Please wait a minute...
中国腐蚀与防护学报  1998, Vol. 18 Issue (3): 214-220         
  研究报告 本期目录 | 过刊浏览 |
环境促进开裂中裂纹扩展速度的测定方法述评
牛林;林海潮;曹楚南;宋光铃;史志明
中国科学院金属腐蚀与防护研究所;金属腐蚀与防护国家重点实验室沈阳110015;中国科学院金属腐蚀与防护研究所;金属腐蚀与防护国家重点实验室沈阳110015;中国科学院金属腐蚀与防护研究所;金属腐蚀与防护国家重点实验室沈阳110015;中国科学院金属腐蚀与防护研究所;金属腐蚀与防护国家重点实验室沈阳110015;中国科学院金属腐蚀与防护研究所;金属腐蚀与防护国家重点实验室沈阳110015
EVALUATION OF DETERMINATION METHODS OF CRACK PROPAGATION RATE IN ENVIRONMENTALLY ASSISTED CRACKING
NIU Lin LIN Hai-chao CAO Chu-nan SONG Guang-ling SHI Zhi-ming(The Institute of Corrosion and Protection of Metals; Chinese Academy of Sciences; State Key Laboratory of Corrosion and Protection; Shenyang 110015)
引用本文:

牛林;林海潮;曹楚南;宋光铃;史志明. 环境促进开裂中裂纹扩展速度的测定方法述评[J]. 中国腐蚀与防护学报, 1998, 18(3): 214-220.
, , , , . EVALUATION OF DETERMINATION METHODS OF CRACK PROPAGATION RATE IN ENVIRONMENTALLY ASSISTED CRACKING[J]. J Chin Soc Corr Pro, 1998, 18(3): 214-220.

全文: PDF(614 KB)  
摘要: 文中综述了环境促进开裂中几种有代表性的裂纹扩展速度的确定方法及有关模型,并对这些方法和模型的使用范围及其优缺点进行了分析和评价。
关键词 : 裂纹扩展速度,  环境促进开裂,  方法    
Abstract:The determination methods and relevant models of crack propagation rate in environmentally assisted cracking were summed up and reviewed. The advantages and shortcomings as well as application range of these methods and models were analyzed and evaluated. The main purpose of the review was to provide convincing basis not only for the most suitable determination of crack propagation rate in various complex material/environment combinations but also for the life-prediction of components in practical service.
Key words: Crack propagation rate    Environmentally assisted cracking    Method
收稿日期: 1998-06-25     
基金资助:国家自然科学基金;;中国科学院“百人计划”资助项目
1 Brown B F. Stress Corrosion Cracking in High Strength Steels, and in Titanium and Aluminum Alloys, NRL, Washington D C. 1972
2 Chu W, Hsiao C, Tu S, et al. Corrosion, 1982, 38:446
3 Wendier-Kalsch E. Werkstoffe and Corrosion, 1978, 29:703
4 Speidel M O. Corrosion, 1977, 33:199
5 Haruna T, Shibata T. Corrosion, 1994, 50:785
6 Speidel M O. Metall. Trans. A, 1981, 12A: 779
7 Speidel M O. The Theory of Stress Corrosion Cracking in Alloys, eds. Scully J C, NATO, Scientific Affairs Division, Brussels, 1971. p289
8 Parking R N. Brit. Corros. J., 1979, 14:5
9 Ford F P. Corrosion Processes, eds. Parkins R N, Applied Science, New York, NY, 1982. p271
10 Ford F P. EPRI Report NP2589, Palo Alto, CA: EPRI, 1982
11 Ford F P, et al. Corrosion/85, Paper no. 352, Boston, 1985
12 Ford F P. Corrosion/86, Paper no. 327, Houston, 1986
