Please wait a minute...
中国腐蚀与防护学报  2012, Vol. 32 Issue (1): 64-66    
  研究报告 本期目录 | 过刊浏览 |
青铜器氯化物腐蚀产物的热分析
晏德付,秦颍,陈茜,黄凰
中国科学技术大学科技史与科技考古系 合肥 230026
THERMAL ANALYSIS OF THE CHLORIDE IN CORROSION PRODUCTS ON BRONZE
YAN Defu, QIN Ying, CHEN Xi, HUANG Huang
Department of Scientific History and Archaeometry, University of Science and Technology of China, Hefei 230026
全文: PDF(468 KB)  
摘要: 根除或有效控制有害的“粉状锈”是青铜器保护的关键技术。根据铜的氯化物在一定温度下易分解或挥发这一性质,本文利用热分析仪和X射线衍射(XRD)手段,对青铜试样表面生成的碱式氯化铜(Cu2Cl(OH)3)及氯化亚铜(CuCl)试剂粉末进行分析。结果表明,在大气环境中加热到350℃即可使氯铜矿分解,消除Cl-;CuCl在420℃~430℃融化并挥发,在600℃挥发急剧加速,实验条件下至789℃已完全挥发。
关键词 青铜器氯化物热分析XRD    
Abstract:The key technology of bronze protection is to control and exterminate the harmful “powdery rust”. Based on the character that copper chloride is easy to decompose and volatilize, this paper analyzed Cu2(OH)3Cl made from the surface of bronze samples and CuCl using thermal analyzer and X-ray diffraction(XRD). The results showed that the Cl- can be outrooted if copper chloride ore were heated up to 350℃ in the air. Besides, CuCl volatilized easily and the reaction accelerated at 600℃ and finished at 789℃
Key wordsbronze    chloride    thermal analysis    XRD
收稿日期: 2010-09-27     
ZTFLH: 

K876.41

 
通讯作者: 秦颍     E-mail: yingqin@uctc.edu.cn
Corresponding author: QIN Ying     E-mail: yingqin@uctc.edu.cn
作者简介: 晏德付,男,1987年生,硕士生,研究方向为文物保护与科技考古

引用本文:

晏德付,秦颍,陈茜,黄凰. 青铜器氯化物腐蚀产物的热分析[J]. 中国腐蚀与防护学报, 2012, 32(1): 64-66.
YAN De-Fu, QIN Ying. THERMAL ANALYSIS OF THE CHLORIDE IN CORROSION PRODUCTS ON BRONZE. J Chin Soc Corr Pro, 2012, 32(1): 64-66.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2012/V32/I1/64

[1] Zhong J R. Study on the conservation of bronzes and influential of powder rust[J]. J. Shanxi Univ. (Nat. Sci. Ed.),2004, 27(1): 44-47

    (钟家让.出土青铜器的锈蚀因素及其防护研究[J]. 山西大学学报(自然科学版), 2004,27(1): 44-47)

[2] Sun X Q. Study on the corrosion mechanisms and the conservation of bronzes[J]. World Antiq., 2002, 53(6): 56-60

    (孙晓强. 青铜器的腐蚀与保护探讨[J]. 文物世界, 2002, 53(6): 56-60)

[3] Fu H T, Li Y, Wei W J.Bronze artifacts preservation and application of AMT[J]. Corros. Sci. Prot. Technol., 2002, 14(1):36-37

    (付海涛, 李瑛, 魏无际.古代青铜文物保护研究现状及AMT的应用[J]. 腐蚀科学与防护技术, 2002,14(1): 36-37)

[4] Li Q, Shen Y P. Analysis and discussion of cleaning away powdery rust of bronze by laser technology[J]. Sci. Conserv.Archaeol., 1990, 2(1): 23-25

    (李荃, 沈引平.对激光清除青铜器粉状锈技术的分析和探讨[J]. 文物保护与考古科学, 1990,2(1): 23-25)

[5] Fan C Z, Wang C S, Wang S J, et al. Research on the forming mechanism of powdery rust on bronze[J]. Sci. China(Ser.B),1991, (3): 239-245

    (范崇正, 王昌燧, 王胜君等.青铜器粉状锈生成机理研究[J]. 中国科学(B辑), 1991, (3): 239-245)

[6] Chemical Society of Japan, Translated by An J L. Handbook of Inorganic Compounds[M]. Beijing: Chemical Industry Press, 1986:511-512

    (安家骆译, 日本化学会编.无机化合物合成手册(第二卷)[M]. 北京: 化学工业出版社, 1986: 511-512)

[7] Gu Y D, Xia Y. Dictionary of Chemistry[M]. Shanghai:Shanghai Lexicographical Publishing House, 1989: 928-929

    (顾翼东, 夏炎. 化学词典[M]. 上海: 上海辞书出版社, 1989: 928-929)

[8] Chen G X, Zhang Y M. Atlas of Mineral Thermal Analysis, Powdered-crystal Analysis and Phase Transition[M]. Chengdu: Sichuan Science Technology Press, 1989: 101

    (陈国玺, 张月明.矿物热分析粉晶分析相变图谱手册[M]. 成都: 四川科学技术出版社, 1989:101)

[9] Gao Q L. Fast electric heating technology on part of metal[P]. China Patent, 97106054, 1999

    (高庆雷.金属部件局部快速电加热技术[P]. 中国专利, 97106054, 1999)
[1] 左勇, 曹明鹏, 申淼, 杨新梅. MgCl2-NaCl-KCl熔盐体系中金属Mg对316H不锈钢的缓蚀性能研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 80-86.
[2] 黄凰,秦颍,徐劲松. 湖北鄂州出土青铜器锈蚀状况分析[J]. 中国腐蚀与防护学报, 2011, 31(1): 76-80.
[3] 华丽,郭兴蓬,杨家宽. Sn-0.7Cu焊料在覆Cu FR-4 PCB板上电化学腐蚀及枝晶生长行为研究[J]. 中国腐蚀与防护学报, 2010, 30(6): 469-474.
[4] 冯丽婷; 刘清; 包祥; 冯绍彬 . 青铜器加速腐蚀的多孔氧电极研究[J]. 中国腐蚀与防护学报, 2006, 26(3): 184-187 .
[5] 张展适; 陈少华; 陈障茹; 刘月妙 . 青铜文物腐蚀过程的模拟研究[J]. 中国腐蚀与防护学报, 2006, 26(2): 94-99 .
[6] 刘景军; 雍兴跃; 林玉珍; 李效玉 . 不锈钢在氯化物介质中的空泡腐蚀行为及机理[J]. 中国腐蚀与防护学报, 2005, 25(3): 157-162 .
[7] 蔡健平;郑逸苹;刘寿荣. 氯化物、硫污染物对碳钢大气腐蚀的协同作用[J]. 中国腐蚀与防护学报, 1996, 16(4): 303-306.
[8] 方智;吴荫顺;曹备;朱日彰. 奥氏体304不锈钢在活化态下的应力腐蚀与马氏体相变[J]. 中国腐蚀与防护学报, 1994, 14(4): 277-282.