Please wait a minute...
中国腐蚀与防护学报  2005, Vol. 25 Issue (4): 237-240     
  研究报告 本期目录 | 过刊浏览 |
渗铝钢的抗氢损伤性能
李华飞;徐金文;刘根凡
华中科技大学能源与动力工程学院
HYDROGEN DAMAGE RESISTANCE OF ALUMINIZED STEEL
;;
华中科技大学能源与动力工程学院
全文: PDF(120 KB)  
摘要: 采用钝化助镀法在30CrMo钢表面获得热浸铝层,通过扩散渗铝和调质处理获得了渗铝钢试片和试棒.用氢渗透电化学技术测量了渗铝钢在饱和H2S盐水中的渗氢曲线,得到了不同温度(T)下氢在渗铝钢中的扩散系数(D),拟合得到了T与D的关系式,并研究了溶液中NaCl和CO2对稳态氢渗透电流(Imax)的影响.比较了30CrMo渗铝钢在饱和H2S盐水中腐蚀前后的机械性能.结果表明:热浸渗铝钢对氢扩散有明显的阻滞作用,其抗氢损伤性能好于基体钢材.
关键词 热浸渗铝钢氢扩散抗氢损伤性能    
Abstract:Hot-dipped aluminum coating was made on the surface of 30CrMo sheet steel by passivation method.Testing samples were prepared after diffusing,quenching and high temperature tempering.The hydrogen diffusion curve of aluminized steel in hydrogen sulfide saturated salt water was measured with hydrogen penetration electrochemical technology,and the diffusion coefficient (D) of hydrogen in the aluminized steel and the temperature (T) dependence on D were obtained.The effects of NaCl and CO2 in the solution on steady hydrogen penetration current were also studied.Mechanical properties of the aluminized steel and its matrix steel were tested,before and after corrosion in hydrogen sulfide saturated salt water.The results showed that the aluminized steel obviously inhibited hydrogen diffusion and had better hydrogen damage resistance than the matrix steel.
Key wordshot dip aluminized steel    hydrogen diffusion    hydrogen d amage resistance
收稿日期: 2003-12-05     
ZTFLH:  TG174.443  
通讯作者: 李华飞   

引用本文:

李华飞; 徐金文; 刘根凡 . 渗铝钢的抗氢损伤性能[J]. 中国腐蚀与防护学报, 2005, 25(4): 237-240 .

链接本文:

https://www.jcscp.org/CN/Y2005/V25/I4/237

[1] Chen H. Failure analysis of the component parts of wellhead equip-ment[J].J.Southwest Petroleum Institute,1998,20(1);64-67(陈浩.采气井口装置主要零件的失效分析[J].西南石油学院学报,1998,20(1):64-67)
[2] Ding Q R. Property of aluminized steel and its application in petrochemical industry [J]. China Petroleum Machinery, 1999,27(5)?52 -54(丁庆如.渗铝钢的性能及在石油化工装备中的应用[J].石油化工设备技术,1999,27(5):52-54)
[3] Chen J F. Hydrogen diffusion behavior of hot dip aluminum steel [J]. Corros. Sci. Prot.Technol., 1997,9(3):244 - 246(陈家福.热浸镀铝钢氢的扩散[J].腐蚀科学与防护技术,1997,9(3):244-246)
[4] Li H F, Zheng J S, Yu D Y. Study on hot - dip 55% Al - Zn alloying process of steel sheet[J]. New Technology & New Process, 2001, 1:39-42(李华飞,郑家燊,俞敦义.钢板热浸镀55%Al-Zn合金新工艺[J].新技术新工艺,2001,1:39-42)
[5] Wu Y S, Fang Z, Cao B. Corrosion Experiments and Protection Testing Technology[M]. Beijing: Chemical Industry Press, 1996: 226-228(吴荫顺,方智,曹备.腐蚀试验方法与防腐蚀检测技术[M].北京:化学工业出版社,1996:226-228)
[1] 柯书忠, 刘静, 黄峰, 王贞, 毕云杰. 预应变对DP600钢氢脆敏感性的影响[J]. 中国腐蚀与防护学报, 2018, 38(5): 424-430.
[2] 王艳飞,巩建鸣,唐建群,蒋旺,姜莹洁. 冷拔残余应力应变对钢丝氢扩散过程的影响[J]. 中国腐蚀与防护学报, 2011, 31(3): 202-207.
[3] 傅朝阳;郑家燊. 钻井液中碳钢的氢扩散和腐蚀疲劳行为[J]. 中国腐蚀与防护学报, 1997, 17(4): 263-268.
[4] 路民旭;郑修麟. 超高强度钢CF裂纹扩展的超载效应 Ⅰ.定量模型及预测[J]. 中国腐蚀与防护学报, 1994, 14(3): 184-192.