13 Parkins R N. Proc. 3rd Int. Conf. Mechanical Behavior of Materials, Cambridge, U. K, August 1979, eds. K. J. Miller et al., Pergamon Press, 1980. p139
14 Ford F P. Corrosion, 1996, 52:375
15 Congleton J, et al. Corros. Sci., 1985, 25:633
16 Parkins R N, et al. Metal Sci., 1977, 11:405
17 Parkins R N. Corrosion, 1990, 46:178
18 Turnbull A. Corros. Sci., 1993, 34:921
19 Parkins R N. Environment-induced Cracking of Metals, eds. Gangloff R Petal., NACE, Houston,1990, pl
20 Scully J C. Corros. Sci., 1968, 8:513
21 Parkins R N. Corros. Sci., 1980, 20:147
22 Jones D A. Metall. Trans. A, 1985, 16A: 1133
23 Ford F P, Burstein G T, Hoar T P. J.Electrochem. Soc., 1980, 127:6
24 Hagyard T, Earl W B. J. Electrochem. Soc., 1968, 115:623
25 Less D J, Hoar T P. Corrs. Sci., 1980, 20:723
26 Newman R C, Burstein G T. Corros. Sci., 1981, 21:119
27 Diegle R B, Lineman D M. J. Electrochem. Soc., 1984, 131:106
28 Diegle R B, Vermilyea D A. J. Electrochem. Soc., 1975, 122:180
29 Ford F P, Silverman M. Corrosion, 1980, 36:558
30 Carranza R M, Galvele J R. Corros. Sci., 1988, 28:233
31 Carranza R M, Galvele J R. Corros. Sci., 1988, 28:851
32 Galvele J R, Torresi R M, Caxrauza R M. Corros. Sci.,1990, 31:536
33 Beck T R. J. Electrochem. Soc., 1982, 129:2500
34 Beck T R. Corrosion, 1974, 30:408
35 Wei R P, Alavi A. Scrip. Metall. 1988, 22:969
[1] 庞成泽, 邢少华, 杜敏, 徐铖. 海洋环境下铝合金腐蚀磨损研究进展[J]. 中国腐蚀与防护学报, 2026, 46(4): 962-970.
[2] 张玲玲, 郭英之, 杨超. 木质文物的腐蚀行为与防护技术研究进展[J]. 中国腐蚀与防护学报, 2026, 46(2): 341-351.
[3] 王德岭, 刘以俊, 郭章伟, 刘涛. 船体材料失效分析与防护措施研究进展[J]. 中国腐蚀与防护学报, 2025, 45(3): 611-619.
[4] 鲍一晨, 石秀强, 孟凡江, 潘春婷, 明洪亮. 重水堆压力管延迟氢化物开裂应力强度因子门槛值测试方法研究[J]. 中国腐蚀与防护学报, 2025, 45(2): 381-387.
[5] 黄居峰, 宋光铃. 镁合金腐蚀测试与分析研究进展[J]. 中国腐蚀与防护学报, 2024, 44(3): 519-528.
[6] 王泉润, 侯进, 侯保荣, 田惠文. 气相缓蚀剂分析方法研究进展[J]. 中国腐蚀与防护学报, 2023, 43(6): 1189-1202.
[7] 周梦鑫, 吴军, 樊志彬, 周学杰, 陈昊. 大气腐蚀在线监测技术研究现状与展望[J]. 中国腐蚀与防护学报, 2023, 43(1): 38-46.
[8] 滕琳, 陈旭. 海洋环境中金属电偶腐蚀研究进展[J]. 中国腐蚀与防护学报, 2022, 42(4): 531-539.
[9] 徐迪, 杨小佳, 李清, 程学群, 李晓刚. 材料大气环境腐蚀试验方法与评价技术进展[J]. 中国腐蚀与防护学报, 2022, 42(3): 447-457.
[10] 王东亮, 丁华平, 马云飞, 龚攀, 王新云. 非晶合金耐蚀性研究进展[J]. 中国腐蚀与防护学报, 2021, 41(3): 277-288.
[11] 寇杰, 张新策, 崔淦, 杨宝安. 储罐底板阴极保护电位分布研究进展[J]. 中国腐蚀与防护学报, 2017, 37(4): 305-314.
[12] 林翠,赵晓斌,张翼飞. 金属材料的空化腐蚀行为及影响因素研究进展[J]. 中国腐蚀与防护学报, 2016, 36(1): 11-19.
[13] 李明丽, 刘丹, 曹淑云, 彭坤, 梁平, 史艳华, 桂建舟, 刘峰. 盐酸介质中Brönsted酸离子液体对Q235钢的缓蚀行为[J]. 中国腐蚀与防护学报, 2015, 35(5): 400-406.
[14] 王凤平,刘岚,丁言伟,胡隋军,刘照斌,刘丹,张丽. 油气田H2S腐蚀体系模拟方法探究[J]. 中国腐蚀与防护学报, 2015, 35(3): 251-256.
[15] 李强, 唐晓, 李焰. 冲刷腐蚀研究方法进展[J]. 中国腐蚀与防护学报, 2014, 34(5): 399-409.