INFLUENCE OF ENVIRONMENTAL FACTORS ON THE MECHANICAL PROPERTIES OF COMPOSITES

J Chin Soc Corr Pro

2007, Vol. 27

Issue (2): 97-100 DOI:

Research Report

Current Issue | Archive | Adv Search

INFLUENCE OF ENVIRONMENTAL FACTORS ON THE MECHANICAL PROPERTIES OF COMPOSITES

;;;;;

北京航空航天大学材料学院

Download:

PDF(603KB)
Export: BibTeX | EndNote (RIS)

Abstract Carbon/epoxy composites were studied in this paper.In order to find the most important factors which could destroy the performance of the composite materials,corrosion tests were carried out by means of immersion.The test conditions were decided by the orthogonal tests of three factors i.e.temperature,concentration and the test period.The results showed that the immersion deteriorated the properties of composites,as well as that the solution temperature was the most important factor among the three factors.

Key words: carbon/epoxy composites corrosion immersion

Received: 25 September 2005

ZTFLH:

TB332

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

Cite this article:

;. INFLUENCE OF ENVIRONMENTAL FACTORS ON THE MECHANICAL PROPERTIES OF COMPOSITES. J Chin Soc Corr Pro, 2007, 27(2): 97-100 .

URL:

https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y2007/V27/I2/97

[1]Kaushal S,Tankala K,Rao R,et al.Some hygrothermal effects on themechanical behavior and fractography of glass-epoxy compositeswith modified interface[J].J.Mater.Sci,1991,26:6293-6299
[2]Haque A,Mahmood S,Walker L,et al.Moisture and temperature in-duced degradation in tensile properties of Kevlar-graphite/epoxyhybrid composites[J].Journal of Reinforced Plastics and Compos-ites,1991,10:132-145
[3]Selzer R,Friedrich K.Influence of water up-take on interlaminarfracture properties of carbon fibre-reinforced polymer composites[J].J.Mater.Sci.,1995,30:334-338
[4]Todd A Bullions,AC Loos,et al.Moisture sorption effects and prop-erties of a carbon fiber-reinforced phenylethynyl-terminated poly(etherimide)[J].Journal of Composite Materials,2003,37(9):791-808
[5]Hu H,Sun C T.The Equivalence of moisture and temperature inphysical aging of polymeric composites[J].Journal of Composite Ma-terials,2003,37(10):913-928
[6]Lagouvardos P E,Pissis P,Kyritsis A,Daoukaki D.Water sorptionand water-induced molecular mobility in dental composite resins[J]J.Mater.Sci:Materials in Medicine,2003,14:753-759
[7]Lu F,Zhang X Y,Tang Z H,et al.Galvanic corrosion behavior be-tween carbon fiber reinforced plastic materials and aluminum alloys[J].J.Chin.Soc.Corros.Prot.,2005,25(1):39-43(陆峰,张晓云,汤智慧等.碳纤维复合材料与铝合金电偶腐蚀行为研究[J].中国腐蚀与防护学报,2005,25(1):39-43)
[8]Mikita Y,Taya M.Stress field in a coated continuous fiber compositesubjected to thermo-mechanical loadings[J].Journal of CompositeMaterials,1985,19:554-578
[9]Theocaris P S,Demakos C B.The anisotropy effect on the stiffnessand toughness of encapsulated fiber composites[J].Journal of Rein-forced Plastics and Composites,1994,13:998-102
[10]Zhang L C,He F,Shi Y.Study of dewetting properties of compos-ites[J].Fiber Reinforced Plastics Composites,1999,10:11-17(张立晨,何峰,石勇.复合材料去湿性能研究[J].玻璃钢/复合材料,1999,10:11-17)

