合金元素对新型Co-Al-W合金热腐蚀行为的影响

中国腐蚀与防护学报

2010, Vol. 30

Issue (6): 457-464

研究报告

本期目录 | 过刊浏览

合金元素对新型Co-Al-W合金热腐蚀行为的影响

徐仰涛^1,2,夏天东^1,2,闫健强^1,2

1. 兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室兰州 730050
2. 兰州理工大学有色金属合金及加工教育部重点实验室兰州 730050

EFFECT OF ALLOYING ELEMENTS TO HOT CORROSION BEHAVIOR OF NOVEL Co-Al-W SUPERALLOY

XU Yangtao^1,2, XIA Tiandong^1,2, YAN Jianqiang^1,2

1. State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050
2. Key Laboratory of Non-ferrous Metal Alloys, Ministry of Education，Lanzhou University of Technology，Lanzhou 730050

全文: PDF(3586 KB)

摘要: 研究了由γ'-Co₃(Al,W)相沉淀强化的新型钴基Co-Al-W 高温合金在800℃、75% Na₂SO₄+25% NaCl熔盐中的热腐蚀动力学及合金元素Mo、Nb、Ta和Ti对合金热腐蚀行为的影响。研究发现，2Mo、2Nb、 2Ta和2Ti合金比9.8W合金具有更好的抗热腐蚀能力，Mo和Ti对提高合金耐热腐蚀能力的效果比Ta和Nb显著。加入合金元素的合金热腐蚀膜由三层组成，即主要由Co氧化物CoO和Co₃O₄组成的腐蚀膜外层，由合金元素、Al、 Co及W复杂氧化物组成的中间过渡层和由Al、Co氧化物组成的腐蚀膜内层。随着腐蚀时间的增加，中间过渡层厚度逐渐增加，热腐蚀膜内、外层厚度变化不大，但内层致密性逐渐增加。

关键词 ： Co-Al-W合金, 合金元素, 热腐蚀

Abstract：Co-Al-W alloy is a kind of novel Co-based superalloy strengthened by ternary compound γ'-Co₃(Al,W) phase with the precipitation strengthening on γ-Co matrix. The paper studies the kinetic of hot corrosion of Co-Al-W superalloy at 800℃ in 75% Na₂SO₄+25\% NaCl molten salt and the effect on hot corrosion behavior of Co-Al-W alloy with alloying elements of Mo, Nb, Ta and Ti. The results show that the alloy of 2Mo, 2Nb, 2Ta and 2Ti have the superior anti-hot corrosion ability compared to 9.8W alloy. The anti-hot corrosion ability of Co-Al-W alloy with alloying elements Ta and Nb are inferior to Co-Al-W alloy adding Mo and Ti elements. The hot corrosion oxide scale with alloying elements of Mo, Nb, Ta and Ti is still made up of three layers, that is the external corrosion layer consists of Co oxide CoO and Co₃O₄, the intermediate mixed oxides layer composed of complex oxide and nonuniform oxide layer of alloying elements, Co, Al, W and an internal attacked layer with different compounds of Co, Al and O. With the increasing of corrosion times, the intermediate mixed oxides layer becomes thicker, the thickness of internal and external layer almost has no change, but compactness of internal layer is gradually increased.

Key words： Co-Al-W superalloys alloying elements hot corrosion

收稿日期: 2009-10-19

ZTFLH:

TG172.6

基金资助:

2009年中国科学院西部之光项目和甘肃省中青年科技基金计划项目(099RJYA018)资助

通讯作者: 徐仰涛， E-mail: xuyt@lut.cn

作者简介: 徐仰涛，1978年生，讲师，硕士，研究方向为腐蚀与防护

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	徐仰涛
44.8K

引用本文:

徐仰涛,夏天东,闫健强. 合金元素对新型Co-Al-W合金热腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2010, 30(6): 457-464.
XU Ang-Shou. EFFECT OF ALLOYING ELEMENTS TO HOT CORROSION BEHAVIOR OF NOVEL Co-Al-W SUPERALLOY. J Chin Soc Corr Pro, 2010, 30(6): 457-464.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y2010/V30/I6/457

[1] Chen L,Wang F G. Process in study on anti-high temperature oxidation alloy [J]. Mater. Rev., 2002, 16(5): 27-29

    (陈磊, 王富岗. 抗高温氧化合金的研究进展 [J]. 材料导报, 2002, 16(5): 27-29)

