环境因素对复合材料力学性能的影响

中国腐蚀与防护学报

2007, Vol. 27

Issue (2): 97-100

研究报告

本期目录 | 过刊浏览

环境因素对复合材料力学性能的影响

吕小军;张琦;项民;刁鹏;栗晓飞;谢国君

北京航空航天大学材料学院

INFLUENCE OF ENVIRONMENTAL FACTORS ON THE MECHANICAL PROPERTIES OF COMPOSITES

;;;;;

北京航空航天大学材料学院

全文: PDF(603 KB)

摘要: 以3234/G827 碳纤维增强复合材料为研究对象，利用正交试验的方法，选定三因素三水平的试验条件对复合材料进行盐水浸泡腐蚀试验.根据所取的3个环境因素即盐水浓度、溶液温度和浸泡时间，确定对复合材料力学性能影响最显著的因素是溶液温度.

关键词 ：碳纤维增强复合材料, 腐蚀失效, 溶液浸泡

Abstract：Carbon/epoxy composites were studied in this paper.In order to find the most important factors which could destroy the performance of the composite materials,corrosion tests were carried out by means of immersion.The test conditions were decided by the orthogonal tests of three factors i.e.temperature,concentration and the test period.The results showed that the immersion deteriorated the properties of composites,as well as that the solution temperature was the most important factor among the three factors.

Key words： carbon/epoxy composites corrosion immersion

收稿日期: 2005-09-25

ZTFLH:

TB332

通讯作者: 吕小军 E-mail: lxjun@mse.buaa.edu.cn

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	吕小军
	张琦
	项民
	刁鹏
	栗晓飞
	谢国君
44.8K

引用本文:

吕小军; 张琦; 项民; 刁鹏; 栗晓飞; 谢国君 . 环境因素对复合材料力学性能的影响[J]. 中国腐蚀与防护学报, 2007, 27(2): 97-100 .
. INFLUENCE OF ENVIRONMENTAL FACTORS ON THE MECHANICAL PROPERTIES OF COMPOSITES. J Chin Soc Corr Pro, 2007, 27(2): 97-100 .

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y2007/V27/I2/97

[1]Kaushal S,Tankala K,Rao R,et al.Some hygrothermal effects on themechanical behavior and fractography of glass-epoxy compositeswith modified interface[J].J.Mater.Sci,1991,26:6293-6299
[2]Haque A,Mahmood S,Walker L,et al.Moisture and temperature in-duced degradation in tensile properties of Kevlar-graphite/epoxyhybrid composites[J].Journal of Reinforced Plastics and Compos-ites,1991,10:132-145
[3]Selzer R,Friedrich K.Influence of water up-take on interlaminarfracture properties of carbon fibre-reinforced polymer composites[J].J.Mater.Sci.,1995,30:334-338
[4]Todd A Bullions,AC Loos,et al.Moisture sorption effects and prop-erties of a carbon fiber-reinforced phenylethynyl-terminated poly(etherimide)[J].Journal of Composite Materials,2003,37(9):791-808
[5]Hu H,Sun C T.The Equivalence of moisture and temperature inphysical aging of polymeric composites[J].Journal of Composite Ma-terials,2003,37(10):913-928
[6]Lagouvardos P E,Pissis P,Kyritsis A,Daoukaki D.Water sorptionand water-induced molecular mobility in dental composite resins[J]J.Mater.Sci:Materials in Medicine,2003,14:753-759
[7]Lu F,Zhang X Y,Tang Z H,et al.Galvanic corrosion behavior be-tween carbon fiber reinforced plastic materials and aluminum alloys[J].J.Chin.Soc.Corros.Prot.,2005,25(1):39-43(陆峰,张晓云,汤智慧等.碳纤维复合材料与铝合金电偶腐蚀行为研究[J].中国腐蚀与防护学报,2005,25(1):39-43)
[8]Mikita Y,Taya M.Stress field in a coated continuous fiber compositesubjected to thermo-mechanical loadings[J].Journal of CompositeMaterials,1985,19:554-578
[9]Theocaris P S,Demakos C B.The anisotropy effect on the stiffnessand toughness of encapsulated fiber composites[J].Journal of Rein-forced Plastics and Composites,1994,13:998-102
[10]Zhang L C,He F,Shi Y.Study of dewetting properties of compos-ites[J].Fiber Reinforced Plastics Composites,1999,10:11-17(张立晨,何峰,石勇.复合材料去湿性能研究[J].玻璃钢/复合材料,1999,10:11-17)

[1]	杨根柱,李庆华,刘国帅,王博,刘杰,熊金平,何少平,陆正良. W0714己内酰胺薄膜蒸发器下料管管壁腐蚀减薄失效分析[J]. 中国腐蚀与防护学报, 2011, 31(6): 488-492.
[2]	李春福王戎牛艳花朱泽华李天雷. 纳米掺杂对Al₂O₃+13%TiO₂等离子喷涂涂层耐蚀性能的影响[J]. 中国腐蚀与防护学报, 2008, 28(6期): 331-336.
[3]	王立世; 潘春旭; 蔡启舟; 魏伯康 . 镁合金表面微弧氧化陶瓷膜的腐蚀失效机理[J]. 中国腐蚀与防护学报, 2008, 28(4): 219-224 .
[4]	朱华; 甘复兴 . 铜银系导电复合材料腐蚀失效研究[J]. 中国腐蚀与防护学报, 2005, 25(4): 245-249 .
[5]	罗逸; 邓聚龙; 郑家shen . 腐蚀评估中的灰靶方法[J]. 中国腐蚀与防护学报, 2001, 21(6): 374-378 .

Viewed

Full text

Abstract

Cited

Shared

Discussed