Please wait a minute...
J Chin Soc Corr Pro  2007, Vol. 27 Issue (3): 172-175     DOI:
Research Report Current Issue | Archive | Adv Search |
Study on anti-resistance of various silanization pretreatment on aluminium alloys surface
;;
西北工业大学化工系
Download:  PDF(283KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  In order to see about anti-corrosion of silanization pretreatment on aluminium alloys surface, YL12 Al aloys surface were treated with γ- glycidoxypropyltrimentoxysilane(GPTMS),bis- [triethoxysilylpropyl] tetrasulfide(BTSPS) and bis-1,2-(triethoxysilyl) - ethane (BTSE)by dip-coating process. GPTMS and bis - silane films layer were cured at 100 ℃ for 60min and 130℃ for 60min respectively. Corrosion resistance of various silane silanization films layer were tested with potentiodynamic scan (PDS) and electrochemical impedance spectroscopy (EIS)in 3.5mass% NaCl solution and compared with that of chromated conversion coatings. The results show that the corrosion resistance of bis - silanization film layer exceeded that of organofunctional silane, the antiresistance of BTSPS silanization film layer exceeded that of all others.
Key words:  silanization      pretreatment      anti-resistance      bis-silane      
Received:  25 November 2005     
ZTFLH:  TG17  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

Cite this article: 

. Study on anti-resistance of various silanization pretreatment on aluminium alloys surface. J Chin Soc Corr Pro, 2007, 27(3): 172-175 .

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2007/V27/I3/172

[1]Aramaki K.The inhibition e.ects of chromate-free,anion inhibitorson corrosion of zinc in aerated 0.5 mol/L NaCl[J].Corros.Sci.,2001,43:591~604
[2]Aramaki K.The inhibition effects of cation inhibitors on corrosion ofzinc in aerate 0.5mol/L NaCl[J].Corros.Sci.,2001,43:1573~1588
[3]Underhill P R,Goring G,Du QD.Astudy of the curing of3-glyci-doxypropyltrimethoxy silane films on aluminum[J].InternationalJournal Adhesion&Adhesives,1998,18:313-317
[4]Underhill P R,Goring G,Du Q D.A study of the deposition of 3-glycidoxypropyltrimethoxysilane on aluminum[J].International Jour-nal Adhesion&Adhesives,1998,18:308-311
[5]Underhill P R,Goring G,Du QD.The drying of3-glycidoxypropyl-trimethoxy silane[J].Appl.Surf.Sci.,1998,134:247-253
[6]Sang I S,Kim J H,Choi K H,et al.Preparation of corrosion protec-tive coatings on galvanized iron from aqueous inorganic-organic hy-brid sols by sol-gel method[J].Surf.Coat.Technol.,2006,200(11):3468-3472
[7]Franquet A,Laet J D,Schram T,et al.Determination of the thicknessof thin silane films on aluminium surfaces by means of spectroscopicellipsometry[J].Thin Solid Films,2001,384:37-45
[8]Susac D,Sun X,Mitchell K A R.Adsorption of BTSE andγ-APSorganosilanes on different microstructural regions of2024-T3 alumi-num alloy[J].Appl.Surf.Sci.,2003,207:40-50
[9]Teo M,Kim J,Wong P C,et al.Investigations of interfaces formedbetween bis-1,2-(triethoxysilyl)ethane(BTSE)and aluminumafter different forest product laboratory pre-treatment times[J].Ap-pl.Surf.Sci.,2004,221:340-348
[10]Teo M,Kim J,Wong P C,et al.Pre-treatments applied to oxidizedaluminum surfaces to modify the interfacial bonding with bis-1,2-(triethoxysilyl)ethane(BTSE)Part I.High-purity Al with n-ative oxide[J].Appl.Surf.Sci.,2005,252(15):1293-1304
[11]Kim J,Teo M,Wong P C,et al.Pre-treatments applied to oxidizedaluminum surfaces to modify the interfacial bonding with bis-1,2-(triethoxysilyl)ethane(BTSE)Part II.Anodized 7075-T6 Alalloy[J].Appl.Surf.Sci.,2005,252(15):1305-1312
[12]Van Ooij W J,Zhu D.Electrochemical impedance spectroscopy ofbis-[triethoxysilypropyl]tetrasulfide on Al 2024-T3 substrates[J].Corrosion,2001,57(5):413-427
[13]Zhu D Q,Van Ooij W J.Corrosion protection of AA 2024-T3 bybis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloridesolution.Part 1 corrosion of AA2024-T3[J].Corros.Sci.,2003,45:2163-2175
[14]Zhu D Q,Van Ooij W J.Corrosion protection of AA 2024-T3 bybis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloridesolution.Part 2:mechanism for corrosion protection[J].Corros.Sci.,2003,345:2177-2197
[15]Cabral A,Duarte R G,Montemor M F,et al.Analytical characteri-sation and corrosion behaviour of bis-[triethoxysilylpropyl]tetra-sulphide pre-treated AA2024-T3[J].Corros.Sci.,2005,47:869-881
[16]Franquet A,Le P C,Terryn H,et al.Effect of bath concentrationand curing time on the structure nonfunctional thin organosilanelayers on aluminium[J].Electrochim.Acta,2003,48:1245~1255
[17]Cao C N,Zhang J Q.An Introduction to EIS for Electrode Proces-ses[M].Beijing:Science Press,2002,7(曹楚南,张鉴清著.电化学阻抗谱导论[M].北京:科学出版社,2002,7)
[1] LI Junming, XUE Xiaonan, WANG Aijuan, MA Anbo, FU Zhizhao. ELECTROLESS NICKEL PLATING OF MAGNESIUM ALLOY WITH MICROARC OXIDATION PRETREATMENT[J]. 中国腐蚀与防护学报, 2012, 32(1): 23-27.
[2] CAI Zongping LV Dongsheng LI Weishan LIANG Ying. EFFORT OF SILANE COUPLING AGENTS ON THE ADHERENCE OF MAGNESIUM ELECTRODE[J]. 中国腐蚀与防护学报, 2009, 29(3): 199-204.
[3] WANG Bumei XUE Feng SUN Yangshan JIA Chunping TAO Weijian. PRETREATMENT FOR ELECTROPLATING OF MAGNESIUM ALLOY[J]. 中国腐蚀与防护学报, 2009, 29(1): 24-29.
[4] . Influence of Pretreatment on the Adhesion of Electroless Nickel Planting on Magnesium Alloy[J]. 中国腐蚀与防护学报, 2006, 26(4): 221-226 .
[5] Chuanwei Yan. EIS Study On The Anti-corrosion Performance of Polymer/Dacromet Composite Systems in 3.5% NaCl Solution[J]. 中国腐蚀与防护学报, 2006, 26(2): 89-93 .
No Suggested Reading articles found!