Please wait a minute...
J Chin Soc Corr Pro  2012, Vol. 32 Issue (2): 127-132    DOI:
Current Issue | Archive | Adv Search |
EFFECT OF ALLOY ELEMENTS ON ELECTROCHEMICAL PERFORMANCE OF ALUMINUM SACRIFICIAL ANODE
LI Weili1,2, YAN Yonggui2, CHEN Guang1, MA Li2
1. Department of Materials Science of Engineering, Nanjing University of Science and Technology, Nanjing 210094
2. State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute, Qingdao 266101
Download:  PDF(1677KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Elements such as Mg, Ti, Ga, Mn and Sn were added to the Al-Zn-In based ternary anode in order using alloying method and the aluminum sacrificial anodes with different incorporated elements were cast. The electrochemical performance test, polarization plots and scanning electron microscope technique were carried out to analyze the influence of several familiar elements to the performance of the aluminum anode. The experiment results indicated that with the increase of the adding element the anode electrochemical performance was improved. When the elements of Mg and Ti were added to Al-Zn-In ternary anode the dissolution morphology was more uniform. When Ga and Sn were added, the anode open-circuit potential and closed-circuit potential were more negative. When Mn was added, the current efficiency was promoted.
Key words:  alloying elements      dissolution morphology      current efficiency      potential     
Received:  30 November 2010     
ZTFLH: 

TG146.21

 

Cite this article: 

LI Weili, YAN Yonggui, CHEN Guang, MA Li. EFFECT OF ALLOY ELEMENTS ON ELECTROCHEMICAL PERFORMANCE OF ALUMINUM SACRIFICIAL ANODE. J Chin Soc Corr Pro, 2012, 32(2): 127-132.

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2012/V32/I2/127

[1] Salinas D R, Bessone J B. Electrochemical behavior of Al-5%Zn-0.1%Sn sacrificial anode in aggressive media[J].Corrosion, 1991, 47(9): 665-674

[2] Gurrappa J, Karnik J A. The effect on tin-activated aluminum-alloy anodes of the addition of bismuth[J]. Corros. Prev.Contr., 1994, 41(5): 117-121

[3] Baebucci A, Cerisola G, Bruzzone G, et al. Activation of aluminum anodes by the presence of intermetallic compounds[J].Electrochim. Acta, 1997, 42(15): 2369-2380

[4] Qi G T, Guo Z H, Wei B K, et al. The effect of water quenching on microstructure and electrochemistry performance of Al-Zn-In-Sn-Mg anode[J]. Trans. Met. Heat Treat., 2000, 21(4): 68-72

    (齐公台,郭稚弧,魏伯康等.固溶处理对Al-Zn-In-Sn-Mg阳极组织与电化学性能的影响[J].金属热处理学报, 2000, 21(4): 68-72)

[5] Zhang X Y, Huo S Z, Wang Y X. The effect of alloy elements on the property of Al-Zn-In-Ga sacrificial anode[J]. Mater. Prot.,1996, 29(2): 3-5

    (张信义, 火时中, 王元玺.合金元素对Al-Zn-In-Ga合金牺牲阳极性能的影响[J]. 材料保护, 1996,29(2): 3-5)

[6] Guo Z C, Song Y H, Geng W D. High performance Al-Zn-In series sacrificial anode materials[J]. Mater. Mech. Eng., 2005,29(12): 38-41

    (郭忠诚, 宋曰海, 耿卫东.铝-锌-铟系列高性能牺牲阳极料的研究[J]. 机械工程材料, 2005, 29(12):38-41)

[7] Qu J E, Qi G T, Zhang L. Effect of RE and solution treatment on electrochemical performance of aluminum anodes[J].Corros. Sci. Prot. Technol., 2002, 14(3): 169-171

    (屈钧娥,齐公台, 张磊. 稀土元素和固溶处理对Al 阳极电化学性能的影响[J].腐蚀科学与防护技术, 2002, 14(3): 169-171)

[8] Yuan C J, Liang C H, An X W. Effect of Ga on electrochemical properties of Al-Zn-In sacrificial anodes[J]. J.Dalian Univ. Technol., 2004, 44(4): 502-505

    (袁传军, 梁成浩,安晓雯. Ga对Al-Zn-In合金牺牲阳极电化 学性能影响[J].大连理工大学学报, 2004, 44(4): 502-505)

[9] Munoz A G, Saidman S B, Bessone J B. Corrosion mechanism of Al-Zn-In alloys in chloride solutions[J]. Latin Am. Appl. Res.,2003, 33: 275-280

[10] Reboul M C, Gimenez P H, Rameau J J. A proposed activation mechanism for Al anodes[J]. Corrosion, 1984, 40(7):366-371

[11] Aragon E, Cazenave V L, Lanza E, et al. Electrochemical behavior of binary Al-Ga and ternary Al-Zn-Ga alloys as function of thermodynamic properties[J]. Bri. Corros. J., 1997, 32(2): 121-125

[12] Sato F, Newman R C. Mechanism of activation of aluminum by low-melting point elements: part 2-Effect of zinc on activation of aluminum in pitting corrosion[J]. Corrosion, 1999, 55(1): 3-9

[13] Muller L L, Galvele J R. Pitting potential of high purity binary aluminium alloys-II. Al-Mg and Al-Zn alloys[J]. Corros. Sci.,1977, 17: 995-1007

[14] Alvarez O, Gonzalez C, Aramburo G, et al. Characterization and prediction of microstructure in Al-Zn-Mg alloys[J]. Mater. Sci. Eng., 2005, 402A: 320-324

