Please wait a minute...
中国腐蚀与防护学报  2006, Vol. 26 Issue (1): 59-64     
  综述 本期目录 | 过刊浏览 |
金属表面硅烷化防护处理及其研究现状
刘倞;胡吉明;张鉴清;曹楚南
浙江大学化学系
Progress in Anti-corrosive Treatment of Metals by Silanization
Liang Liu;Jiming Hu;Jianqing Zhang;Chunan Cao
浙江大学化学系
全文: PDF(272 KB)  
摘要: 综述了一种新型的金属表面防护处理技术——硅烷化处理的研究现状.对硅烷膜的制备工艺、表征及膜覆盖电极的性能进行了详细介绍.文中也同时探讨 了硅烷溶液的水解与失效问题,这两个基础问题的研究有助于了解金属表面硅烷膜的形成,并对制备工艺的优化起到决定性作用.最后还介绍了更具发展潜力的电沉积制备硅烷膜技术并提出了展望.
关键词 硅烷防腐蚀工艺水解与失效    
Abstract:A novel protective surface treatment of metals by silanization is reviewed.Studies on preparation and characterization of silane films,the performance of silanized electrodes was presented.Two fundamental problems—hydrolysis and failure of silane solution,which can help us get insight in the properties of silane film on metal substrates and have crucial effect on optimizing the preparation of it,are discussed as well.The more promising electrodeposition of silane films and prospects are also presented.
Key wordssilane    corrosion protection    processes    hydrolysis and failure
收稿日期: 2004-09-01     
ZTFLH:  TG178  
通讯作者: 刘倞     E-mail: kejmhu@zju.edu.cn
Corresponding author: Liang Liu     E-mail: kejmhu@zju.edu.cn

引用本文:

刘倞; 胡吉明; 张鉴清; 曹楚南 . 金属表面硅烷化防护处理及其研究现状[J]. 中国腐蚀与防护学报, 2006, 26(1): 59-64 .
Liang Liu, Jiming Hu, Jianqing Zhang, Chunan Cao. Progress in Anti-corrosive Treatment of Metals by Silanization. J Chin Soc Corr Pro, 2006, 26(1): 59-64 .

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2006/V26/I1/59

[1]Franquet A,Le Pen C,Terryn H.Effect of bath concentration andcuring time on the structure of non-functional thin organosilanelayers on aluminium[J].Electrochim.Acta,2003,48:1245
[2]Beari F,Brand M,Jenkner P.Organofunctional alkoxysilanes in di-lute aqueous solution:new accounts on the dynamic structural muta-bility[J].J.Organomet.Chem.,2001,625:208
[3]Subramanian V,Van Ooij W J.Silane based metal pretreatments asalternatives to chromating[J].Surf.Eng.,1999,15:168
[4]Franquet A,J De Laet,Schram T.Determination of the thickness ofthin silane films on aluminium surfaces by means of spectroscopicellipsometry[J].Thin Solid Films,2001,384:37
[5]Sundararajan G P,Van Ooij W J.Silane based pretreatments for au-tomotive steels[J].Surf.Eng.,2000,16:315
[6]Van Ooij W J,Zhu D.Electrochemical impedance spectroscopy ofbis-[triethoxysilylpropyl]tetrasulfide on Al 2024-T3 substrates[J].Corrosion,2001,57:413
[7]Abel M,Watts J F,Digby R P.The adsorption of alkoxysilanes onoxidised aluminium substrates[J].Inter.J.Adhes.&Adhes.,1998,18:179
[8]Van Ooij W J,Zhu D,Prasad G.Silane based chromate replace-ments for corrosion control,paint adhesion,and rubber bonding[J].Surf.Eng.,2000,16:386
[9]Bertelsen C M,Boerio F J.Linking mechanical properties of silanesto their chemical structure:an analytical study ofγ-APS solutionsand films[J].Prog.Org.Coat.,2001,41:239
[10]Tang N,Van Ooij W J,Górecki G.Comparative EIS study of pre-treatment performance in coated metals[J].Prog.Org.Coat.,1997,30:255
[11]Harun M K,Lyon S B,Marsh J A.Surface analytical study of func-tionalised mild steel for adhesion promotion of organic coatings[J].Prog.Org.Coat.,2003,46:21
[12]Shacham R,Avnir D,Mandler D.Electrodeposition of methylatedsol-gel films on conducting surfaces[J].Adv.Mater.,1999,11:384
[13]Sheffer M,Groysman A,Mandler D.Electrodeposition of sol-gelfilms on Al for corrosion protection[J].Corros.Sci.,2003,45:2893
