|
|
非晶Ti-B基涂层的力学和耐蚀性能研究 |
徐相英1,2,葛芳芳2,李朋2,舒瑞2,黄峰2(),李谋成1 |
1. 上海大学 材料科学与工程学院 上海 200072 2. 中国科学院宁波材料技术与工程研究所 宁波 315201 |
|
Corrosion Resistance and Hardness of Amorphous Ti-B Based Coatings |
Xiangying XU1,2,Fangfang GE2,Peng LI2,Rui SHU2,Feng HUANG2(),Moucheng LI1 |
1. Materials Science and Engineering, Shanghai University, Shanghai 200072, China 2. Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China |
引用本文:
徐相英,葛芳芳,李朋,舒瑞,黄峰,李谋成. 非晶Ti-B基涂层的力学和耐蚀性能研究[J]. 中国腐蚀与防护学报, 2016, 36(6): 573-579.
Xiangying XU,
Fangfang GE,
Peng LI,
Rui SHU,
Feng HUANG,
Moucheng LI.
Corrosion Resistance and Hardness of Amorphous Ti-B Based Coatings. Journal of Chinese Society for Corrosion and protection, 2016, 36(6): 573-579.
链接本文:
https://www.jcscp.org/CN/10.11902/1005.4537.2016.176
或
https://www.jcscp.org/CN/Y2016/V36/I6/573
|
[1] | Cheng X, Zhang R Y, Li F.Study on preparation and properties of TiB2 protective coating[J]. Paint Coat. Ind., 2011, 41(7): 24 | [1] | (陈枭, 张仁元, 李风. TiB2防护涂层的制备及性能[J]. 涂料工业, 2011, 41(7): 24) | [2] | Sun C Y, He Q B, Li L, et al.Review of TiB2 coating deposited by magnetron sputtering method[J]. Mater. Rev., 2009, 23(14): 48 | [2] | (孙彩云, 何庆兵, 李立等. 磁控溅射法制备TiB2涂层的研究进展[J]. 材料导报, 2009, 23(14): 48) | [3] | Navinsek B, Panjan P, Milosev I.PVD coatings as an environmentally clean alternative to electroplating and electroless processes[J]. Surf. Coat. Technol., 1999, 1(16): 476 | [4] | Fastner U, Steck T, Pascual A, et al.Electrochemical deposition of TiB2 in high temperature molten salts[J]. J. Alloy. Compd., 2008, 452(1): 32 | [5] | Lim J W, Lee J J, Ahn H, et al.Mechanical properties of TiN/TiB2 multilayers deposited by plasma enhanced chemical vapor deposition[J]. Surf. Coat. Technol., 2003, 17(4): 720 | [6] | Fenker M, Balzer M, Kappl H.Corrosion protection with hard coatings on steel: Past approaches and current research efforts[J]. Surf. Coat. Technol., 2014, 25(7): 182 | [7] | Korhonen A S.Corrosion of thin hard pvd coatings[J]. Vacuum, 1994, 45(10/11): 1031 | [8] | Liu C, Bi Q, Leyland A, et al.An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II. EIS interpretation of corrosion behaviour[J]. Corros. Sci., 2003, 45(6): 1257 | [9] | Milosev I, Navinsek B A.Corrosion study of tin (physical vapor-deposition) hard coatings deposited on various substrates[J]. Surf. Coat. Technol., 1994, 63(3): 173 | [10] | Massiani Y, Medjahed A, Crousier J P, et al.Corrosion of sputtered titanium nitride films deposited on iron and stainless-steel[J]. Surf.Coat. Technol., 1991, 45(1-3): 115 | [11] | Purandare Y P, Ehiasarian A P, Hovsepian P E. Deposition of nanoscale multilayer CrN/NbN physical vapor deposition coatings by high power impulse magnetron sputtering [J]. J. Vac. Sci. Technol., 2008, 26(2)A: 288 | [12] | Meng F P, Wang B, Ge F F, et al.Microstructure and mechanical properties of Ni-alloyed SiC coatings[J]. Surf. Coat. Technol., 2012, 21(3): 77 | [13] | Lin C H, Duh J G.Electrochemical impedance spectroscopy (EIS) study on corrosion performance of CrAlSiN coated steels in 3.5wt.