|
|
|
| 304不锈钢在Na2SO4溶液中的微动腐蚀行为 |
| 李积武;王殿梁 |
| 嘉兴学院机电工程学院 嘉兴 314001 |
|
| FRETTING CORROSION BEHAVIOR OF 304 STAINLESS STEEL IN Na2SO4 SOLUTION |
| LI Jiwu; WANG Dianliang |
| School of Mechanical and Electrical Engineering; Jiaxing University; Jiaxing 314001 |
| [1] Iwabuchi A, Lee J W, Uchidate M. Synergistic effect of fretting wear and sliding wear of Co-alloy and Ti-alloy in Hanks'solution [J]. Wear. 2007, 263: 492-500
[2] Li J W, Iwabuchi T A, Shimiz. A Study on the fretting wear of SUS304 steel in Na2SO4 solution [J]. Jpn. Soc. Tribol., 2005, 50(2): 180-186
[3] Si S H. Effect of laser power on microstructures and wear properties of WCP/Ni metal ceramics coating [J]. J. Chin. Soc. Corros. Prot.,2004, 24(3): 183-187
(斯松华. 激光功率对WCp /Ni基金属陶瓷涂层的组织与磨损性能的影响 [J]. 中国腐蚀与防护学报，2004, 24(3): 183-187)
[4] Weng Y J, Li X Y. A study on synergism between erosion and corrosion of carbon steel in sandy oil field brines [J]. J. Chin.Soc. Corros. Prot., 2000, 20(5): 281-286
(翁永基, 李相怡. 碳钢在含沙油田水中腐蚀-磨损交互作用研究 [J].中国腐蚀与防护学报，2000, 20(5): 281-286)
[5] Zhou Z R, Leo Vincent. Fretting Wear [M]. Beijing: Science Press, 2002
(周仲荣, Leo Vincent. 微动磨损 [M]. 北京: 科学出版社, 2002)
[6] Ren P D, Chen G X, Zhou Z R. Fretting wear behavior of GCr15 steel under lubrication of various aqueous mediums [J]. Tribology,2003，23(04): 331-33
(任平弟, 陈光雄, 周仲荣. 不同水介质润滑下GCr15钢的微动磨损特性 [J]. 摩擦学学报，2003，23(04): 331-335)
[7] Yan J Z, Wu Y S, Li J Q. Fretting corrosion wear transferability of 316L stainless steel [J]. J. Chin. Soc.Corros. Prot., 2001, 21(2): 88-94
(闫建中, 吴荫顺, 李久青. 316L不锈钢微动磨蚀过程力学化学交互作用的迁移行为 [J]. 中国腐蚀与防护学报，2001, 21(2): 88-94)
[8] Yan J Z, Wu Y S, Zhang L. The effect of localized corrosion on fretting attack of 316L stainless steel in 0.9\% NaCl solution [J]. J. Chin. Soc. Corros.Prot., 2000, 20(4): 237-242
(闫建中, 吴荫顺, 张琳. 316L不锈钢在NaCl溶液微动过程中局部腐蚀作用研究 [J]. 中国腐蚀与防护学报，2000, 20(4): 237-242)
[9] Yan J Z, Wu Y S, Li J Q. Repassivation behavior of 316L stainless steel in fretting wear and corrosion process [J]. J. Chin. Soc. Corros. Prot., 2000, 20(6):355-360
(闫建中, 吴荫顺, 李久青. 316L不锈钢微动磨蚀过程表面钝化膜自修复行为研究 [J]. 中国腐蚀与防护学报，2000, 20(6): 355-360)
[10] Tian X L, Lin Y Z, Liu J J.Electrochemical behavior in erosion-corrosion of carbon steel in liquid-solid double-phase flow loop [J]. J. Chin. Soc. Corros.Prot., 2004, 24(1): 48-51
(田兴玲, 林玉珍, 刘景军. 碳钢在液/固双相管流中磨损腐蚀的电化学行为 [J]. 中国腐蚀与防护学报，2000, 20(6): 355-360)
[11] Li J W. Fretting corrosion property of Zr-4 alloy in Na2SO4 solution [J]. Tribology, 2007，27(5): 406-410
(李积武. Zr-4合金在Na2SO4溶液中的微动腐蚀特性 [J]. 摩擦学学报, 2007，27(5): 406-410)
[12] Kim D G, Lee Y Z. Experimental investigation on sliding and fretting wear of steam generator tube materials [J]. Wear, 2001,250-251: 637-680
[13] Hou B, Huang W J, Chen B S, et al. Fretting wear mechanisms of AZ91D magnesium alloy in slip regime [J].Tribology, 2004，24(4): 351-354
(侯滨，黄伟九，陈波水等. AZ91D镁合金滑移区域微动磨损机理研究 [J]. 摩擦学学报, 2004，24(4): 351-354)
[14] Luo Q, Qiu S Y. Yin K J, et al. Influence of Cr6+ on corrosion behavior of type 321 stainless steel in uranyl nitrate solution [J]. Corros.Prot., 2008, 29(3): 113-115
(罗强, 邱绍宇, 尹开锯等. Cr6+对321不锈钢在硝酸铀酰溶液中的腐蚀行为影响 [J]. 腐蚀与防护，2008, 29(3): 113-115)
[15] Kim T H. Fretting wear characteristics of zircaloy-4 tube [J]. Wear, 1998, 219(1): 3-7
[16] Attia M H, Magel E. Experimental investigation of long term fretting wear of multi-span steam generator tube withU-bend sections [J]. Wear, 1999, 225: 563-574
[17] Iwabuchi A，Sonoda T，Yashiro H，et al. Application of potential pulse method to the corrosion behavior of the fresh surface formed by scratching and sliding in corrosive wear [J]. Wear，1999, 226: 181-189 |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
