堆焊结构的氢浓度分布及其对剥离断裂的影响

中国腐蚀与防护学报

1995, Vol. 15

Issue (2): 112-118

研究报告

本期目录 | 过刊浏览

堆焊结构的氢浓度分布及其对剥离断裂的影响

徐颖;袁路平;林栋梁;林建鸿;王正东;吴东棣

上海交通大学;华东理工大学

EFFECTS OF DISTRIBUTION OF HYDROGEN CONCENTRATION ON DISBONDING FOR STAINLESS STEEL WELD OVERLAY

Xu Ying; Yuan Luping; Lin Dongliang(T. L. Lin)(Shanghai Jiao Tong Univ.)Lin Jianhong; Wang Zhengdong; Wu Dongdi(East China Univ. of Chemical Technology)

全文: PDF(515 KB)

摘要: 采用有限元分析方法计算堆焊结构中氢浓度的分布，并将电解充氢试验条件下试块中氢扩散行为的计算结果和高压釜试验条件的计算结果进行对比分析．计算结果表明，采用电解充氢方法，可以在熔合线附近获得与高压釜充氢数值相近的氢浓度峰值，而到达这一峰值的时间较短．通过解析模型比较了不同试样条件和电解充氢条件对试验结果的影响．结果显示，增大充氢电流密度，延长充氢时间，减薄母材厚度，均使氢浓度峰值升高，从而使堆焊层剥离倾向增大．

关键词 ：堆焊, 氢分布, 剥离

Abstract：The finite element method was adopted to compute the distribution of hydrogen concentration inweld overlay structures. Comparison between the computed results for the hydrogen diffusion behaviour under electrolytic hydrogen charging and those under gaseous hydrogen charging in autoclave was carriedout. The results showed that in both cases the peak hydrogen concentrations near the fusion line aresimilar and can be reached in a shorter time under electrolytic hydrogen charging.The factors affecting hydrogen-induced disbonding were studied through a serieS of theoretical computation, and the influence of different specimen conditions and different test conditions were analyzed.The results showed that the increase of current density, the prolongation of charging time and/or thethinning of the base metal will inerease the peak hydrogen concentration and enhance the tendency ofdisbonding.

Key words： Weld overlay Hydrogen concentration Disbonding

收稿日期: 1995-04-25

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	徐颖
	袁路平
	林栋梁
	林建鸿
	王正东
	吴东棣
44.8K

引用本文:

徐颖;袁路平;林栋梁;林建鸿;王正东;吴东棣. 堆焊结构的氢浓度分布及其对剥离断裂的影响[J]. 中国腐蚀与防护学报, 1995, 15(2): 112-118.
. EFFECTS OF DISTRIBUTION OF HYDROGEN CONCENTRATION ON DISBONDING FOR STAINLESS STEEL WELD OVERLAY. J Chin Soc Corr Pro, 1995, 15(2): 112-118.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1995/V15/I2/112

FujiA,etal．StudyonaStainlessSteelOverlayWeldingProcessforSuperiorResistancetoDisbonding(Report6),unpublished．2EnriettoJF．UndercladCracks-TheirNature,DetectionandConsequences,PerformanceofPressureVesselswithCladandOverlsyedStainlessSteelLinings,MPC-16,ASME,1981,p．21-313PressouyreGM．FirstInternationalConferenceonCurrentSolutionstotheHydrogenProblems,WashingtonD．C,1982,184徐颖．不锈钢堆焊界面氢分布的计算,第四届华东计算力学学术交流会,94年5月,中国福建5徐颖．华东化工学院博士学位论文,1992年6YingXu,etal．ATheoreticalModelofCrackNucleationInMetals,InternationalSymposiumonFractureandStrengthofSolids,94年7月,中国西安7林建鸿．华东化工学院博士学位论文,1992年8华东化工学院,中国石化通用机械工程总公司,上海锅炉厂．热壁加氢反应器堆焊层剥离的影响因素及对策,1991年10月

[1]	王贵容,邵亚薇,王艳秋,孟国哲,刘斌. 阴极保护电位对破损环氧涂层阴极剥离的影响[J]. 中国腐蚀与防护学报, 2019, 39(3): 235-244.
[2]	陈亚林, 张伟, 王琦, 王佳. WBE技术研究水线区破损涂层的剥离机制-II[J]. 中国腐蚀与防护学报, 2017, 37(4): 322-328.
[3]	陈亚林,张伟,丁葵英,王佳,尹鹏飞,董彩常,杨万国. WBE技术研究水线区破损涂层的剥离机制[J]. 中国腐蚀与防护学报, 2016, 36(1): 67-72.
[4]	钟曼英. 氢对2(1/4)Cr-1Mo钢力学性能的影响[J]. 中国腐蚀与防护学报, 2011, 31(3): 236-239.
[5]	赵增元; 王佳 . 有机涂层阴极剥离作用研究进展[J]. 中国腐蚀与防护学报, 2008, 28(2): 116-120 .
[6]	徐坚; 钟曼英; 郭世行 . 加氢反应器壁材料的氢损伤特性[J]. 中国腐蚀与防护学报, 2003, 23(3): 149-155 .

Viewed

Full text

Abstract

Cited

Shared

Discussed