):6-9)
[7]Guan K S,Wang X Y,Wang Z W.Anti Scc behavior of Ni-P elec-troless coating on 304L steel welding joint[J].J.Chin.Soc.Corros.Prot.,1999,19(6):333-338(关凯书,王晓燕,王志文.Ni-P化学镀层对304L钢焊接接头的应力腐蚀的影响[J].中国腐蚀与防护学报,1999,19(6):333-338)
[8]Wang TY,Xu H B,et al.Corrosion resistance of electroless Ni-Palloy coatings in seawater[J].Corros.Sci.Prot.Technol.,2001,13:458-460(王廷勇,徐海波等.化学镀Ni-P合金镀层在海水中的耐蚀性[J].腐蚀科学与防护技术,2001,13(增刊):458-460)
[9]Li Y,Xie F Q,Wu X Q.Corrosion property evaluation of four coat-ings under the simulated oil field environment[J].Plat.Finish.,2005,27(40):29-32(李岩,谢发勤,吴向清.四种涂层在模拟油田环境下的腐蚀性能评价[J].电镀与精饰,2005,27(4):29-32) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