[2] Kai W, Lee C H, Lee T W, et al. Sulfidation behavior of Inconel 738 superalloy at 500-900℃ [J]. Oxid. Met.,2001, 56(1-2): 51-71

[3] Misra R D K, Sivakumar R. Effect of NaCl vapor on the oxidation of Ni-Cr alloy [J]. Oxid. Met.,1986, 25(1-2): 83-92

[4] Zhu R Z, Guo M J, Zuo Y. A Study of the mechanism of internal sulfidation-internal oxidation during hot corrosion of Ni-base alloys [J]. Oxid. Met., 1987, 27(5-6): 253-265

[5] Bourhis Y, John C S. Na₂SO₄ and NaCl-induced hot corrosion of six nickel-base superalloys [J] . Oxid. Met., 1975, 9(6): 507-528

[6] Kameswa S R. The role of NaCl in the hot-corrosion behavior of Nimonic alloy 90 [J]. Oxid. Met., 1986, 26(1-2): 33-44

[7] Cui H, Zhang J S, Murata Y, et al.Hot corrosion behavior of Ni -based superalloy with higher Cr contents-part Ⅱ. Mechanism of hot corrosion behavior [J]. J Univ.Sci. Technol. Beijing (Eng. Ed.), 1996, 3(2): 91-98

[8] Huang Q Y, Li H K. High Temperature Alloy [M]. Beijing: Metallurgical Industry Press, 2000, 100-133

    (黄乾尧, 李汉康. 高温合金 [M]. 北京: 冶金工业出版社, 2000, 100-133)

[9] Robert I, Rapp A. Hot corrosion of materials: a fluxing mechanism [J]. Corros. Sci., 2002, 44(2): 209-221

[10] Li Y, Guo J T, Yuan C, et al. Hot corrosion of nickel-base cast superalloy K35 at 800℃ [J]. J. Chin.Soc. Corros. Prot., 2005, 25(4): 250-255

     (李云, 郭建亭, 袁超等. 镍基铸造高温合金K35的热腐蚀行为 [J]. 中国腐蚀与防护学报, 2005, 25(4): 250-255)

[11] Sato J, Omori T, Oikawa K, et al. Cobalt-base high-temperature alloys [J]. Science, 2006, 312: 90-93

[12] Akane S, Garret C. de Nolf, Pollock. et al. Flow stress anomalies in γ/γ' two-phase Co-Al-W-base alloys [J]. Scr. Mater., 2007, 56(5): 385-388

[13] Beltran A M. Superalloys II [M]. New York: Wiley, 1987: 135

[14] Li S S, Han Y F, Xiao C B, et al.Corrosion resistances of Ni₃Al based alloy IC6 and MCrAlY overlay coatings [J]. Chin. J. Nonferrous Met., 2003, 13(6): 1451-1455

     (李树索, 韩雅芳, 肖程波等. Ni₃Al基合金IC6及MCrAlY包覆涂层的抗腐蚀性能 [J]. 中国有色金属学报, 2003, 13(6): 1451-1455)

[15] Ecer G M, Meier G H. Oxidation of high-chromium Ni-Cr alloys [J].Oxid. Met., 1979, 13(2): 119-158

[16] Ben G, Abderrazlk, Moulin G, et al. Relation between impurities and oxide-scale growth mechanisms on Ni-34Cr and Ni-20Cr alloys. I. influence of C, Mn, and Si [J]. Oxid. Met., 1990, 33(3-4):191-235

[17] Liu P S, Liang K M. High-temperature oxidation behavior of the Co-base superalloy DZ40M in air [J]. Oxid.Met., 2000, 53(3-4): 351-360

[18] Liu P S. High temperature oxidation behavior of low pressure gas phase deposited aluminide coatings on Co-base superalloy DZ40M [J].J. Chin. Soc. Corros. Prot., 1999, 19(3): 144-148

     (刘培生. DZ-40M钴基合金低压气相沉积铝化物涂层的高温氧化行为 [J]. 中国腐蚀与防护学报, 1999, 19(3): 144-148)

[19] Luthra K L. Low temperature hot corrosion of cobalt-base alloys: partⅠ. Morphology of the reaction product [J]. Metall. Trans., 1982, 13A: 1843-1852

[20] Zhao S Q, Xie X S, Gaylord D. Corrosion of a new nickel base superalloy in coal-fired boiler environments [J]. Acta Metall. Sin.,2004, 40(6): 659-663

     (赵双群, 谢锡善, Gaylord D. 新型镍基高温合金在模拟燃煤锅炉环境中的腐蚀 [J]. 金属学报, 2004, 40(6): 659-663)

[21] Zhang J S, Hu Z Q, Murata Y, et al.Design and development of hot-resistant nickel-base single crystal superalloys by the d-electrons alloy design theory: part Ⅱ. effects of refractory metals Ti,Ta and Nb on microstructure and properties [J]. Metall. Trans., 1993, 24A: 2451-2463

[22] Zhu Y S, Zhang S N, Xu L Y, et al. Superalloys [C].Warrendale, PA: TMS, 1988, 703-12

[1]	王帅,刘新宽,刘平,陈小红,李伟,马凤仓,何代华,张珂. Sn、Al对无镍白铜耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(1): 45-50.
[2]	陈超,梁艳芬,梁天权,满泉言,罗毅东,张修海,曾建民. 稀土复合掺杂ZrO₂陶瓷涂层抗Na₂SO₄+NaVO₃热腐蚀性能的研究进展[J]. 中国腐蚀与防护学报, 2019, 39(4): 291-298.
[3]	虞礼嘉,梁文萍,林浩,缪强,黄彪子,崔世宇. 激光重熔YSZ热障涂层950 ℃的热腐蚀行为[J]. 中国腐蚀与防护学报, 2019, 39(1): 77-82.
[4]	陈浩,陈庆,辛丽,时龙,朱圣龙,王福会. DD98M纳米晶AlSi渗层制备及抗高温腐蚀性能研究[J]. 中国腐蚀与防护学报, 2019, 39(1): 59-67.
[5]	王希靖, 王博士, 杨超, 杨艳, 沈斌. 纯Ni母材及焊缝在熔融Na₂SO₄-K₂SO₄中热腐蚀研究[J]. 中国腐蚀与防护学报, 2018, 38(5): 495-501.
[6]	王喜忠,吴建颢,彭徽,郭洪波,宫声凯. 电子束物理气相沉积La₂Ce₂O₇热障涂层的高温燃气热腐蚀行为研究[J]. 中国腐蚀与防护学报, 2017, 37(1): 36-40.
[7]	刘光明,刘康生,毛晓飞,万中平,黄健航,于明明,汪元奎. T91钢在KCl+Na₂SO₄+K₂SO₄熔融盐中的热腐蚀行为研究[J]. 中国腐蚀与防护学报, 2017, 37(1): 23-28.
[8]	杨波,李茂东,刘光明,汪元奎,刘康生,翟伟,黄健航. 超音速喷涂Inconel 625/NiCr合金涂层的热腐蚀行为[J]. 中国腐蚀与防护学报, 2016, 36(5): 483-488.
[9]	吴多利, 张洪宇, 韦华, 郑启, 金涛, 孙晓峰. 4种改性的铝化物涂层对DZ38G合金热腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2014, 34(6): 502-506.
[10]	李威力,闫永贵,陈光,马力. 合金元素对铝基牺牲阳极性能的影响[J]. 中国腐蚀与防护学报, 2012, 32(2): 127-132.
[11]	王理,刘春阳,韩振宇,佟文伟. 燃气轮机涡轮零部件及材料热腐蚀行为与评价方法研究[J]. 中国腐蚀与防护学报, 2011, 31(5): 399-403.
[12]	侯军才，张秋美. 高电位镁牺牲阳极研究进展[J]. 中国腐蚀与防护学报, 2011, 31(2): 81-85.
[13]	韦华;黄粮;梁静静;孙晓峰;管恒荣;胡壮麒. Re对NiCrAlY涂层热腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2010, 30(2): 150-154.
[14]	朱明李美栓周延春. Ti₃Al基合金表面两种Cr_1-xAl_xN（x=0.18, 0.47）涂层热腐蚀性能[J]. 中国腐蚀与防护学报, 2009, 29(4): 306-311.
[15]	于忠锋; 郑志; 刘恩泽; 于永泗; 朱耀宵 . 两种低偏析镍基高温合金抗热腐蚀性能的研究[J]. 中国腐蚀与防护学报, 2008, 28(5): 277-281 .

Viewed

Full text

Abstract

Cited

Shared

Discussed