| [1] Fergus J, Metallic interconnects for solid oxide fuel cells [J]. Mater. Sci. Eng., 2005, A397(1-2): 271-283 [2] Zhu W Z, Deevi S C. Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance [J]. Mater. Res. Bull., 2003, 38(6): 957-972 [3] Fergus J W. Lanthanum chromite-based materials for solid oxide fuel cell interconnects [J]. Solid State Ionics, 2004, 171(1-2): 1-15 [4] Mori M, Wang Z, Itoh T. A-Site and B-Site non-stoichiometry and sintering characteristics of (Sr1-xLax)1-yTi1-zO3 perovskites [J]. J. Fuel Cell Sci. Technol., 2011, 8(5): 1014-1017 [5] Mori M, Wang Z, Serizawa N. Evaluation of SrTi1-xCoxO3 Perovskites (0≤x≤0.2) as interconnect materials for solid oxide fuel cells [J]. J. Fuel Cell Sci. Technol., 2011, 8(5): 1010-1015 [6] Church B C, Sanders T H, Speyer R F, et al. Thermal expansion matching and oxidation resistance of Fe-Ni-Cr interconnect alloys [J]. Mater. Sci. Eng., 2007, A452: 334-340 [7] Yang Z. Recent advances in metallic interconnects for solid oxide fuel cells [J]. Int. Mater. Rev., 2008, 53(1): 39-54 [8] Ebbinghaus B B. Thermodynamics of gas-phase chromium species-the chromium oxides, the chromium oxyhydroxides, and volatility calculations in waste incineration processes[J]. Combust. Flame, 1993, 93(1-2): 119-137 [9] Wu J, Liu X. Recent development of SOFC metallic interconnect [J]. J. Mater. Sci. Technol., 2010, 26(4): 293-305 [10] Shaigan N, Qu W. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects [J]. J. Power Sources, 2010, 195(6): 1529-1542 [11] Li X, Lee J W, Popov B N. Performance studies of solid oxide fuel cell cathodes in the presence of bare and cobalt coated E-brite alloy interconnects [J]. J. Power Sources, 2009, 187(2): 356-362 [12] Chu C L, Lee J, Lee T H. Oxidation behavior of metallic interconnect coated with La-Sr-Mn film by screen painting and plasma sputtering [J]. Int. J. Hydrogen Energy, 2009, 34(1): 422-434 [13] Tu H Y, Stimming U. Advances, aging mechanisms and lifetime in solid-oxide fuel cells [J]. J. Power Sources, 2004, 127(1-2): 284-293 [14] Yang Z G, Xia G G, Wang C H, et al. Investigation of iron-chromium-niobium-ferritic stainless steel for solid oxide fuel cell interconnect application [J]. J. Power Sources, 2008, 183(2): 660-667 [15] Quadakkers W J, Paul I L, Hattendorf H, et al. Crofer 22H-a new high strength ferritic steel for interconnectors in SOFC[J]. Fuel Cell Symposium[C]. San Antonio: 2010 [16] Paldey S, Deevi S C. Properties of single layer and gradient (Ti,Al)N coatings [J]. Mater. Sci. Eng. A-Struct. Mater., 2003, 361(1-2): 1-8 [17] Pederson L, Singh P, Zhou X. Application of vacuum deposition methods to solid oxide fuel cells [J]. Vacuum, 2006, 80(10): 1066-1083 [18] Gannon P E, Tripp C T, Knospe A K, et al. High-temperature oxidation resistance and surface electrical conductivity of stainless steels with filtered arc Cr-Al-N multilayer and/or superlattice coatings [J]. Surf. Coat. Technol., 2004, 188-189: 55-61 [19] Kayani A, Smith R, Teintze S, et al. Oxidation studies of CrAlON nanolayered coatings on steel plates [J]. Surf. Coat. Technol., 2006, 201(3-4): 1685-1694 [20] Liu X, Johnson C, Li C, et al. Developing TiAlN coatings for intermediate temperature solid oxide fuel cell interconnect applications [J]. Int. J. Hydrogen Energy, 2008, 33(1): 189-196 [21] Wu J, Li C, Johnson C, et al. Evaluation of SmCo and SmCoN magnetron sputtering coatings for SOFC interconnect applications [J]. J. Power Sources, 2008, 175(2): 833-840 [22] Qi H B, Lees D G. The effects of surface-applied oxide films containing varying amounts of yttria, chromia, or alumina on the high-temperature oxidation behavior of chromia-forming and alumina-forming alloys [J]. Oxid. Met., 2000, 53(5): 507-527 [23] Pint B A. Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect [J]. Oxid. Met., 1996, 45(1-2): 1-37 [24] Hou P Y, Stringer J. Effect of surface-applied reactive element oxide on the oxidation of binary alloys containing Cr [J]. J. Electrochem. Soc., 1987, 134(7): 1836-1849 [25] Hou P Y. Sulfur segregation to growing Al2O3 alloy interfaces [J]. J. Mater. Sci. Lett., 2000, 19(7): 577-578 [26] Hou P Y. Beyond the sulfur effect [J]. Oxid. Met., 1999, 52(3): 337-351 [27] Allam I M, Whittle D P, Stringer J. Improvements in oxidation resistance by dispersed oxide addition: Al2O3-forming alloys [J]. Oxid. Met., 1979, 13(4): 381-401 [28] Cueff R, Buscail H, Caudron E, et al. Oxidation behaviour of Kanthal APM and Kanthal AF at 1173 K: effect of yttrium alloying addition [J]. Surf. Eng., 2003, 19(1): 58-64 [29] Riffard F, Buscail H, Caudron E, et al. Yttrium sol-gel coating effects on the cyclic oxidation behaviour of 304 stainless steel [J]. Corros. Sci., 2003, 45(12): 2867-2880 [30] Ul-Hamid A. TEM study of the effect of Y on the scale microstructures of Cr2O3 and Al2O3 forming alloys [J]. Oxid. Met., 2002, 58(1): 23-40 [31] Fontana S, Amendola R, Chevalier S, et al. Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys [J]. J. Power Sources, 2007, 171(2): 652-662 [32] Piccardo P, Amendola R, Fontana S, et al. Interconnect materials for next-generation solid oxide fuel cells [J]. J. Appl. Electrochem., 2009, 39(4): 545-551 [33] Fontana S, Chevalier S, Caboche G. Metallic interconnects for solid oxide fuel cell: Effect of water vapour on oxidation resistance of differently coated alloys [J]. J. Power Sources, 2009, 193(1): 136-145 [34] Ramanarayanan T A, Ayer R, Petkovicluton R, et al. The influence of yttrium on oxide scale growth and adherence [J]. Oxid. Met., 1988, 29(5-6): 445-472 [35] Cotell C M, Yurek G J, Hussey R J, et al. The influence of grain-boundary segregation of Y in Cr2O3 on the oxidation of Cr metal. 2. effects of temperature and dopant concentration [J]. Oxid. Met., 1990, 34(3-4): 201-216 [36] Pieraggi B, Rapp R A. Chromia scale growth in alloy oxidation and the reactive element effect [J]. J. Electrochem. Soc., 1993, 140(10): 2844-2850 [37] Zhu J. LaCrO3-based coatings on ferritic stainless steel for solid oxide fuel cell interconnect applications [J]. Surf. Coat. Technol., 2004, 177-178: 65-72 [38] Johnson C. Nano-structured self-assembled LaCrO3 thin film deposited by RF-magnetron sputtering on a stainless steel interconnect material [J]. Composites B, 2004, 35(2): 167-172 [39] Johnson C, Orlovskaya N, Coratolo A, et al. The effect of coating crystallization and substrate impurities on magnetron sputtered doped LaCrO3 coatings for metallic solid oxide fuel cell interconnects [J]. Int. J. Hydrogen Energy, 2009, 34(5): 2408-2415 [40] Yang Z, Xia G, Maupin G, et al. Conductive protection layers on oxidation resistant alloys for SOFC interconnect applications [J]. Surf. Coat. Technol., 2006, 201(7): 4476-4483 [41] Yang Z, Xia G G, Maupin G D, et al. Evaluation of perovskite overlay coatings on ferritic stainless steels for SOFC interconnect applications [J]. J. Electrochem. Soc., 2006, 153(10): A1852-A1858 [42] Lee C, Bae J. Oxidation-resistant thin film coating on ferritic stainless steel by sputtering for solid oxide fuel cells [J]. Thin Solid Films, 2008, 516(18): 