Please wait a minute...
Journal of Chinese Society for Corrosion and protection  2012, Vol. 32 Issue (6): 501-506    DOI:
Current Issue | Archive | Adv Search |
PULSE ELECTRODEPOSITION OF NICKEL MATRIX ALLOY COATINGS WITH HIGH CONTENT OF PHOSPHORUS
CHEN Ye, FEI Jingyin, WANG Lei, WAN Binghua
School of Science, Northwestern Polytechnical University, Xi’an 710129
Download:  PDF(2021KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

This paper discussed the influence of pulse parameters (pulse height, pulse width and reverse pulse variables) on the phosphorous content and morphology of Ni-P coatings. The result showed that both average current density and reverse anodic current density had a strong effect on the phosphorous content, whereas duty circle and frequency had great impact on the morphology of coatings. Compared with the Ni-P coatings prepared via direct current electrodeposition, pulse plating method increases the content of phosphorous without changing the composition of the solution.

Key words:  Ni-P alloy coatings      pulse electrodeposition      alloy plating     
Received:  29 November 2011     
ZTFLH:  TQ153.2  
Corresponding Authors:  FEI Jingyin     E-mail:  jyfei@nwpu.edu.cn

Cite this article: 

CHEN Ye, FEI Jingyin, WANG Lei, WAN Binghua. PULSE ELECTRODEPOSITION OF NICKEL MATRIX ALLOY COATINGS WITH HIGH CONTENT OF PHOSPHORUS. Journal of Chinese Society for Corrosion and protection, 2012, 32(6): 501-506.

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2012/V32/I6/501

 


[1] Hajdu J. Electroless plating: The past is prologue[J]. Plat. Surf. Finish., 1996, 83(9): 29-33

[2] Williams J E, Davison C. Review of the capabilities and properties of electroless plated thin film media for rigid memory disks[J]. J. Electrochem. Soc., 1990, 137(10): 3260-3269

[3] Osmola D, Nolan P, Erb U, et al. Microstructural evolution at large driving forces during grain growth of ultrafine-grained Ni-1.2wt%P[J]. Physica Status Solidi (a), 1992, 131(2): 569-575

[4] Robertson A, Erb U, Palumbo G. Practical applications for electrodeposited nanocrystalline materials[J]. Nanostruct. Mater., 1999, 12(5-8): 1035-1040

[5] Lin C S, Lee C Y, Chen F J, et al. Structural evolution and internal stress of nickel-phosphorus electrodeposits[J]. J. Electrochem. Soc., 2005, 152(6), 370-375

[6] Park H D, Chang D, Lee K H, et al. Internal stress in Ni-P electrodeposits[J]. Plat. Surf. Finish., 2001, 88(12), 64-66

[7] Lin C S, Lee C Y, Chen F J, et al. Electrodeposition of nickel-phosphorus alloy from sulfamate baths with improved current efficiency[J]. J. Electrochem. Soc., 2006, 153(6): 387-392

[8] Hou K H, Hwu W H, Ke S T, et al. Ni-P-SiC composite produced by pulse and direct current plating[J]. Mater. Chem. Phy., 2006, 100(1), 54-59

[9] Lashmore D S, Weinroth J F. Pulsed electrodeposition of nickel-phosphorus metallic glass alloys[J]. Plat. Surf. Finish., 1982, 69(8), 72-76

[10] Chen F J, Pan Y N, Lee C Y, et al. Internal stress control of nickel-phosphorus electrodeposits using pulse currents[J]. J. Electrochem. Soc., 2010, 157(3): 154-158

[11] Pouderoux P, Chassaing I, Bonino J P, et al. Plating of nickel-phosphorus multilayer alloys: current pulse effects on the microstructural and mechanical properties[J]. Surf. Coat. Technol., 1991, 45(1-3), 161-170

[12] Fei J Y, Liang G Z, Xin W L. Composition and morphology of Zn-Co alloy coatings deposited by means of pulse plating containing reverse current[J]. J. Wuhan Univ. Techn. Mater., 2007, 22(3), 417-421

[13] Kuruma K, Yamada K, Sato K, et al. The Effect of crystal structure on hardness in electroplated Ni-P films[J]. J. Surf. Finish. Soc. Jpn., 1991, 42(10), 1013-1018

[14] Marshall G W, Lewis D B, Clayton D, et al. The electrodeposition of Ni-P-Al2O3 deposits[J]. Surf. Coat. Technol., 1997, 96(2), 353-358

[15] Choo R T C, Toguri J M, Erb U, et al. Mass transfer and electrocrystallization analyses of nanacrystalline nickel production by pulse plating[J]. J. Appl. Electrochem., 1995, 25(4): 34-403

[16] TAN J, GUO W C, XU B S, et al. Corrosion resistance of Ni/n-SiO2 composite coatings by pulse-reverse brush plating[J]. J. Chin. Soc. Corros. Prot., 2006, 26(4): 193-196

(谭俊, 郭文才, 徐滨士等. 脉冲换向电刷镀镍基纳米SiO2复合镀层的耐腐蚀性能研究[J]. 中国腐蚀与防护学报, 2006, 26(4): 193-196)

[17] Zoikis-Karathanasis A, Pavlatou E A, Spyrellis N. Pulse electrodeposition of Ni-P matrix composite coatings reinforced by SiC particles[J]. J. Alloys Compd., 2010, 494(1-2), 396-403

[1] ZHANG Wuhua,FEI Jingyin,LUO Lili,LIN Xihua. High Speed Pulse Electro Plating Process of Nickel[J]. 中国腐蚀与防护学报, 2013, 33(4): 317-324.
[2] . CORROSION RESISTANCE OF ELECTROLESSNi COATINGS ON SiCp/Al COMPOSITE AND MECHANISM[J]. 中国腐蚀与防护学报, 2006, 26(3): 160-165 .
No Suggested Reading articles found!