[1]	HUANG Peng, GAO Rongjie, LIU Wenbin, YIN Xubao. Fabrication of Superamphiphobic Surface for Nickel-plate on Pipeline Steel by Salt Solution Etching and Its Anti-corrosion Properties[J]. 中国腐蚀与防护学报, 2021, 41(1): 96-100.
[2]	DONG Xucheng, GUAN Fang, XU Liting, DUAN Jizhou, HOU Baorong. Progress on the Corrosion Mechanism of Sulfate-reducing Bacteria in Marine Environment on Metal Materials[J]. 中国腐蚀与防护学报, 2021, 41(1): 1-12.
[3]	TANG Rongmao, ZHU Yichen, LIU Guangming, LIU Yongqiang, LIU Xin, PEI Feng. Gray Correlative Degree Analysis of Q235 Steel/conductive Concrete Corrosion in Three Typical Soil Environments[J]. 中国腐蚀与防护学报, 2021, 41(1): 110-116.
[4]	HAN Yuetong, ZHANG Pengchao, SHI Jiefu, LI Ting, SUN Juncai. Surface Modification of TA1 Bipolar Plate for Proton Exchange Membrane Fuel Cell[J]. 中国腐蚀与防护学报, 2021, 41(1): 125-130.
[5]	ZHANG Yuxuan, CHEN Cuiying, LIU Hongwei, LI Weihua. Research Progress on Mildew Induced Corrosion of Al-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 13-21.
[6]	RAN Dou, MENG Huimin, LIU Xing, LI Quande, GONG Xiufang, NI Rong, JIANG Ying, GONG Xianlong, DAI Jun, LONG Bin. Effect of pH on Corrosion Behavior of 14Cr12Ni3WMoV Stainless Steel in Chlorine-containing Solutions[J]. 中国腐蚀与防护学报, 2021, 41(1): 51-59.
[7]	BAI Yunlong, SHEN Guoliang, QIN Qingyu, WEI Boxin, YU Changkun, XU Jin, SUN Cheng. Effect of Thiourea Imidazoline Quaternary Ammonium Salt Corrosion Inhibitor on Corrosion of X80 Pipeline Steel[J]. 中国腐蚀与防护学报, 2021, 41(1): 60-70.
[8]	ZUO Yong, CAO Mingpeng, SHEN Miao, YANG Xinmei. Effect of Mg on Corrosion of 316H Stainless Steel in Molten Salts MgCl₂-NaCl-KCl[J]. 中国腐蚀与防护学报, 2021, 41(1): 80-86.
[9]	WANG Yating, WANG Kexu, GAO Pengxiang, LIU Ran, ZHAO Dishun, ZHAI Jianhua, QU Guanwei. Inhibition for Zn Corrosion by Starch Grafted Copolymer[J]. 中国腐蚀与防护学报, 2021, 41(1): 131-138.
[10]	WANG Xintong, CHEN Xu, HAN Zhenze, LI Chengyuan, WANG Qishan. Stress Corrosion Cracking Behavior of 2205 Duplex Stainless Steel in 3.5%NaCl Solution with Sulfate Reducing Bacteria[J]. 中国腐蚀与防护学报, 2021, 41(1): 43-50.
[11]	SHI Kunyu, WU Weijin, ZHANG Yi, WAN Yi, YU Chuanhao. Electrochemical Properties of Nb Coating on TC4 Substrate in Simulated Body Solution[J]. 中国腐蚀与防护学报, 2021, 41(1): 71-79.
[12]	ZHENG Li, WANG Meiting, YU Baoyi. Research Progress of Cold Spraying Coating Technology for Mg-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 22-28.
[13]	WEI Zheng, MA Baoji, LI Long, LIU Xiaofeng, LI Hui. Effect of Ultrasonic Rolling Pretreatment on Corrosion Resistance of Micro-arc Oxidation Coating of Mg-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 117-124.
[14]	YU Hongfei, SHAO Bo, ZHANG Yue, YANG Yange. Preparation and Properties of Zr-based Conversion Coating on 2A12 Al-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 101-109.
[15]	ZHANG Hao, DU Nan, ZHOU Wenjie, WANG Shuaixing, ZHAO Qing. Effect of Fe³⁺ on Pitting Corrosion of Stainless Steel in Simulated Seawater[J]. 中国腐蚀与防护学报, 2020, 40(6): 517-522.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed