|
|
COMPARISON OF CRITICAL PITTING TEMPERATURES FOR OIL INDUSTRY STEELS USING ELECTROCHEMICAL NOISE |
WENG Yongji1; LI Weifeng2;1; LI Xiangyi1 |
1. Mechanical and Electronic Engineering; China University of Petroleum; Beijing 102200
2. CNOOC Engineering Ltd; Tianjin 300451 |
|
|
Abstract A newly experimental method is proposed for determination of the critical pitting temperature (CPT) of metals. The current noise of steel coupon is measured during the continuous heating process in ASTM standard solution. CPT is determined based on assessment of the maximal transition point in the item of standard deviation of current noise. The CPT values of eight steels commonly used in oil industry are measured by this quick and easy method.
|
Received: 04 March 2008
|
|
Corresponding Authors:
WENG Yongji
E-mail: wengyj @cup.edu.cn
|
[1] Iverson W P. Transient voltage changes produced in corroding metals and alloys [J]. Electrochem. Sci., 1968
[2] Hladky K. Corrosion monitoring [P]. US Patent #4, 575, 678
[3] Eden D A, John D G, Dawson J L. Corrosion monitoring [P]. US Patent #5, 139, 627
[4] Eden D A, Carr R N, Dawson J L. Method and apparatus for producing electrochemical impedance spectra [P]. US Patent #5, 425, 867
[5] Eden D A. Electrochemical noise-the first two octaves [A]. Corrosion/2003 [C], 2003: 386
[6] Dong Z H, Guo X P, Zheng J S, et al. Features of ECN of localized corrosion for 16Mn steel [J]. J. Chin. Soc. Corros. Prot., 2002, 22(5): 290-294
(董泽华, 郭兴蓬, 郑家燊等. 16Mn钢局部腐蚀中的电化学噪声特征 [J]. 中国腐蚀与防护学报, 2002; 22(5): 290-294)
[7] Hu L H, Du N, Wang M F, et al. Monitoring the initial pitting behaviors of 1Cr18Ni9Ti stainless steel by electrochemical noise and electrochemical impedance spectroscopy [J]. J. Chin. Soc. Corros.Prot., 2007; 27(4): 233-237
(胡丽华, 杜楠, 王梅丰等. 电化学噪声和电化学阻抗谱监测1Cr18Ni9Ti不锈钢的初期点蚀行为 [J]. 中国腐蚀与防护学报, 2007; 27(4): 233-237)
[8] ASTM. G48-00, Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution [S]: 2000
[9] ASTM. G150-99, Standard test method for electrochemical critical pitting temperature testing of stainless steels [S]: 1999
[10] Heyn A, Goellner J, Burker A. Determination of critical pitting temperatures using electrochemical noise [C]. Corrosion/2004, 2004: 04462
[11] Zhang J Q, Zhang Z , Wang J Q, et al. Analysis and application of electrochemical noise. (I). theory of electrochemical noise analysis [J]. J. Chin. Soc. Corros. Prot., 2001; 21(5): 310-320
(张鉴清, 张昭, 王建明等. 电化学噪声的分析与应用-I. 电化学噪声的分析原理 [J]. 中国腐蚀与防护学报, 2001; 21(5): 310-320)
[12] Mansfeld F, Lee C C. Comparison of electrochemical noise and impedance data for passive systems [A]. Corrosion/1999 [C], 1999: 195 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|