Please wait a minute...
J Chin Soc Corr Pro  2010, Vol. 30 Issue (2): 150-154    DOI:
Current Issue | Archive | Adv Search |
EFFECT OF Re ON THE HOT-CORROSION BEHAVIOR OF A NiCrAlY OVERLAY COATING
WEI Hua; HUANG Liang; LIANG Jingjing; SUN Xiaofeng; GUAN Hengrong; HU Zhuangqi
Superalloy Division;Institute of Metal Research; Chinese Academy of Sciences;Shenyang 110016
Download:  PDF(2073KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Arc ion plating (AIP) was used to produce NiCrAlY and NiCrAlYRe overlay coatings. After heat treatment in vacuum, both of the coatings consisted of γ‘-Ni3Al, γ-Ni, β-NiAl and α-Cr. Re in the NiCrAlYRe coating existed in α-Cr and promoted the precipitation and thermal stability of α-Cr. The existence of α-Cr in the interface of coating and substrate lowered coefficient of thermal expansion and thus reduced thermal stress in the surface scale, improving adherence of the scale. The addition of Re obviously increased hot corrosion resistance of NiCrAlY in 90%Na2SO4+10 mass%K2SO4.

Key words:  NiCrAlY      hot corrosion      AIP     
Received:  02 November 2009     
ZTFLH: 

TG174

 
Corresponding Authors:  WEI Hua     E-mail:  hwei@imr.ac.cn

Cite this article: 

WEI Hua; HUANG Liang; LIANG Jingjing; SUN Xiaofeng; GUAN Hengrong; HU Zhuangqi. EFFECT OF Re ON THE HOT-CORROSION BEHAVIOR OF A NiCrAlY OVERLAY COATING. J Chin Soc Corr Pro, 2010, 30(2): 150-154.

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2010/V30/I2/150

[1] Taylor M P, Evans H E. Formation of diffusion cells in LPPS MCrAlY coatings [J]. Mater. High Temp., 2000, 20: 461-466
[2] Wood G C. Fundamental factors determining the mode of scaling of heat resistant alloys [J]. Werkst. Korros., 1971, 22: 491-503
[3] Luthra K L, Briant C L. Surface segregation in M-Cr-Al-Y alloys [J].Metall. Trans., 1988, 19A: 923-938
[4] Smeggil J G, Funkenbusch A W, Bornstein N S. A relationship between indigenous impurity elements and protective oxide scale adherence characteristics [J]. Metall.Trans., 1986, 17A: 923-938
[5] Clemens D, Nickel H.TEM and SEM studies of protective alumina scale on NiCrAlY alloys [J]. J. Anal. Chem.,1996, 355: 703-706
[6] Saunders S R J, Nicholls J R. Hot salt corrosion test procedures and coating evaluation [J]. Thin Solid Film, 1984, 119: 247-269
[7] Czech N, Schmitz F, Stamm W.Microstructural analysis of the role of rhenium in advanced MCrAlY coatings [J]. Surf. Coat. Technol., 1995, 7: 28-33
[8] Beele W, Czech N, Quadakkers W J, et al. Long-term oxidation tests on a re-containing MCrAlY coating [J]. Surf. Coat. Technol.,1997, 94/95: 41-45
[9] Otsuka N, Rapp R A. Effect of chromate and vanadate anions on the hot corrosion of preoxidized Ni by a thin fused Na2SO4 film at 900℃ [J]. J. Electrochem. Soc., 1990, 137: 53-60
[10] Johnson J B, Nicholls J R, Hurst R C, et al. The mechanical properties of surface scale on nickel-base superalloys-Ⅱ.Contaminate corrosion [J]. Corros. Sci., 1978, 18: 543-553
[11] McKee D W, Shores D A, Lurthra K L. The effect of SO2 and NaCl on high temperature hot corrosion [J]. J. Electrochem. Soc., 1978, 125(3): 411-419
[12] Xiong Y L, Wood S A. Experimental determination of the solubility of ReO2 and the dominant oxidation state of rhenium in hydrothermal solutions [J]. Chem. Geol., 1999, 158: 245-256
[13] Karunaratne M S A, Reed R C. Interdiffusion of the platinum-group metals in nickel at elevated temperature [J]. Acta Mater., 2003,51: 2905-2911
[14] Liu C T, Sun X F, Guan H R, et al. Effect of rhenium addition to a nickel-base single crystal superalloy on isothermal oxidation of the aluminide coating [J]. Surf. Coat.Technol., 2005, 194: 111-118