[15] Sina H, Emamy M, Saremi M, et al. The influence of Ti and Zr on electrochemical properties of aluminum sacrificial anodes[J]. Mater. Sci. Eng., 2006, 431A: 263-276

[16] Pan Y, Sun G X. Morphology control of iron phase and its effect on properties of Al alloys[J]. Spe. Cast. Nonferrous alloys,1993, 5: 1-3

     (潘冶, 孙国雄.铝合金中铁相形态控制及对性能的影响[J].特种铸造及有色合金, 1993, 5:1-3)

[17] Gurrappa I. The surface free energy and anode efficiency of aluminium alloys[J]. Corros. Prev. Contr., 1993, 43: 111-114

[18] Li Z Y, Yi L, Liu Z H, et al. The activation mechanism of Al alloys with tin and gallium in alkaline electrolytes[J].Electrochemistry, 2001, 7(3): 316-320

     (李振亚,易玲,刘稚蕙等.含镓、锡的铝合金在碱性溶液中的活化机理[J].电化学, 2001, 7(3):316-320)
[1] ZHOU Yu, ZHANG Haibing, DU Min, MA Li. Effect of Cathodic Potentials on Hydrogen Embrittlement of 1000 MPa Grade High Strength Steel in Simulated Deep-sea Environment[J]. 中国腐蚀与防护学报, 2020, 40(5): 409-415.
[2] ZHU Lixia, JIA Haidong, LUO Jinheng, LI Lifeng, JIN Jian, WU Gang, XU Congmin. Effect of Applied Potential on Stress Corrosion Behavior of X80 Pipeline Steel and Its Weld Joint in a Simulated Liquor of Soil at Lunnan Area of Xinjiang[J]. 中国腐蚀与防护学报, 2020, 40(4): 325-331.
[3] WANG Tingyong, DONG Ruyi, XU Shi, WANG Hui. Electrochemical Properties of Graphene Modified Mixed Metal Oxide Anodes of Ti/IrTaSnSb-G in NaCl Solutions at Low Temperature[J]. 中国腐蚀与防护学报, 2020, 40(3): 289-294.
[4] QIN Yueqiang, ZUO Yong, SHEN Miao. Corrosion Inhibition of 316L Stainless Steel in FLiNaK-CrF3/CrF2 Redox Buffering Molten Salt System[J]. 中国腐蚀与防护学报, 2020, 40(2): 182-190.
[5] DING Guoqing,LI Xiangyang,ZHANG Bo,YANG Zhaohui,HUANG Guiqiao,YANG Haiyang,LIU Kaiji. Variation of Free Corrosion Potential of Several Metallic Materials in Natural Seawater[J]. 中国腐蚀与防护学报, 2019, 39(6): 543-549.
[6] Guirong WANG,Yawei SHAO,Yanqiu WANG,Guozhe MENG,Bin LIU. Effect of Applied Cathodic Protection Potential on Cathodic Delamination of Damaged Epoxy Coating[J]. 中国腐蚀与防护学报, 2019, 39(3): 235-244.
[7] Yue QIAO, Zhiping ZHU, Lei YANG, Zhifeng LIU. Monitoring and Simulated Experiments of Oxidation-Reduction Potential of Boiler Feedwater at High Temperatures[J]. 中国腐蚀与防护学报, 2018, 38(5): 487-494.
[8] Tingyong WANG,Lanying MA,Xiangchen WANG,Haibing ZHANG,Kai CHEN,Yonggui YAN. Investigation of Cathodic Protection Parameters of Candi-date Materials of Condenser for a Nuclear Power Station and Its Application in Seawater[J]. 中国腐蚀与防护学报, 2016, 36(6): 624-630.
[9] Qingqing SUN,Wenhui ZHOU,Yuehuang XIE,Pengxuan DONG,Kanghua CHEN,Qiyuan CHEN. Effect of Trace Chloride and Temperature on Electrochemical Corrosion Behavior of 7150-T76 Al Alloy[J]. 中国腐蚀与防护学报, 2016, 36(2): 121-129.
[10] CHEN Yu, CHEN Xu, LIU Tong, WANG Guanfu, WANG Yanliang. Effect of Potential on Electrochemical Corrosion Behavior of 316L Stainless Steel in Borate Buffer Solution[J]. 中国腐蚀与防护学报, 2015, 35(2): 137-143.
[11] WANG Xueying, WANG Jia, LIU Zaijian, DING Jian, WANG Haijie. Local Electrochemical Probe for Detecting Coating Defects on Inner Wall of Metal Can in Atmosphere[J]. 中国腐蚀与防护学报, 2015, 35(2): 169-176.
[12] ZHAO Guoqiang, WEI Yinghua, LI Jing. Current Efficiency and Corrosion Mechanism of Al-Zn-In Sacrificial Anode at Different Current Densities[J]. 中国腐蚀与防护学报, 2015, 35(1): 69-74.
[13] HAI Zhengyin, WANG Hui, CAO Linyuan, HU Yong. Effect of Pt Deposit on Corrosion Behavior of 316LN in Simulated Primary Loop Water Environment of Pressurized Water Reactor[J]. 中国腐蚀与防护学报, 2014, 34(3): 253-256.
[14] LIANG Hu, DU Min, ZHANG Youhui. Polarization Performance of Two Aluminium AlloySacrificial Anodes[J]. 中国腐蚀与防护学报, 2014, 34(2): 153-159.
[15] ZHOU Jing, FENG Zhiyong, ZHANG Jinling, WANG Shebin. Effect of Nd Addition on Corrosion Resistance of AM60 Magnesium Alloy[J]. 中国腐蚀与防护学报, 2014, 34(2): 185-191.
No Suggested Reading articles found!