[14]Conde A,Durán A,De Damborenea J J.Polymeric sol-gel coat-ings as protective layers of aluminium alloys[J].Prog.Org.Coat.,2003,46:288
[15]Zhu D,Van Ooij W J.Enhanced corrosion resistance of AA 2024-T3 and hot-dip galvanized steel using a mixture of bis-[tri-ethoxysilylpropyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine[J].Electrochim.Acta,2004,49:1113
[16]Zhu D,Van Ooij W J.Corrosion protection of metals by water-based silane mixtures of bis-[trimethoxysilylpropyl]amine andvinyltriacetoxysilane[J].Prog.Org.Coat.,2004,49:42
[17]Que W X,Sun Z,Zhou Y.Preparation of hard optical coatingsbased on an organic/inorganic composite by sol-gel method[J].Mater.Lett.,2000,42:326
[18]Que W X,Zhang Q Y,Chan Y C.Sol-gel derived hard opticalcoatings via organic/inorganic composites[J].Compos.Sci.Tech-nol.,2003,63:347
[19]Subramanian V,Van Ooij W J.Effect of amine functional group oncorrosion rate of iron coated with films of organofunctional silanes[J].Corrosion,1998,54:204
[20]Franquet A,Terryn H,Vereecken J.Composition and thickness ofnon-functional organosilane films coated on aluminium studied bymeans of infra-red spectroscopic ellipsometry[J].Thin SolidFilms,2003,441:76
[21]Hu J M,Liu L,Zhang J T.Studies of protective treatment on alu-minium alloys by BTSE silane agent[J].Acta Metall.Sin.,2004,40:1189(胡吉明,刘亻京,张金涛.铝合金表面BTSE硅烷化处理研究[J].金属学报,2004,40:1189)
[22]Hu J M,Liu L,Zhang J Q.Effects of electrodeposition potential onthe corrosion properties of bis-1,2-[triethoxysilyl]ethane filmson aluminum alloy[J].Electrochim.Acta,in press
[23]Hu J M,Liu L,Zhang J Q.Studies of electrodeposition and corro-sion protection of DTMS films on aluminum alloys[J].Chem.J.Chin.U.,in press(胡吉明,刘亻京,张鉴清.铝合金表面电化学沉积制备DTMS硅烷膜及其耐蚀性研究[J].高等学校化学学报,待发表)
[24]Zhu D,Van Ooij W J.Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in neutral sodium chlo-ride solution.Part 1:corrosion of AA 2024-T3[J].Corros.Sci.,2003,45:2177
[25]Palanivel V,Zhu D,Van Ooij W J.Nanoparticle-filled silane filmsas chromate replacements for aluminium alloys[J].Prog.Org.Coat.,2003,47:384
[26]Bexell U,Olsson M.Characterization of a non-organofunctionalsilane film deposited on Al,Zn and Al-43.4Zn-1.6Si alloy-coated steel[J].Surf.Interface Anal.,2001,31:212
[27]Bexell U,Olsson M.Time-of-flight SIMS characterization ofhydrolysed organofunctional and non-organofunctional silanes de-posited on Al,Zn and Al-43.4Zn-1.6Si alloy-coated steel[J].Surf.Interface Anal.,2003,35:880
[28]Quinton J S,Dastoor P C.Modelling the observed oscillations inthe adsorption kinetics of propyltrimethoxysilane on iron and alu-minium oxide surfaces[J].Surf.Interface Anal.,2000,30:25
[29]Quinton J S,Dastoor P C.Conformational dynamics ofγ-APS onthe iron oxide surface:an adsorption kinetic study using XPS and Tof-SIMS[J].Surf.Interface Anal.,2000,30:21
[30]Quinton J S,Thomsen L,Dastoor P C.Adsorption of organosilaneson iron and aluminium oxide surfaces[J].Surf.Interface Anal.,1997,25:931
[31]Xu Y,Tang S Y,Teng Y.Hydrolysis and condensation of silane a-gent for metallic surface treatment[J].J.Chongqing University,2002,25(10):72(徐溢,唐守渊,滕毅.金属表面处理用硅烷试剂的水解与缩聚[J].重庆大学学报,2002,25(10):72)
[32]Franquet A,Terryn H,Bertrand P.Use of optical methods to char-acterize thin silane films coated on aluminium[J].Surf.InterfaceAnal.,2002,34:25