[1] CHEN Chao,LIANG Yanfen,LIANG Tianquan,MAN Quanyan,LUO Yidong,ZHANG Xiuhai,ZENG Jianmin. Research Progress on Hot Corrosion of Rare Earth Oxides Co-doped ZrO2 Ceramic Coatings in Molten Na2SO4+NaVO3 Salts[J]. 中国腐蚀与防护学报, 2019, 39(4): 291-298.
[2] Lijia YU,Wenping LIANG,Hao LIN,Qiang MIAO,Biaozi HUANG,Shiyu CUI. Evaluation of Hot Corrosion Behavior of Laser As-remelted YSZ Thermal Barrier Coatings at 950 ℃[J]. 中国腐蚀与防护学报, 2019, 39(1): 77-82.
[3] Hao CHEN,Qing CHEN,Li XIN,Long SHI,Shenglong ZHU,Fuhui WANG. Preparation and High Temperature Corrosion Behavior of Aluminized Nanocrystalline Coating on DD98M Alloy[J]. 中国腐蚀与防护学报, 2019, 39(1): 59-67.
[4] Xijing WANG, Boshi WANG, Chao YANG, Yan YANG, Bin SHEN. Hot Corrosion of Pure Nickel and Its Weld Joints in Molten Na2SO4-K2SO4 Salts[J]. 中国腐蚀与防护学报, 2018, 38(5): 495-501.
[5] Xizhong WANG,Jianhao WU,Hui PENG,Hongbo GUO,Shengkai GONG. Hot-gas Corrosion Resistance of La2Ce2O7/8YSZ Duble-ceramic-layered Thermal Barrier Coating[J]. 中国腐蚀与防护学报, 2017, 37(1): 36-40.
[6] Guangming LIU,Kangsheng LIU,Xiaofei MAO,Zhongping WAN,Jianhang HUANG,Mingming YU,Yuankui WANG. Hot Corrosion of T91 Steel in Molten Mixture of KCl+Na2SO4+K2SO4[J]. 中国腐蚀与防护学报, 2017, 37(1): 23-28.
[7] Bo YANG,Maodong LI,Guangming LIU,Yuankui WANG,Kangsheng LIU,Wei ZHAI,Jianhang HUANG. Hot Corrosion Behavior of Inconel 625/NiCr Coating Prepared by HOVF[J]. 中国腐蚀与防护学报, 2016, 36(5): 483-488.
[8] YAN Minsheng, HE Jin, MAO Shoudong, YANG Lijing, NIE Xia, SONG Zhenlun, ZHAN Zhaolin. Effect of NiCrAlY Coating on Oxidation Resistance of Sm2Co17 Magnets at High Temperatures[J]. 中国腐蚀与防护学报, 2015, 35(2): 183-188.
[9] WU Duoli, ZHANG Hongyu, WEI Hua, ZHENG Qi, JIN Tao, SUN Xiaofeng. Hot Corrosion Behavior of Four Modified Aluminide Coatings on DZ38G Alloy[J]. 中国腐蚀与防护学报, 2014, 34(6): 502-506.
[10] CHEN Qian, XIN Li, TENG Yingyuan, ZHU Shenglong, WANG Fuhui. EFFECT OF NITRIDE COATINGS ON THE CYCLIC OXIDATION BEHAVIOR OF TI6AL4V ALLOY[J]. 中国腐蚀与防护学报, 2012, 32(1): 7-12.
[11] WANG Li,LIU Chunyang,HAN Zhenyu, TONG Wenwei. HOT CORROSION BEHAVIOR AND EVALUATION OF TURBINE COMPONENTS AND MATERIALS USED FOR GAS TURBINE ENGINE[J]. 中国腐蚀与防护学报, 2011, 31(5): 399-403.
[12] XU Yangtao, XIA Tiandong, YAN Jianqiang. EFFECT OF ALLOYING ELEMENTS TO HOT CORROSION BEHAVIOR OF NOVEL Co-Al-W SUPERALLOY[J]. 中国腐蚀与防护学报, 2010, 30(6): 457-464.
[13] ZHU Ming LI Meishuan ZHOU Yanchun. HOT CORROSION RESISTANCE OF Cr1-xAlxN COATINGS ON A Ti3Al BASED ALLOY IN DEPOSITED (Na2SO4+K2SO4) MOLTEN SALT AT 800 ℃[J]. 中国腐蚀与防护学报, 2009, 29(4): 306-311.
[14] ;. STUDY OF HOT CORROSION RESISTANCES OF TWO NICKEL BASE SUPERALLOYS FOR DIRECTIONAL SOLIDIFICATION[J]. 中国腐蚀与防护学报, 2008, 28(5): 277-281 .
[15] . High Temperature Oxidation and Hot Corrosion Behavior of Enamel/Sputtered NiCrAlY Composite Coating[J]. 中国腐蚀与防护学报, 2005, 25(6): 344-350 .
No Suggested Reading articles found!