6432-6437 [43] Choi J J, Lee J H, Park D S, et al. Oxidation resistance coating of LSM and LSCF on SOFC metallic interconnects by the aerosol deposition process [J]. J. Am. Ceram. Soc., 2007, 90(6): 1926-1929 [44] Mikkelsen L, Chen M, Hendriksen P, et al. Deposition of La0.8Sr0.2Cr0.97V0.03O3 and MnCr2O4 thin films on ferritic alloy for solid oxide fuel cell application [J]. Surf. Coat. Technol., 2007, 202(4-7): 1262-1266 [45] Petric A, Ling H. Electrical conductivity and thermal expansion of spinels at elevated temperatures [J]. J. Am. Ceram. Soc., 2007, 90(5): 1515-1520 [46] Burriel M, Garcia G, Santiso J, et al. Co3O4 protective coatings prepared by pulsed injection metal organic chemical vapour deposition [J]. Thin Solid Films, 2005, 473(1): 98-103 [47] Deng X, Wei P, Bateni M, et al. Cobalt plating of high temperature stainless steel interconnects [J]. J. Power Sources, 2006, 160(2): 1225-1229 [48] Yang Z, Xia G, Simner S P, et al. Thermal growth and performance of manganese cobaltite spinel protection layers on ferritic stainless steel SOFC interconnects[J]. J. Electrochem. Soc., 2005, 152(9): A1896-A1901 [49] Yang Z G, Maupin G, Simner S, et al. Advanced Interconnect Development [A]. The 6th SECA Annual Workshop [C]. Pacific Grove: 2005 [50] Yang Z, Xia G, Li X, et al. (Mn,Co)3O4 spinel coatings on ferritic stainless steels for SOFC interconnect applications [J]. Int. J. Hydrogen Energy, 2007, 32(16): 3648-3654 [51] Wu J, Johnson C D, Jiang Y, et al. Pulse plating of Mn-Co alloys for SOFC interconnect applications [J]. Electrochim. Acta, 2008, 54(2): 793-800 [52] Wu J, Johnson C D, Gemmen R S, et al. The performance of solid oxide fuel cells with Mn-Co electroplated interconnect as cathode current collector [J]. J. Power Sources, 2009, 189(2): 1106-1113 [53] Wu J, Gemmen R S, Manivannan A, et al. Investigation of Mn/Co coated T441 alloy as SOFC interconnect by on-cell tests [J]. Int. J. Hydrogen Energy, 2011, 36(7): 4525-4529 [54] Gorokhovsky V I, Gannon P E, Deibert M C, et al. Deposition and evaluation of protective PVD coatings on ferritic stainless steel SOFC interconnects [J]. J. Electrochem. Soc., 2006, 153(10): A1886-A1893 [55] Balland A, Gannon P, Deibert M, et al. Investigation of La2O3 and/or (Co,Mn)3O4 deposits on Crofer22 APU for the SOFC interconnect application [J]. Surf. Coat. Technol., 2009, 203(20-21): 3291-3296 [56] Montero X, Tietz F, Sebold D, et al. MnCo1.9Fe0.1O4 spinel protection layer on commercial ferritic steels for interconnect applications in solid oxide fuel cells [J]. J. Power Sources, 2008, 184(1): 172-179 [57] Huang W H, Gopalan S, Pal U B, et al. Evaluation of electrophoretically deposited CuMn1.8O4 spinel coatings on Crofer22 APU for solid oxide fuel cell interconnects [J]. J. Electrochem. Soc., 2008, 155(11): B1161-B1167 [58] Bateni M, Wei P, Deng X, et al. Spinel coatings for UNS 430 stainless steel interconnects [J]. Surf. Coat. Technol., 2007, 201(8): 4677-4684 [59] Piccardo P, Gannon P, Chevalier S, et al. ASR evaluation of different kinds of coatings on a ferritic stainless steel as SOFC interconnects [J]. Surf. Coat. Technol., 2007, 202(4-7): 1221-1225 [60] Chen H, Lucas J A, Priyantha W, et al. Thermal stability and oxidation resistance of TiCrAlYO coatings on SS430 for solid oxide fuel cell interconnect applications [J]. Surf. Coat. Technol., 2008, 202(19): 4820-4824 [61] Gannon P, Deibert M, White P, et al. Advanced PVD protective coatings for SOFC interconnects [J]. Int. J. Hydrogen Energy, 2008, 33(14): 3991-4000 |