%NaCl solution[J]. Surf. Coat. Technol., 2009, 204(6/7): 784 | [14] | Liu C, Bi Q, Leyland A, et al.An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part I. Establishment of equivalent circuits for EIS data modelling[J]. Corros. Sci., 2003, 45(6): 1243 | [15] | Valleti K, Jyothirmayi A, Ramakrishna M, et al. Influence of substrate temperature and bias voltage on properties of chromium nitride thin films deposited by cylindrical cathodic arc deposition [J]. J. Vac. Sci. Technol., 2011, 29(5)A: 1 | [16] | Wang H Y, Wang B, Li S Z, et al.Toughening magnetron sputtered TiB2 coatings by Ni addition[J]. Surf. Coat. Technol., 2013, 23(2): 767 | [17] | Gu W C, Li S D, Wang H Y, et al.Influence of bias voltage on microstructure and properties of magnetron sputtering TiB2 coating[J]. J. Aeronaut. Mater., 2014, 34(5): 37 | [17] | (谷文翠, 李寿德, 王怀勇等. 基片偏压对磁控溅射制备TiB2涂层结构及性能的影响[J]. 航空材料学报, 2014, 34(5): 37) | [18] | Sundgren J E, Hentzell H T G A. Review of the present state of art in hard coatings grown from the vapor-phase [J]. J. Vac. Sci. Technol., 1986, 4(5)A: 2259 | [19] | Haines J, Leger J M, Bocquillon G.Synthesis and design of superhard materials[J]. Annu. Rev. Mater. Res., 2001, 31: 1 | [20] | Zhu P, Ge F F, Li S Z, et al.Microstructure, chemical states, and mechanical properties of magnetron co-sputtered V1-xAlxN coatings[J]. Surf. Coat. Technol., 2013, 23(2): 311 | [21] | Chen B F, Pan W L, Yu G P, et al.On the corrosion behavior of TiN-coated AISI D2 steel[J]. Surf. Coat. Technol., 1999, 111(1): 16 | [22] | Marco J F, Agudelo A C, Gancedo J R, et al.Corrosion resistance of single TiN layers, Ti/TiN bilayers and Ti/TiN/Ti/TiN multilayers on iron under a salt fog spray (Phohesion) test: An evaluation by XPS[J]. Surf. Interface Anal., 1999, 27(2): 71 | [23] | Lin M T, Wan C H, Wu W T.Comparison of corrosion behaviors between SS304 and Ti substrate coated with (Ti,Zr) N thin films as metal bipolar plate for unitized regenerative fuel cell[J]. Thin Solid Films, 2013, 54(4): 162 | [24] | Nie X, Meletis E I, Jiang J C, et al.Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis[J]. Surf. Coat. Technol., 2002, 149(2/3): 245 | [25] | Qin L G, Zhao W J, Hou H, et al.Achieving excellent anti-corrosion and tribological performance by tailoring the surface morphology and chemical composition of aluminum alloys[J]. RSC Adv., 2014, 4(104): 60307 | [26] | Vacandio F, Massiani Y, Gravier P, et al.Improvement of the electrochemical behaviour of AlN films produced by reactive sputtering using various under-layers[J]. Electrochim. Acta, 2001, 46(24/25): 3827 | [27] | Liu C, Bi Q, Ziegele H, et al. Structure and corrosion properties of PVD Cr-N coatings [J]. J. Vac. Sci. Technol., 2002, 20(3)A: 772 | [28] | Creus J, Idrissi H, Mazille H, et al.Corrosion behaviour of TiN and CrN coatings produced by cathodic arc PVD process on mild steel substrate[J]. Surf. Eng., 1998, 14(5): 432 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|