[33]Kozerski G E,Gallavan R H,Ziemelis M J.Investigation of tri-alkoxysilane hydrolysis kinetics using liquid chromatography withinductively coupled plasma atomic emission spectrometric detectionand non-linear regression modeling[J].Anal.Chim.Acta,2003,489:103
[34]Cunliffe A V,Evans S,Tod D A.Optimum preparation of silanesfor steel pre-treatment[J].Adhesion&Adhesives,2001,21:287
[35]Satoshi O,Naokatsu F.Theoretical study of hydrolysis and conden-sation of silicon alkoxides[J].J.Phys.Chem.A,1998,102:3991
[36]Tejedor-Tejedor M I,Paredes L,Anderson M A.Evaluation ofATR-FTIR spectroscopy as an”in situ”tool for following thehydrolysis and condensation of alkoxysilanes under rich H2O condi-tions[J].Chem.Mater.,1998,10:3410
[37]Riegel B,Blittersdorf S,Kiefer W.Kinetic investigations of hydrol-ysis and condensation of the glycidoxypropyltrimethoxysilane/aminopropyltriethoxy-silane system by means of FT-Ramanspectroscopy[J].J.Non-cryst.Solids,1998,226:76
[38]Britt D W,Hlady V.Protonation,hydrolysis and condensation ofmono-and trifunctional silanes at the air/water interface[J].Langmuir,1999,15:1770
[39]efík J,Rankin S E,Kirchner S J.Esterfication,condensation anddeprotonation equilibria of trimethylsilanol[J].J.Non-cryst.Solids,1999,258:187
[40]efík J,McCormick A V.Kinetic and thermodynamic issues in theearly stages of sol-gel processes using silicon alkoxides[J].Catal.Today.,1997,35:205
[41]Kohlheim I,Lange D,Kelling H.On the reaction of silanols withalcohols[J].J.Prakt Chem.Chem.Z,1996,338:660
[42]Grubb W T.Rate study of the silanol condensation reaction at 25℃in alcoholic solvents[J].J.Am.Chem.Soc.,1954,76:3408
[43]Bilda S,Rohr G,Lange D.On the condensation behavior ofsilanols.Ⅴ.Base catalyzed condensation of organodimethylsilanolsin dioxane/water[J].Z.Anorg.Allg.Chem.,1988,564:155
[44]West R,Baney R H.Hydrogen-bonding studiesⅡ.Acidity andbasicity of silanols compared to alcohols[J].J.Am.Chem.Soc.,1959,81:6145}
[1] 解璇, 刘莉, 王福会. TiO2的制备及表面修饰工艺对其光电化学阴极保护性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(2): 123-130.
[2] 师超,邵亚薇,熊义,刘光明,俞跃龙,杨志广,许传钦. 硅烷偶联剂改性磷酸锌对环氧涂层防腐性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(1): 38-44.
[3] 常亮, 师超, 邵亚薇, 王艳秋, 刘斌, 孟国哲. 植酸转化膜对环氧清漆防腐性能的影响[J]. 中国腐蚀与防护学报, 2018, 38(3): 265-273.
[4] 崔学军, 平静. 微弧氧化及其在镁合金腐蚀防护领域的研究进展[J]. 中国腐蚀与防护学报, 2018, 38(2): 87-104.
[5] 左银泽, 陈亮, 冯清, 高延敏. PFOA/硅烷偶联剂分子自组装膜对环氧带锈涂层性能影响[J]. 中国腐蚀与防护学报, 2017, 37(6): 554-560.
[6] 崔学军,代鑫,郑冰玉,张颖君. KH-550对AZ31B镁合金表面微弧氧化膜结构及性能的影响[J]. 中国腐蚀与防护学报, 2017, 37(3): 227-232.
[7] 张方铭,曾志翔,王刚,陈军君,徐勇,王立平. Q235钢超疏水表面制备及耐蚀性能研究[J]. 中国腐蚀与防护学报, 2016, 36(6): 617-623.
[8] 孙伟, 尹桂来, 刘福春, 唐囡, 韩恩厚, 万军彪, 柯伟, 邓静伟. 装载缓蚀剂的纳米SiO2对环氧涂层耐腐蚀性的影响[J]. 中国腐蚀与防护学报, 2015, 35(5): 447-454.
[9] 周兵, 唐囡, 张颖君, 毛亮, 王艳秋, 邵亚薇, 孟国哲. 镀锌钢表面高附着环氧清漆的研究[J]. 中国腐蚀与防护学报, 2015, 35(5): 455-460.
[10] 尹成勇, 李澄, 彭晓燕, 王加余, 王艳慧, 郑顺丽, 李敏, 胡玮. 溶胶-凝胶法制备超疏水性纳米复合防腐涂层[J]. 中国腐蚀与防护学报, 2014, 34(3): 257-264.
[11] 马 欢 戴亚堂 李常雄 张 欢 欧青海 申 振. 聚噻吩的电化学合成及其对不锈钢的抗腐蚀性研究[J]. 中国腐蚀与防护学报, 2013, 33(2): 148-152.
[12] 张旭明,王建军,刘春明,黄丽娟,殷跃军. Q235钢表面铈盐掺杂乙烯基三乙氧基硅烷膜制备及耐蚀性能[J]. 中国腐蚀与防护学报, 2012, 32(6): 455-459.
[13] 黄本生,江仲英,潘欢欢,袁鹏斌,刘清友. 热处理工艺对G105钻杆材料抗腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2012, 32(1): 67-69.
[14] 赵义,王福. 热处理工艺对17-4PH钢耐海水腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2011, 31(6): 473-477.
[15] 崔学军,李国军,董洪亮,任瑞铭. 温度对改性硅溶胶涂层结构及耐蚀性能的影响[J]. 中国腐蚀与防护学报, 2011, 31(2): 155-159.